Influence of operation variables on quality parameters of olive husk oil extracted with CO<Subscript>2</Subscript>: Three-step sequential extraction

Supercritical CO₂ extraction is a viable alternative process for the extraction of high-quality oil from olive husk (also known as olive pomace), a residue obtained in the production of olive oil. We analyzed the effect of pressure (100–300 bar), temperature (40–60°C), solvent flow (1–1.5 L/min), and particle size (0.30–0.55 mm) on four important quality parameters of the oil extracted with CO₂: tocopherol concentration, extinction coefficients at 232 and 270 nm, and saponification value. Response surface methodology was used to obtain mathematical expressions related to the operating variables and parameters studied. Results from these experiments were also used to design a three-step sequential CO₂ extraction procedure to obtain a higher-quality extract. The optimal operational sequence consisted of a first extraction step at 75 bar for 1 h using 1% (vol/vol) ethanol modifier, followed by a second extraction stage at 350 bar for 2.5 h without ethanol and a third step, also at 350 bar, for 2.5 h but using ethanol. These extraction conditions obtained an intermediate fraction of oil with 64% yield and all normal parameters according to European Commission food legislation. This fraction is suitable without any further refining. On the contrary, the oils obtained by hexane extraction and by conventional supercritical CO₂ extraction at optimal conditions are suitable for human consumption after further refining. This last finding may result in improved economics of the sequential CO₂ extraction process compared to the conventional extraction method with hexane.     

Mode II Fracture Toughness of a Brittle and a Ductile Adhesive as a Function of the Adhesive Thickness

The main goal of this study was to evaluate the effect of the thickness and type of adhesive on the Mode II toughness of an adhesive joint. Two different adhesives were used, Araldite ® AV138/HV998 which is brittle and Araldite 2015 which is ductile. The end notched flexure (ENF) test was used to determine the Mode II fracture toughness because it is commonly known to be the easiest and widely used to characterize Mode II fracture. The ENF test consists of a three-point bending test on a notched specimen which induces a shear crack propagation through the bondline. The main conclusion is that the energy release rate for AV138 does not vary with the adhesive thickness whereas for Araldite 2015, the fracture toughness in Mode II increases with the adhesive thickness. This can be explained by the adhesive plasticity at the end of the crack tip.     

A Technique for Controllable Vapor-Phase Deposition of l-Nitro[14C]pyrene and Other Polycyclic Aromatic Hydrocarbons onto Environmental Particulate Matter

To produce environmental particles fortified with a polycyclic aromatic hydrocarbon (PAH) for toxicology studies, an experimental apparatus was devised for deposition of the desired chemical species onto particles in a controlled and reproducible manner. The technique utilized consists of dispersion of the particles on a gaseous stream at a controlled rate, thermal vaporization of a solution of PAH, delivery of the vaporized PAH into the aerosol of particles at a controlled rate, subsequent condensation of the PAH onto the particles, and final recovery of the coated particles. The effectiveness of this approach was demonstrated by vapor-coating a ¹⁴C-labeled PAH (l-nitro[¹⁴C]-pyrene) onto diesel engine exhaust particles that had previously been collected by tunnel dilution sampling techniques. Using the ¹⁴C label as a tracer, the coated particles were characterized with respect to degree of coating, integrity of particle structure and absence of chemical decomposition of the coating substrate. This study demonstrates that the described method provides a controllable means for depositing a substance uniformly and with a high coating efficiency onto aerosolized particles. The technique was also used to vapor-coat benzo(a)pyrene onto diesel engine exhaust and urban ambient air particulate matter, and 2-nitrofluoranthene onto urban ambient air particulate matter. Coating efficiencies of about 400 μg/g particulate matter were routinely obtained on a single coating run, and up to 1200 μg/g (1200 ppm) were achieved after a second pass through the process. The coated particles were subsequently utilized in biological fate, distribution and metabolism studies     

Click‐ligation of coumarin to polyether polyols for polyurethane foams

A simple strategy for the synthesis and functionalization of polyurethanes is described. Anionic ring‐opening polymerization was combined with ‘click’ chemistry to synthesize polyols with fluorescent properties. This route allows the incorporation of a wide range of functionalities in the polyols with an easy, clean and highly selective process compatible with several types of functional groups. The proposed strategy opens the way to the production, in a cost‐effective way, of ‘smart’ polyurethanes with non‐conventional properties like fire retardancy, antimite properties, antibacterial properties, etc. Alkynyl groups were introduced into the polyol chains by the controlled addition of glycidyl propargyl ether as co‐monomer during a conventional anionic ring‐opening copolymerization with propylene oxide. Subsequently 4‐azidomethyl‐7‐methoxycoumarin molecules were introduced onto the alkynyl‐polyether polyols by copper‐catalysed cycloaddition reactions to produce end‐functionalized polyols. The chemical structure of the novel polyols was characterized using infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography with triple detection and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopy. These characterization techniques confirmed the presence of a considerable amount of functional groups in the structure of the polyols. Finally, various fluorescent rigid foams, based on the functionalized polyols, were synthesized. Copyright © 2012 Society of Chemical Industry     

