Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

Influence of SiC content on the oxidation of carbon fibre reinforced ZrB2/SiC composites at 1500 and 1650 °C in air

The microstructure and the oxidation resistance in air of continuous carbon fibre reinforced ZrB₂–SiC ceramic composites were investigated. SiC content was varied between 5–20?vol.%, while maintaining fibre content at ～40?vol.%. Short term oxidation tests in air were carried out at 1500 and 1650?°C in a bottom-up loading furnace. The thickness, composition and microstructure of the resulting oxide scale were analysed by SEM-EDS and X-Ray diffraction. The results show that contents above 15?vol.% SiC ensure the formation of a homogeneous protective borosilicate glass that covers the entire sample and minimizes fibre burnout. The scale thickness is ～90?μm for the sample containing 5?vol.% SiC and decreases with increasing SiC content.     

High glass transition temperature polyester coatings for the protection of stones

Copolymers of lactic acid with mandelic or salicylic acid were synthetized through ring‐opening polymerization (ROP) and tested as protective coatings for stones. Most notably, glass transition temperature (T_g), hydrophobicity, and UV barrier properties were increased, making these materials more suitable as protective coating for outdoor stones than poly(lactic acid). A T_g of 76°C was obtained for the alternating copolymer lactic acid/mandelic acid and it was considerably higher than the one of poly(lactic acid) with similar molecular weight (50–55°C). Furthermore, the introduction of a perfluorinated moiety as chain‐end group, using a perfluoro alcohol as initiator of the ROP process, allowed to increase the hydrophobicity and stability of the new coatings. These polymers showed a good protective efficiency when applied on marble stones and preliminary stability tests under solar light showed low degradation, good stability to photo‐oxidative conditions, and negligible color changes after an aging time of 1000 h. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42323.     

Polycarbonate‐based composites reinforced by in situ polytetrafluoroethylene fibrillation: Preparation,thermal and rheological behavior

Fibrillar reinforced composites of polytetrafluoroethylene (PTFE) and polycarbonate (PC) were prepared by in situ fibrillation of PTFE into PC matrix using twin screw extruder. Different samples were obtained by varying the relative ratio between PC and PTFE. The rheological properties of the PC/PTFE composites were found to depend on concentration of the PTFE fibrils. The melt strength analysis in nonisothermal conditions was also studied. The increase in force and decrease in drawability with increasing the PTFE content are associated with the PTFE fibrils formed in situ during the thermomechanical process in twin screw extruder. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42401.     

Preliminary Evidence on the Diagnostic and Molecular Role of Circulating Soluble EGFR in Non-Small Cell Lung Cancer

Assessment of biological diagnostic factors providing clinically-relevant information to guide physician decision-making are still needed for diseases with poor outcomes, such as non-small cell lung cancer (NSCLC). Epidermal growth factor receptor (EGFR) is a promising molecule in the clinical management of NSCLC. While the EGFR transmembrane form has been extensively investigated in large clinical trials, the soluble, circulating EGFR isoform (sEGFR), which may have a potential clinical use, has rarely been considered. This study investigates the use of sEGFR as a potential diagnostic biomarker for NSCLC and also characterizes the biological function of sEGFR to clarify the molecular mechanisms involved in the course of action of this protein. Plasma sEGFR levels from a heterogeneous cohort of 37 non-advanced NSCLC patients and 54 healthy subjects were analyzed by using an enzyme-linked immunosorbent assay. The biological function of sEGFR was analyzed in vitro using NSCLC cell lines, investigating effects on cell proliferation and migration. We found that plasma sEGFR was significantly decreased in the NSCLC patient group as compared to the control group (median value: 48.6 vs. 55.6 ng/mL respectively; p = 0.0002). Moreover, we demonstrated that sEGFR inhibits growth and migration of NSCLC cells in vitro through molecular mechanisms that included perturbation of EGF/EGFR cell signaling and holoreceptor internalization. These data show that sEGFR is a potential circulating biomarker with a physiological protective role, providing a first approach to the functional role of the soluble isoform of EGFR. However, the impact of these data on daily clinical practice needs to be further investigated in larger prospective studies.     

