On the limiting factors of the critical current density in high-Tc superconducting ceramics

The temperature dependence of the critical current density at high temperatures and in weak applied magnetic field for YBa₂Cu₃O_7–y ceramic samples with a pronounced granular character is analyzed. The experimental results can be explained in terms of thermally activated motion of the intergrain Josephson vortices at grain boundaries, which may be an indication that the actual limiting factor for the critical current density in ceramic samples results from a weak pinning force density for the intergrain vortices rather than from the weak-link quenching.     

Upper eyelid orbicularis oculi flap with tarsoconjunctival island for reconstruction of full-thickness lower lid defects

BACKGROUND: Various cryopreservation techniques have been investigated to elongate preservation time, however, most have failed to be clinically induced because of damage due to ice crystal formation. Subzero nonfreezing conditions could theoretically reduce organ metabolism without damage due to ice crystal formation. We evaluated the superiority of subzero nonfreezing storage compared with conventional hypothermic storage using isolated rat hepatocytes stored in University of Wisconsin (UW) solution without cryoprotectants. METHODS: Hepatocytes of Wistar rats isolated by collagenase digestion were suspended in UW solution and divided into the following three groups: subzero nonfreezing group (-4 degrees C), zero nonfreezing group (0 degrees C), and control group (4 degrees C). They were stored for 48 hr at the temperatures indicated. After 24 and 48 hr of storage, we carried out a trypan blue exclusion test and a 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay, and measured lactate dehydrogenase release, lactic acid, ATP content, and the ability of hepatocytes to synthesize urea. After 48 hr of storage, morphological differences between the control group and the subzero nonfreezing group were investigated by scanning and transmission electron microscopy. RESULTS: Significant improvements of the trypan blue exclusion test and ATP contents in the subzero nonfreezing group were observed. Lactic acid production was also significantly suppressed in the subzero nonfreezing group compared with that in the control group. The MTT assay value was significantly better at -4 degrees C than at 4 degrees C. The rate of urea synthesis at -4 degrees C was higher than that at 4 degrees C. Electron microscopy revealed that subzero nonfreezing delayed the lethal bleb-forming process of stored hepatocytes, which was followed by mitochondrial swelling, compared with the control group. CONCLUSIONS: Subzero nonfreezing storage (-4 degrees C) in UW solution could provide better preservability for isolated rat hepatocytes with protection against hypoxic cell injury compared with conventional hypothermic storage (4 degrees C).     

Lanthanum cobaltite nanoparticles using the polymeric precursor method

The present study reports the evolution of reactive lanthanum cobaltite nanoparticles obtained by a polymeric precursor route, using citric acid as chelating agent. The crystallization from amorphous precursor, particle growth and the formation of nanoparticle agglomerates at different calcination temperatures was carried out by conventional and high-resolution electron microscopy, electron diffraction and energy-dispersive X-ray analysis and Raman spectroscopy. Microstructure measurements were compared with X-ray diffraction and chemical analysis results. Electron diffraction, combined with TEM, was used to determine the proportion of amorphous phase. The presence of amorphous carbon during the decomposition of the amorphous precursor was analyzed by Raman spectroscopy. The coherent crystalline domain size and the particle size have been monitored by XRD and electron microscopy in order to determine the evolution of both crystal size and the temperature onset for the formation of polycrystalline aggregates.The results demonstrate that at 550 °C we obtain pure single-phase equiaxed nanopowders of LaCoO₃ with crystal size of 20 nm, free of amorphous carbon and without the presence of polycrystalline aggregates.     

Synthesis and optical properties of water-soluble poly(vinylpyrrolidone) - modified fullerene C<Subscript>60</Subscript>

Summary  The effect of fullerene on the radical polymerization of N-vinylpyrrolidone with lauroyl peroxide in toluene was investigated kinetically. C₆₀ was found to act both as inhibitor and as retarder because the polymerization rate and the molecular weight of resulting poly(vinylpyrrolidone) is decreasing with the increase of the fullerene concentration (0-6.94 x 10^-4 mol l^-1). The water-soluble poly(vinylpyrrolidone)-modified fullerene C₆₀ compound was characterized by differential scanning calorimetric, Infrared and Raman spectroscopy, UV absorption and photoluminescence. Based on the results obtained by optical measurements, it is argued that by the covalent attachment of the polymeric radicals to fullerene cage the extended electronic conjugation system of the C₆₀ is broken leading to the appearance of a polyene structure.     

The influence of neutron irradiation on (B0.65C0.35)Ba1.4Sr0.6Ca2Cu3Oz superconducting phase: The role of the grain edge

Using the transport and magnetization measurements, the influence of neutron irradiation at a fluence of 5 × 10¹⁷ n cm⁻² on (B_0.65C_0.35)Ba_1.4Sr_0.6Ca₂Cu₃O _z has been investigated. The neutron irradiation was found to decrease critical temperature and transport critical current density, increase the residual and normal state resistivity, and improve the intragranular critical current density with 1.6 × 10⁵ A/cm² (at 77.3 K and in the applied field up to 160 kA m) and ΔM _irr/ΔM _nonirr ratio (up to factor of 3) at highest field used for investigation. The field dependence of this ratio, which is below the unity at very low field but higher than 1 at high fields, correlated with the shape of the hysteretic loops as well as with the change of the transport parameters after irradiation suggests the role of the irradiation-induced effects on the grain edges. We discuss these effects in the framework of the Bean-Livingstone surface barriers and geometrical barriers.     