Extraction and Characterization of Montmorency Sour Cherry (Prunus cerasus L.) Pit Oil

Montmorency sour cherry (Prunus cerasus L.) pit oil (CPO) was extracted and characterized by various methods including: GC, LC–MS, NMR, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X‐ray powder diffraction (XRD). The oil gave an acid value of 1.45 mg KOH/g, saponification value of 193 mg KOH/g and unsaponifiable matter content of 0.72 %. The oil contained oleic (O) and linoleic (l ) acids as the major components with small concentrations of α‐eleostearic acid (El, 9Z,11E,13E‐octadecatrienoic acid) and saturated fatty acid palmitic (P) acid. The CPO contained six major triacyglycerols (TAG), OOO (16.83 %), OLO (16.64 %), LLO (13.20 %), OLP (7.25 %), OOP (6.49 %) and LElL (6.16 %) plus a number of other minor TAG. The TAG containing at least one saturated fatty acid constitute 33 % of the total. The polymorphic behavior of CPO as studied by DSC and XRD confirmed the presence of α, β′ and β crystal forms. The oxidative induction time of CPO was 30.3 min at 130 °C and the thermal decomposition temperature was 352 °C.     

Modeling bread baking with focus on overall deformation and local porosity evolution

A two dimensional model of bread baking was developed including, for the first time, the dependence of dough viscosity on both temperature and moisture content, the carbon dioxide dissolved from liquid water together with gas generation from yeast at the beginning of baking and the shrinkage due to dough drying. Particular attention was paid to experimental validation of both overall and local variables such as local temperature, overall mass loss, and local moisture content, overall CO₂ released into the oven, and overall deformation and local expansion or shrinkage. Sensitivity studies on generation of carbon dioxide, gravity, and shrinkage are presented to discuss their influences on bread geometry, porosity (reflecting the alveolar structure) and gas pressure. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3847–3863, 2016     

BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

An economic and environment friendly process was adapted to synthesize new dielectric composite materials. Using ethylene vinyl acetate (EVA)/vinyl ester of versatic acid (VeoVa) terpolymer as an aqueous emulsion provides a homogenous dispersion of BaTiO₃ (BT) particles, due to the high viscosity and polarity of the vinyl resin (VR). Composites films were obtained from these dispersions by water evaporation. The evolution of the dielectric properties as a function of the BaTiO₃ content, was correctly fitted by a Maxwell‐Garnett model. This fitting of the experimental curve shows a good dispersion of filler in the vinyl resin and the particles separation by a layer of resin as expected for the preparation method used in this study. The VR/BT composites show good synergy between the dielectric properties of the different phases of the composites due to the formation of macrodipoles and to the strong interactions between polar EVA/VeoVa groups and the BaTiO₃ particles surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44333.     

Conformational Stabilization of Gp41-Mimetic Miniproteins Opens Up New Ways of Inhibiting HIV-1 Fusion

Inhibition of the HIV-1 fusion process constitutes a promising strategy to neutralize the virus at an early stage before it enters the cell. In this process, the envelope glycoprotein (Env) plays a central role by promoting membrane fusion. We previously identified a vulnerability at the flexible C-terminal end of the gp41 C-terminal heptad repeat (CHR) region to inhibition by a single-chain miniprotein (named covNHR-N) that mimics the first half of the gp41 N-terminal heptad repeat (NHR). The miniprotein exhibited low stability, moderate binding to its complementary CHR region, both as an isolated peptide and in native trimeric Envs, and low inhibitory activity against a panel of pseudoviruses. The addition of a disulfide bond stabilizing the miniprotein increased its inhibitory activity, without altering the binding affinity. Here, to further study the effect of conformational stability on binding and inhibitory potency, we additionally stabilized these miniproteins by engineering a second disulfide bond stapling their N-terminal end, The new disulfide-bond strongly stabilizes the protein, increases binding affinity for the CHR target and strongly improves inhibitory activity against several HIV-1 strains. Moreover, high inhibitory activity could be achieved without targeting the preserved hydrophobic pocket motif of gp41. These results may have implications in the discovery of new strategies to inhibit HIV targeting the gp41 CHR region.