Evidence of Oxygen Ferromagnetism in ZnO Based Materials

Discoveries of room‐temperature ferromagnetism (RTFM) in semiconductors hold great promise in future spintronics technologies. Unfortunately, this ferromagnetism remains poorly understood and the debate concerning the nature, carrier‐mediated versus defect‐mediated, of this ferromagnetism in semiconducting oxides is still open. Here, by using X‐ray absorption (XAS) and X‐ray magnetic circular dichroism (XMCD), it is demonstrated that the oxygen ions have a ferromagnetic response in different ZnO‐based compounds showing RTFM behavior: ZnO nanoparticles capped with organic molecules and ZnO/ZnS heterostructures. These results demonstrate the intrinsic occurrence of RTFM in these systems, and point out that it is not related to the metallic cation but it relays on the conduction band of the semiconductor.     

Permittivity and Conductivity Measurements of Building Materials at 5.8 GHz and 41.5 GHz

The results of various experiments performed to characterize electromagnetic properties of typical building materials at BRAN (Broadband Radio Access Networks) and MVDS (Multipoint Video Distribution System) bands are presented and compared. Transmission and reflection coefficients were measured as functions of the angle of incidence, using a wideband sounder based on the swept frequency technique. A high precision angular positioning system was built and used in co-ordination with the measurement equipment.The dielectric constants (_r) were estimated by comparing values predicted with a multiple successive internal reflection model and measured transmission and reflection coefficients. It has been found that the variation of the dielectric constant value with the frequency does not necessarily follow the same trend for different materials. For example, the measured _r for plasterboard presents an increment withfrequency (2.02 at 5.8 GHz, 2.5 at 41.5 GHz – measured by theauthors –, 2.58 at 59.5 GHz, and 2.81 at 60.2 GHz – given byliterature –), while the values for glass follow a wanderingpattern (6.06 at 5.8 GHz, 5–10 at 10 GHz, 3.41 at 41.5 GHz, 7.51at 57.6 GHz, and 5.29 at 60.2 GHz). Moreover, the measured_r for a brick wall at 5.8 GHz (3.58) shows differenceswith values reported at 2 GHz (4.44).     

增加折叠电流保护的电路

对许多需要数安培供电电流的应用而言，三端输出可调线性稳压器有易用．低成本和完全片上过载保护等特点，如美国国家半导体公司的LM317。增加数个元器件可以使三端稳压器具备一种高速度的短路限流能力，从而提高可靠性。限流器可将最大输出电流限制在一个安全的恒定水平IMAX上，避免稳压器的损坏。当出现一个故障状况时，传输晶体管上的功耗近似于VIN×IMAX。要让设计的稳压器能承受过载，就需要谨慎地选择元器件的额定值（经常是留了过大的余地），除非可以在故障发生时降低或折叠（foldback）输出电流。     

Modeling microwave power structures based on k-furcated waveguides arbitrarily filled with materials by modal techniques.

Waveguide structures are very popular in the microwave power industry due to their power handling capabilities. Modal expansion of the waveguide fields and application of the circuit theory allow for the division of a complex device into several simpler sections which can be analyzed separately with the best suited method. The modal techniques can be divided into two groups--those which analyze junctions or discontinuities and those which examine propagation characteristics. In this paper, a review of modal techniques for high power applications is given. Modal expansion of the fields in the waveguides is then performed and applied to modeling of k-furcated waveguides. The modal analysis based on the Coupled Mode Method is described for the waveguides partially filled with isotropic materials. A hybrid modal analysis coupled with Finite Element Method suitable for more complex waveguide structures is also described. Computational results obtained for some real-life microwave devices are presented. Excellent agreement was found when comparing the results with those generated with a commercial FDTD simulator demonstrates the validity and reliability of the proposed method.     

An efficiently implementable maximum likelihood decoding algorithm for tailbiting codes

Convolutional tailbiting codes are widely used in mobile systems to perform error-correcting strategies of data and control information. Unlike zero tail codes, tailbiting codes do not reset the encoder memory at the end of each data block, improving the code efficiency for short block lengths. The objective of this work is to propose a low-complexity maximum likelihood decoding algorithm for convolutional tailbiting codes based on the Viterbi algorithm. The performance of the proposed solution is compared to that of another maximum likelihood decoding strategy which is based on the A* algorithm. The computational load and the memory requirements of both algorithms are also analysed in order to perform a fair comparison between them. Numerical results considering realistic transmission conditions show the lower memory requirements of the proposed solution, which makes its implementation more suitable for devices with limited resources.     

