Comparison of seven methods for stored cereal losses to insects for their application in rural conditions

There are several methods for assessing harvest losses during storage with varying degrees of accuracy, reliability and practical application, however, field conditions may limit their use among subsistence farmers and traders in developing nations. We compared seven standard grain loss methods during natural and controlled infestation by Sitophilus oryzae L. in wheat and barley to select the best procedures for use in farm storage. Methods tested were: 1) visual inspection of infested lots, 2) uncorrected weight loss, 3) modified standard volume/weight ratio, 4) grain count and weight, 5) percentage of damaged grains converted to weight loss, 6) one thousand grain mass, and 7) one thousand grain mass including dust. Previously disinfested cereal lots (wheat, barley, 500 g fresh w) were exposed to 20 newly emerged adult S. oryzae for 90 d at 28 °C and 70% r.h. Naturally- infested wheat lots were also monitored under the same conditions. Before and after this period, fresh and dry weight, number, moisture content of uninfested and damaged grains, weight of 1 L of seeds and dust produced by insect activity, fresh and dry weight of 1000 kernels, and number of adult weevils was determined and applied to appropriate equations of methods (1), (2), (3), (4), (5), (6) and (7). Grain mass loss estimations varied by wide margins (9.3 ± 1.3% to 25.8 ± 2.3% in barley, 2.2 ± 0.7% to 12.5 ± 2.5% in wheat) depending on method employed, suggesting the need for careful selection of the most appropriate procedure under field conditions and farmer/trader interests. While accurate procedures such as method 7 provided dependable results, methods 3 and 5 appear most practical for wheat and barley.     

Effects of α s1-casein (CSN1S1) and κ-casein (CSN3) genotypes on milk coagulation properties in Murciano-Granadina goats

The effects of the caprine α s1-casein (CSN1S1) polymorphisms on milk quality and cheese yield have been widely studied in French and Italian goat breeds. Much less is known about the consequences of κ-casein (CSN3) genotype on the technological and coagulation properties of goat milk. In the current study, we have performed an association analysis between polymorphisms at the goat CSN1S1 and CSN3 genes and milk coagulation (rennet coagulation time, curdling rate and curd firmness) and technological (time to cutting of curd and cheese yield) properties. In this analysis, we have included 193 records from 74 Murciano-Granadina goats (with genotypes constituted by different combinations of alleles B, E and F of the gene CSN1S1 and alleles A and B of the gene CSN3) distributed in three herds, which were collected bimonthly during a whole lactation. Data analysis, using a linear mixed model for repeated observations, revealed significant associations between CSN1S1 genotypes and the rate of the curdling process. In this way, milk from EE goats had a significantly higher curdling rate than milk from BB individuals (P<0?·05). Contrary to previous experiments performed in French breeds, cheese yield was not significantly different in BB, EE and EF goats. Moreover, we have shown that CSN3 genotype has a significant effect on the rennet coagulation time (BB>AB, P<0?·05) but not on cheese yield. No interaction between the CSN1S1 and CSN3 genotypes was observed.     

Enzymatic production of human milk fat substitutes containing palmitic and docosahexaenoic acids at sn-2 position and oleic acid at sn-1,3 positions

This paper studies the synthesis of structured triacylglycerols (STAGs) rich in palmitic and docosahexaenoic acids (PA and DHA) at sn-2 position and oleic acid (OA) at sn-1,3 positions by a four step process. First, triacylglycerols (TAGs) were obtained with 63–66 mol PA/100 mol total fatty acids and 10 mol DHA/100 mol by acidolysis of tuna oil and commercial PA, catalyzed by the non-positionally specific lipase Novozym 435. Then these TAGs were purified neutralizing the free fatty acids (FFAs) by KOH hydroethanolic solutions and extracting TAGs with hexane; these TAGs were completely recovered as pure TAGs (without FFAs). The third step involved the displacement of fatty acids located at sn-1,3 positions by acidolysis of PA and DHA enriched TAGs with OA rich FFAs, catalyzed by the sn-1,3 specific lipase DF from Rhizopus oryzae, immobilized on Accurel MP-1000; TAGs with 67 mol OA/100 mol at sn-1,3 positions and 52.1 and 15.4 mol PA and DHA, respectively, per 100 mol at sn-2 position were obtained. Both acidolysis reactions were carried out in stirred tank reactors (STRs) with lipase both dispersed in the reaction medium and contained in a cartridge filter attached to the stirrer rod. Finally STAGs were purified and obtained with yields of over 80 mol STAGs/100 mol STAGs in the reaction product (no FFAs were detected).     

A comprehensive study of hazelnut oil composition with comparisons to other vegetable oils,particularly olive oil.

