Capillary rise properties of porous mullite ceramics prepared by an extrusion method with various diameters of fiber pore formers

Porous mullite ceramics with unidirectionally oriented pores were prepared by an extrusion method using rayon fibers as the pore formers. Rayon fibers of 8.1, 9.6, 16.8, and 37.6 μm in diameter were used as the pore formers and were kneaded with alumina powder, kaolin clay, China earthen clay, and water to form pastes. These pastes were extruded into cylindrical tubes, dried, and fired at 1500 °C for 4 h. The apparent porosities ranged from 45.7 to 48.2 %. The pore size distributions showed a sharp peak at 9.4, 10.0, 15.6, and 30 μm with increasing fiber diameters. The height of the capillary rise was 1780, 1670, 1320, and 950 mm with increasing fiber diameter. The maximum capillary rise is much higher than previously reported. The contact angle and effective pore radius that determine the capillary rise ability were calculated by fitting the capillary rise curves using the Fries and Dreyer’s equation.     

Computing Longest Previous Factor in linear time and applications

We give two optimal linear-time algorithms for computing the Longest Previous Factor (LPF) array corresponding to a string w. For any position i in w, LPF[i] gives the length of the longest factor of w starting at position i that occurs previously in w. Several properties and applications of LPF are investigated. They include computing the Lempel-Ziv factorization of a string and detecting all repetitions (runs) in a string in linear time independently of the integer alphabet size.     

Analysis of methanol–ethanol mixtures from falsified beverages using a dual biosensors amperometric system based on alcohol dehydrogenase and alcohol oxidase

A portable bienzymatic analytical system was developed for the chronoamperometric analysis of methanol–ethanol mixtures. The system consists of two biosensors, one based on alcohol dehydrogenase (ADH) that responds only to the ethanol and the second one based on alcohol oxidase (AOX) that responds to both methanol and ethanol. The transducers were screen-printed electrodes (SPEs) modified with mediators: Meldola blue for ADH and Co-phthalocyanine for AOX. The calibration graph of the ADH biosensor is linear between 0.3 and 8 mmol/L ethanol. The AOX biosensor is able to quantify both analytes in mixtures that contain methanol between 3 and 70 mmol/L and ethanol ranging from 15 to 110 mmol/L. Interferences due to non-specific oxidations from common oxidizable compounds like gallic acid and ascorbic acid were smaller in the case of transducer based on Meldola blue. The analytical system was successfully tested on real samples: non-alcoholised beer (NAB) spiked with ethanol or methanol and a falsified rose wine (FRW).     

Bioactive polymers LVII. A novel drug delivery system based on 5-nitro-2-furaldehyde-semicarbazone and poly(acrylic acid-co-vinyl alcohol)

The coupling of 5-nitro-2-furaldehyde-semicarbazone on to poly(acrylic acid-co-vinyl alcohol) copolymer by the use of dicyclohexylcarbodiimide as activator has been studied. On the basis of an experimental design, the influence of different parameters is studied (activator/support, drug/support, reaction time, solvent volume) in order to determine the optimum conditions for obtaining the maximum amount of the coupled drug on the support.     

Improved Accuracy Pseudo-Exponential Function Generator With Applications in Analog Signal Processing

A new CMOS current-mode pseudo-exponential circuit based on the n-order Taylor series expansion will be presented. The most important advantage of the circuit with respect to the previously reported similar ones is the smaller value of the total computing error (under 0.3 dB), for a maximal output range of the proposed function generator greater than 40 dB. The total error could be very easily reduced by increasing the number of terms considered in the Taylor expansion. The circuit also presents the advantage of the independence of the output current on technological parameters. The frequency response is improved due to the strong inversion operation of all MOS transistors and to the current-mode operation of the circuit. The circuit area is relatively small due to the exclusively utilization of MOS transistors. The SPICE simulations confirm the theoretical estimated results. The proposed exponential function generator is designed in 0.12-mum CMOS technology and it consumes a reasonable power (less than 0.3 mW) for obtaining the previous mentioned computing error and has a low-voltage operation (a minimal accepted supply voltage under 1.2 V). The total silicon occupied area of the exponential function generator with third-order approximation is about 5.9 mum times 7.9 mum.     