Proportional Plus Integral Control for Set-Point Regulation of a Class of Nonlinear RLC Circuits

In this paper we identify graph-theoretic conditions which allow us to write a nonlinear RLC circuit as port-Hamiltonian with constant input matrices. We show that under additional monotonicity conditions on the network’s components, the circuit enjoys the property of relative passivity, an extended notion of classical passivity. The property of relative passivity is then used to build simple, yet robust and globally stable, proportional plus integral controllers. This work was partially supported by CONACyT, México.     

WCDMA Uplink Capacity of Highways Cigar-Shaped Microcells with Incorporated HSUPA Service

The multi-service (voice, data and HSUPA) uplink capacity and the interference statistics of the sectors of the cigar-shaped WCDMA microcell are studied using a model of 5 highway microcells. The two-slope propagation loss model with lognormal shadowing is used in the analysis. It is concluded that the voice and data service are significantly affected by HSUPA users and sector capacity decreases dramatically when one of these users gets connected to a given sector or to one next to it. Also it has been concluded that the capacity decrement is highly sensitive to the location of the HSUPA users. Thus, no more than one HSUPA with a process gain of 16 can be connected to a given base station. In this case, the HSUPA user should interrupt its transmission when it is near to the sector border. No more than one HSUPA user with a process gain of 8 is permitted in a given sector and the sector next to it. When the HSUPA user is at the sector border, its transmission should be disabled.     

Analysis of Frequency Selective Surfaces at Millimeter Wave Band Using the Hertz Vector Potential Method

In this work, the Hertz vector potential method was used to obtain the dyadic Green’s function components for frequency selective surfaces (FSS) on an anisotropic layer. The considered structures are composed by periodic arrays of conducting crossed dipole and rectangular patch elements. Results of reflected power were obtained by using the moment method. Curves for the reflected power versus frequency are presented as function of the structural parameters, assuming x, y, and z orientation for the optical axis in the anisotropic substrate.     

The importance of access to information and knowledge coordination on quality and economic benefits obtained from Six Sigma

Wireless Networks - This paper presents a structural equation model that relates knowledge coordination with access to information in the process of implementing Six Sigma and their impact on the...     

Structural Changes in the BODIPY Dye PM567 Enhancing the Laser Action in Liquid and Solid Media

In the search for more efficient and photostable solid‐state dye lasers, newly synthesized analogs of the borondipyrromethene (BODIPY) dye PM567, bearing the polymerizable methacryloyloxypropyl group at position 2 (PMoMA) or at positions 2 and 6 (PDiMA), have been studied in the form of solid copolymers with methyl methacrylate (MMA). The parent dye PM567, as well as the model analogs bearing the acetoxypropyl group in the same positions, PMoAc and PDiAc, respectively, have been also studied both in liquid solvents and in solid poly(MMA) (PMMA) solution. Although in liquid solution PMoAc and PDiAc have the same photophysical properties as PM567, PDiAc exhibited a photostability up to 10 times higher than that of PM567 in ethanol under 310 nm‐irradiation. The possible stabilization factors of PDiAc have been analyzed and discussed on the basis of the redox potentials, the ability for singlet molecular oxygen [O₂(¹Δ_g)] generation, the reactivity with O₂(¹Δ_g), and quantum mechanical calculations. Both PMoAc and PDiAc, pumped transversally at 532 nm, lased in liquid solution with a high (up to 58 %), near solvent‐independent efficiency. This enhanced photostabilization has been also observed in solid polymeric and copolymeric media. While the solid solution of the model dye PDiAc in PMMA showed a lasing efficiency of 33 %, with a decrease in the laser output of ca. 50 % after 60 000 pump pulses (10 Hz repetition rate) in the same position of the sample, the solid copolymer with the double bonded chromophore, COP(PDiMA‐MMA), showed lasing efficiencies of up to 37 %, and no sign of degradation in the laser output after 100 000 similar pump pulses. Even under the more demanding repetition rate of 30 Hz, the laser emission from this material remained at 67 % of its initial laser output after 400 000 pump pulses, which is the highest laser photostability achieved to date for solid‐state lasers based on organic polymeric materials doped with laser dyes. This result indicates that the double covalent linkage of the BODIPY chromophore to a PMMA polymeric matrix is even more efficient than the simple linkage, for its photostabilization under laser operation.