In vitro assessment and monitoring of the implant titanium materials – physiological environment interactions

Long‐term monitoring (for 8000 exposure hours) of titanium and its implant alloys (Ti‐5Al‐4V, Ti‐6Al‐4Fe) interactions with Ringer's solutions of different pH‐values (2.5, 4.35, 6.98), simulating various conditions that can appear at the contact between implant and tissues was carried out in this paper. All data were statistics treated using Medcalc program. In vitro electrochemical behaviour of titanium and its alloys reveals their self‐passivation in Ringer's solutions. Monitoring of the open circuit potentials with time and pH have shown that the passive films on the implant materials studied were very stable for all tested periods. Interactions due to the non‐uniformity of the physiological electrolyte pH can not produce any form of local corrosion. The tested materials present low corrosion rates which attest their very good stability for 8000 exposure hours in simulated biological environment. Surface topography characterisation using atomic force microscopy (AFM) data, correlated with the electrochemical parameters, were arguments for the stability of the samples in studied bioliquids.     

Photoluminescent Polymer Aerogels with R,G and B Emission

In this work, three new polymer aerogels based on 2-hydroxy ethyl methacrylate (HEMA) complexes with Eu(III), Tb(III) and La(III) are prepared and investigated. The polymer aerogels present strong photoluminescence with emissions located in the red, green and blue regions of the visible spectrum. Depending on the water content used during the preparation path, the consistency of the photoluminescent aerogels varies from rigid, regularly shaped monoliths to a flexible, fibrous material with very low density. The morpho-structural investigation was performed by FT-IR, XPS and SEM. Thermal behavior was also evaluated, while steady-state fluorescence spectroscopy, absolute PLQY and lifetime were used for the investigation of their luminescent properties. The impressive photoluminescent emission located in the red, green and blue areas of the visible spectrum is preserved irrespective of the selected porosity. Their photo-emissive properties, tunable porosity and the convenience of the preparation path could be some arguments for applications as photonic conversion mediums in special-purpose optoelectronic devices or sensors.     

Electronic Synapses Enabled by an Epitaxial SrTiO3-δ / Hf0.5Zr0.5O2 Ferroelectric Field-Effect Memristor Integrated on Silicon

Synapses play a vital role in information processing, learning, and memory formation in the brain. By emulating the behavior of biological synapses, electronic synaptic devices hold the promise of enabling high-performance, energy-efficient, and scalable neuromorphic computing. Ferroelectric memristive devices integrate the characteristics of both ferroelectric and memristive materials and present a far-reaching potential as artificial synapses. Here, it is reported on a new ferroelectric device on silicon, a field-effect memristor, consisting of an epitaxial ultrathin ferroelectric Hf_0.5Zr_0.5O₂ film sandwiched between an epitaxial highly doped oxide semiconductor SrTiO_3-δ and a top metal. Upon a low voltage of less than 2 V, the field-effect modulation in the semiconductor enables to access multiple states. The device works in a large time domain ranging from milliseconds down to tens of nanoseconds. By gradually switching the polarization by identical pulses, the ferroelectric diode devices can dynamically adjust the synaptic strength to mimic short- and long-term memory plasticity. Ionic contributions due to redox processes in the oxide semiconductor beneficially influence the device operation and retention.     

Circulating Small EVs miRNAs as Predictors of Pathological Response to Neo-Adjuvant Therapy in Breast Cancer Patients

Neo-adjuvant therapy (NAT) is increasingly used in the clinic for the treatment of breast cancer (BC). Pathological response to NAT has been associated with improved patients’ survival; however, the current techniques employed for assessing the tumor response have significant limitations. Small EVs (sEVs)-encapsulated miRNAs have emerged as promising new biomarkers for diagnosis and prediction. Therefore, our study aims to explore the predictive value of these miRNAs for the pathological response to NAT in BC. By employing bioinformatic tools, we selected a set of miRNAs and evaluated their expression in plasma sEVs and BC biopsies. Twelve miRNAs were identified in sEVs, of which, miR-21-5p, 221-3p, 146a-5p and 26a-5p were significantly associated with the Miller–Payne (MP) pathological response to NAT. Moreover, miR-21-5p, 146a-5p, 26a-5p and miR-24-3p were independent as predictors of MP response to NAT. However, the expression of these miRNAs showed no correlation between sEVs and tissue samples, indicating that the mechanisms of miRNA sorting into sEVs still needs to be elucidated. Functional analysis of miRNA target genes and drug interactions revealed that candidate miRNAs and their targets, can be regulated by different NAT regimens. This evidence supports their role in governing the patients’ therapy response and highlights their potential use as prediction biomarkers.