Impact of Some Properties of Quaternized Polysulfone/Poly(Vinylidene Fluoride) Blend on the Potential Biomedical Applications

Blends of quaternized polysulfones with triphenylphosphonium pendant groups/poly(vinylidene fluoride) were analyzed to establish their impact on the rheological, morphological and surface properties, as well as their interactions with some blood compounds. The rheological functions reflect the influence of both polymers’ chemical structures. Blend compositions of the corresponding films influence the surface tension parameters, increase blend hydrophobicity and, implicitly, decrease the polar surface tension parameters. The specific surface characteristics of polymer blends are related to their interactions with some blood constituents and plasma proteins. Also, the specific microarchitecture of the blend represents an excellent scaffold for medical applications.     

Increase of regression speed of combustion through oxidizer doping

This paper presents an innovative method to increase the regression speed of a solid fuel grain by using oxidizer doping. The results obtained on a propulsion application showing the performance parameters as an output of a numerical model are provided. Two models are given that predict the regression speed increase for embedding wires and for oxidizer doping with a factor of ～2 to 3. Also, it is shown that this increase of the regression speed by using a low oxidizer doping percentage, which is based on the assumption that at a higher doping rate the combustion instabilities, can lead to detonations. Next, a thermochemical model for the combustion within the oxidizer doping model is afforded. For this model, the burn is assumed to take place around the surface of each of the oxidizer particles, being composed of two different burning processes: one is the burning on the surface of the solid fuel grain and the other is the burning between the solid fuel and the solid oxidizer. For a non-doped fuel grain, the burning takes place only on the surface of the fuel grain. Finally, a potential application of such propulsion units to small satellite launchers is presented, and a case study of such a vehicle intended to place a 50 kg payload on a low earth orbit (300 to 500 km altitude) is described. The modelling proposed is based on the assumption that the use of solid methane makes this launcher environmentally friendly.     

Microstructure,mechanical properties,and corrosion resistance of Ti-20Zr alloy in undoped and NaF doped artificial saliva

The corrosion behavior of a new, advanced Ti-20Zr alloy with α+β microstructure (determined by optical microscopy, XRD, and SEM) and very good mechanical properties (obtained from the stress-strain curve) is studied in this paper. The composition of the alloy native passive film was determined from a XPS analysis and the long-term corrosion resistance in undoped and doped states with 0.05M NaF artificial Carter-Brugirard saliva of different pH values, simulating the severe functional conditions of a dental implant, was analyzed by electrochemical methods. This alloy possesses an advantageous balance between good mechanical resistance and plasticity and Young’s modulus and exhibits more favorable electrochemical parameters and corrosion resistance than CP Ti due to its more resistant passive layer containing Ti₂O₃, TiO₂, and ZrO₂ protective oxides. After 1000 h of immersion in saliva, the protective properties of the alloy were enhanced due to the deposited surface layer that incorporated protective phosphates (shown by SEM and XPS).     

Better Safe than Sorry: A Study of Investigating Individuals’ Protection of Privacy in the Use of Storage as a Cloud Computing Service

Since the use of network-based storage as a cloud computing service [Storage as a Service (StaaS)] becomes ubiquitous, users who store data in the cloud are exposed to risk and potentially severe consequences. Therefore, individuals should carefully consider security and privacy issues when using StaaS. Drawing upon the principle of self-preservation and the theory of protection motivation, this study develops a research model explaining the mechanisms leading to the development of a protection strategy for individuals’ safe use of StaaS and empirically tests the proposed model. The results show that the natural propensity to trust, an individual trait, influences an individual’s need for privacy. This, in turn, along with perception of privacy risk, significantly affects individuals’ perception of the need to protect themselves. Three coping appraisal factors, preventive measures, self-efficacy, and willingness to incur cost of prevention, together with the individual perceived need to protect self, directly and positively affect users’ need to develop a protection strategy in a cloud computing environment. Theoretical and practical implications are discussed.     

Plasma parameters of argon and argon/molecular gas mixture plasmas produced in microwave discharge

The experimental results and their analysis are presented concerning electron density and temperature of the microwave discharge plasma (power range 100–500 W) produced in Ar gas and Ar–N₂ and Ar–N₂–NO gas mixture at the total pressure of 0.5 Torr. The triple probe method was primarily used in order to set-up a direct and on-time technique to measure electron temperature in complex plasma. The results were compared with those obtained using a cylindrical probe mounted in a circuit with reference electrode. Each probe was made of tungsten wires of 0.5 mm diameter and 3 mm in length each. When plasma contains only one maxwellian group of electrons, within the experimental errors, both the probes systems get comparable value of plasma parameters. When the characteristic of cylindrical probe shows two groups of thermal electrons within the microwave plasma the triple probe may show always results concerning one group but of which temperature depends on the ratio of the densities of those two groups of electrons.