A feasibility assessment of the use of nanofluids to enhance the in-vessel retention capability in light-water reactors

Nanofluids, colloidal dispersions of nanoparticles, exhibit a substantially higher critical heat flux (CHF) compared to water. As such, they could be used to enhance the in-vessel retention (IVR) capability in the severe accident management strategy implemented by certain light-water reactors. It is envisioned that, at normal operating conditions, the nanofluid would be stored in dedicated storage tanks, which, upon actuation, would discharge into the reactor cavity through injection lines. The design of the injection system was explored with risk-informed analyses and computational fluid dynamics. It was determined that the system has a reasonably low failure probability, and that, once injected, the nanofluid would be delivered effectively to the reactor vessel surface within seconds. It was also shown analytically that the increase in decay power removal through the vessel using a nanofluid is about 40%, which could be exploited to provide a higher IVR safety margin or, for a given margin, to enable IVR at higher core power. Finally, the colloidal stability of a candidate alumina-based nanofluid in an IVR environment was experimentally investigated, and it was found that this nanofluid would be stable against dilution, exposure to gamma radiation, and mixing with boric acid and lithium hydroxide, but not tri-sodium phosphate.     

Succession of bacterial and fungal communities during natural coffee (Coffea arabica) fermentation

Bacteria, yeasts and filamentous fungi were isolated during natural coffee processing. Bacteria were isolated in greater numbers at the beginning of the fermentation, when the moisture of the coffee beans was around 68%. Gram-positive bacteria represented 85.5% of all bacteria isolated, and Bacillus was the predominant genus (51%). Gram-negative species of the genera Serratia, Enterobacter and Acinetobacter were also found. Approximately 22% of 940 randomly chosen isolates of microorganisms were yeasts. Debaryomyces (27%), Pichia (18.9%) and Candida (8.0%) were the most commonly found genera, and these three genera tended to appear more often as the fruit was fermented and dried. Aspergillus was the most abundant genus besides Penicillium, Fusarium and Cladosporium, with 42.6% of the total fungi isolates. The genera and species identified included members known to have pectinase and cellulase activities. Of the 10 organic acids analyzed and quantified in coffee beans, acetic and lactic acids may have been generated by microbial activity. Butyric acid was not detected in any sample.     

Geometrical study of mixed adhesive joints for high-temperature applications

The use of adhesives for high-performance structural applications has significantly increased in the last decades. However, the use of adhesive joints in adverse environmental conditions is still limited due to the reduced capability of adhesives to withstand large thermal gradients. Dual adhesive joints, which contain two adhesives with remarkably different mechanical behaviours, are a technique suitable for being used in extreme temperatures. The object of this study is a ceramic–metal joint, representative of the thermal protection systems of some aerospace vehicles. In this paper, several joint-mixed joint geometries are presented, studied with recourse to finite element analysis. In a first phase, the three-dimensional finite element models and the material properties are validated against experimental data. In a second phase, the model geometry is modified, with the aim of understanding the effect of several changes in the joints’ mechanical behaviour and comparing the merits of each geometry. The models’ presented good agreement was found between experimental and numerical data and the alternative geometries allowed the introduction of additional flexibility on the joint but at the cost of lower failure load.     

Seeing is believing? When scanning electron microscopy (SEM) meets clinical dentistry: The replica technique.

In restorative dentistry, the in situ replication of intra‐oral situations, is based on a non‐invasive and non‐destructive scanning electron microscopy (SEM) evaluation method. The technique is suitable for investigation restorative materials and dental hard‐ and soft‐tissues, and its interfaces. Surface characteristics, integrity of interfaces (margins), or fracture analysis (chipping, cracks, etc.) with reliable resolution and under high magnification (from ×50 to ×5,000). Overall the current study aims to share detailed and reproducible information about the replica technique. Specific goals are: (a) to describe detailed each step involved in producing a replica of an intra‐oral situation, (b) to validate an integrated workflow based on a rational sequence from visual examination, to macrophotography and SEM analysis using the replica technique; (c) to present three clinical cases documented using the technique. A compilation of three clinical situations/cases were analyzed here by means the replica technique showing a wide range of possibilities that can be reached and explored with the described technique. This guidance document will contribute to a more accurate use of the replica technique and help researchers and clinicians to understand and identify issues related to restorative procedures under high magnification.     