Sintering behavior of Ba/Sr celsian precursor obtained from zeolite‐A by ion‐exchange method

(Ba, Sr)‐exchanged zeolite A with composition Ba_0.74Sr_0.22Na_0.04Al₂Si₂O₈ was prepared by cation exchange; a mild thermal treatment converts into an amorphous phase. Successive crystallization and sintering behavior was studied by XRD, DTA, and thermodilatometric analysis. The results point out the activation of viscous flow sintering mechanisms between 900°C and 1050°C. The densification process starts when the amorphous phase reaches its glass transition temperature (897°C) and finishes when the material crystallizes forming hexacelsian. The application of an external pressure in such temperature range allows to achieve an almost complete densification, the material transforming at 1300°C into dense monoclinic celsian much below the typical processing temperature.     

Design,Synthesis, and Evaluation of WC5 Analogues as Inhibitors of Human Cytomegalovirus Immediate‐Early 2 Protein,a Promising Target for Anti‐HCMV Treatment

Although human cytomegalovirus (HCMV) infection is mostly asymptomatic for immunocompetent individuals, it remains a serious threat for those who are immunocompromised, in whom it is associated with various clinical manifestations. The therapeutic utility of the few available anti‐HCMV drugs is limited by several drawbacks, including cross‐resistance due to their common mechanism of action, i.e., inhibition of viral DNA polymerase. Therefore, compounds that target other essential viral events could overcome this problem. One example of this is the 6‐aminoquinolone WC5 , which acts by directly blocking the transactivation of essential viral Early genes by the Immediate‐Early 2 (IE2) protein. In this study, the quinolone scaffold of the lead compound WC5 was investigated in depth, defining more suitable substituents for each of the scaffold positions explored and identifying novel, potent and nontoxic compounds. Some compounds showed potent anti‐HCMV activity by interfering with IE2‐dependent viral E gene expression. Among them, naphthyridone 1 was also endowed with potent anti‐HIV activity in latently infected cells. Their antiviral profile along with their innovative mechanism of action make these anti‐HCMV quinolones a very promising class of compounds to be exploited for more effective antiviral therapeutic treatment.     

Thermal and mechanical properties of PES/PTFE composites and nanocomposites

Polyethersulphone/polytetrafluoroethylene (PES/PTFE) nanocomposites and composites were prepared by precipitation of PES into a PTFE latex‐containing nanoparticles. Different samples were obtained by varying the relative ratio between PES and PTFE. The complex crystallization process, discussed within the fractionated crystallization frame, allowed to identify and quantify different dispersion degree of the PTFE nanoparticles within the PES matrix. The different samples were thus divided into nanocomposite and composites. The effect of crystalline PTFE domains on the mobility of PES was investigated and discussed. The dynamic‐mechanical behavior was explained in terms of the particle aggregation state. The mechanical properties of the PES/PTFE composites were found to depend on both the dispersion and the concentration of the PTFE nanoparticles. In the glassy state the stiffness of the materials was found to increase with the dispersion degree, resulting higher for the nanocomposite with respect to composites. On the contrary, in the rubbery state the modulus was found proportional to the PTFE nanoparticles concentration, resulting higher in the composites with respect to the nanocomposite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3624–3633, 2013     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

Thyroid Hormones and Antioxidant Systems: Focus on Oxidative Stress in Cardiovascular and Pulmonary Diseases

In previous works we demonstrated an inverse correlation between plasma Coenzyme Q₁₀ (CoQ₁₀) and thyroid hormones; in fact, CoQ₁₀ levels in hyperthyroid patients were found among the lowest detected in human diseases. On the contrary, CoQ₁₀ is elevated in hypothyroid subjects, also in subclinical conditions, suggesting the usefulness of this index in assessing metabolic status in thyroid disorders. A Low-T3 syndrome is a condition observed in several chronic diseases: it is considered an adaptation mechanism, where there is a reduction in pro-hormone T4 conversion. Low T3-Syndrome is not usually considered to be corrected with replacement therapy. We review the role of thyroid hormones in regulation of antioxidant systems, also presenting data on total antioxidant capacity and Coenzyme Q₁₀. Published studies suggest that oxidative stress could be involved in the clinical course of different heart diseases; our data could support the rationale of replacement therapy in low-T3 conditions.