Leaf and stem micromorphology of Byrsonima sericea DC. by light and scanning electron microscopy

Micromorphological studies were carried out using multiple microscopic techniques on the leaves and stem bark of Byrsonima sericea DC. (Malpighiaceae), a species popularly known as “murici” and used medicinally, in order to identify both qualitative and quantitative features of leaf and stem anatomy and histochemistry as differential parameters to support both the quality control of its ethnodrugs and the taxonomy of the genus. The study was conducted using traditional techniques of plant anatomy, histochemical tests, and the stomatal index (SI). Byrsonima sericea has hypostomatic leaves, anomocytic stomata, and its epidermal walls are anticlinal and straight on the adaxial and curved on the abaxial faces. T‐shaped trichomes were observed mainly on the abaxial surface. The leaf epidermis showed waxes syntopism on both surfaces, with the occurrence of different crystalloid forms on a single phylloplane. The mesophyll is dorsiventral, with 3‐4 collateral vascular bundles. Phenolic compounds, starch, and proteins were identified in the petiole and stem. The SI was 14.5 ± 0.53% (p < .05), but did not showed significant variations. A set of characters were found to be distinctive for the studied species, however, constituting parameters that could be used to separate B. sericea from other species of the genus.     

Fibre-reinforced cemented soils compressive and tensile strength assessment as a function of filament length

This study aims to develop a dosage methodology based on tensile and compressive strength for artificially cemented fibre reinforced soils considering filament length. The controlling parameters evaluated were the fibre length (l), the cement content (C), the porosity (η) and the porosity/cement ratio (η/C_iv). A number of unconfined compression and split tensile tests were carried out in the present work. The results show that fibre insertion in the cemented soil, for the whole range of cement content studied, and the increase of reinforcement length improve unconfined compressive and split tensile strengths. It was shown that the porosity/cement ratio, in which volumetric cementitious material content is adjusted by an exponent (0.28 for all the fibre-reinforced and non-reinforced cemented soil mixtures) to end in unique correlations for each mixture, is a good parameter in the evaluation of the unconfined compressive and split tensile strength of the fibre-reinforced and non-reinforced cemented soil studied. Analysis of variance (ANOVA) performed on the results of a factorial experiment considering the effect of adjusted cement content, fibre length and porosity showed that all of these factors are significant in affecting the measured changes in split tensile and unconfined compressive strength values. Finally, unique dosage relationships could be achieved linking the unconfined compressive strength (q_u) and the split tensile strength (q_t) of the sandy soil studied with porosity/cement ratio (η/C_iv) and fibre length (l).     

Effect of polythene film activated with enterocin EJ97 in combination with EDTA against Bacillus coagulans

Polythene films coated with the enterococcal bacteriocin enterocin EJ97 alone or in combination with EDTA were tested against Bacillus coagulans CECT 12. Bacteriocin activity was clearly enhanced by EDTA, as shown by viable staining and epifluorescence microscopy observation of treated cells. Activated films were tested in liquids from canned corn and canned peas inoculated with B. coagulans cell suspensions and stored at 4 °C and 20 °C for 24 h. The bacteriocin alone showed highest activity in samples stored at 4 °C, while the maximum performance of EDTA was observed at 20 °C. Films activated with a combination of both antimicrobials showed highest bactericidal activity at 4 °C. In liquid from canned corn and peas stored at 4 °C, the combined treatment reduced the concentrations of viable cells progressively over incubation time. Viable staining revealed an increase in the percentage of dead cells at 20 °C, avoiding proliferation of the bacilli. The bactericidal effect of the combined antimicrobial agents was higher in the liquid of canned peas than that of canned corn. The combined use of viable staining and classical viable cell counts allowed a better estimation of cell damage caused by the antimicrobial treatments.     

DETERMINATION OF ALUMINUM,CALCIUM, AND MAGNESIUM IN FRASER FIR (ABIES FOLIAGE) FOLIAGE AND SURROUNDING SOIL IN THE SOUTHERN APPALACHIANS

Located at high elevation sites in the Southern Appalachians, the Fraser fir (Abies fraseri) has suffered visible decline in recent years. This study involved the measurement of concentration levels of aluminum, calcium, and magnesium by inductively coupled plasma optical emission spectrometry to determine the contribution of acidic deposition to this decline. Calcium and magnesium are nutrients, and hence one would anticipate relatively high foliar concentrations of these elements in the absence of pollution. Conversely, aluminum is toxic to the trees, and one would expect higher foliar concentrations in polluted locations. Statistical comparisons of the metal concentrations did not demonstrate a causal relationship between the location or elevation of Fraser fir stands. However, compared to previous studies, the foliar concentrations of calcium and magnesium were higher than concentrations previously reported in the 1990s, suggesting pollution controls may have reduced atmospheric deposition.