Crude and refined hazelnut oils from different countries were characterised by major and minor compounds. Fatty acids, triacylglycerides, waxes, sterols, methyl-sterols, terpenic and aliphatic alcohols, tocopherols, tocotrienols and hydrocarbons were identified and quantified by gas chromatography and high-performance liquid chromatography. The levels of these chemical compounds in hazelnut oils together with the equivalent carbon numbers and triacylglyceride carbon numbers, were compared with the results of analyses of samples of other vegetable oils. The statistical procedure of cluster analysis was used to characterise hazelnut oils versus other edible oils.     

Photochemistry of 4-chlorophenol on cellulose and silica

The photochemistry of 4-chlorophenol (4-CP) was studied on silica and cellulose, using time-resolved diffuse reflectance techniques and product degradation analysis. The results have shown that the photochemistry of 4-CP depends on the support, on the concentration, and also on the sample preparation method. Transient absorption and photoproduct results can be understood by assuming the formation of the carbene 4-oxocyclohexa-2,5-dienylidene in both supports. On cellulose, at concentrations lower than 10 micromol g(-1), the carbene leads to the unsubstituted phenoxyl radical, and phenol is the main degradation product. At higher concentrations a new transient resulting from phenoxyl radicals coupling was also observed, and dihydroxybiphenyls are also formed. The reaction of the carbene with ground-state 4-CP was also detected through the formation of 5-chloro-2,4'-dihydroxybiphenyl. 4-Chlorophenoxyl radical and degradations products resulting from its coupling were also detected. Oxygen has little effect on the photochemistry of 4-CP on cellulose. On silica the transient benzoquinone O-oxide was formed in the presence of oxygen. Benzoquinone and hydroquinone are the main degradation products. In well-dried samples the formation of hydroquinone is reduced. At higher concentrations the same products as detected on cellulose were observed. 4-CP undergoes slow photochemical decomposition under solar radiation in both supports. The same main degradation products were observed in these conditions.     

Aflatoxin production in three selected samples of triticale,wheat and rye grown in Argentina

Little is known about mycotoxin contamination of triticale, a hybrid resulting from crossing wheat and rye. The purpose of the present work was to evaluate triticale as a substrate for aflatoxin accumulation in comparison with its parents. Aflatoxin (B₁, B₂, G₁ and G₂) accumulation curves were obtained for the three substrates inoculated with Aspergillus parasiticus NRRL 2999 and incubated at 25 °C and water activity 0.925 for 10 weeks. Wheat and triticale were poor substrates for aflatoxin production. Rye was more prone than the other substrates to fast colonisation by A parasiticus and accumulated larger aflatoxin quantities over the whole incubation period. The maximum aflatoxin concentration in rye (11 840 µg kg⁻¹) was significantly larger (p < 0.05) than those obtained in wheat (2150 µg kg⁻¹) and triticale (2850 µg kg⁻¹). © 2000 Society of Chemical Industry     

Adverse effects of pharmacological therapy for nicotine addiction in smokers following a smoking cessation program.

This multicenter, community-based, prospective, longitudinal study evaluated the safety of nicotine replacement therapy (NRT), bupropion, and combined therapy of NRT and bupropion for smokers seeking to quit, when these therapies were used under real-world conditions following a smoking cessation program. Participants were smokers aged 18 years or older who attended five smoking cessation clinics. Evaluations were made at 15, 30, 60, and 90 days. We investigated the possible existence of adverse effects as well as the severity of each adverse effect and its influence on the treatment course. The study included 904 smokers: 370 received NRT, 413 received bupropion, and 121 received combined therapy. At 15, 30, 60, and 90 days, adverse effects were reported by 43.8%, 33.1%, 22.3%, and 5.7% of subjects, respectively. Adverse effects were significantly more frequent in subjects receiving combined therapy or bupropion alone than in NRT-treated subjects at the 15-, 30-, and 60-day follow-ups. A total of 83 smokers (9.3%) withdrew from treatment and 116 (12.8%) stopped temporarily because of adverse effects. No differences were found in the percentages of discontinuation among the different treatment options. Adverse effects rarely were severe (n=10). Nevertheless, 41 subjects (4.5%) discontinued drug therapy indefinitely and 55 (6.1%) discontinued it temporarily because of mild adverse effects. Pharmacological therapies for smoking cessation are safe as long as they are appropriately prescribed and supervised by clinicians according to clinical practice guidelines. Adverse effects are primarily mild. Nonetheless, mild adverse effects may be perceived by patients as a serious enough problem to cause them to discontinue treatment.     

Arsenic removal using polymer-supported hydrated iron(III) oxide nanoparticles: role of donnan membrane effect

The conditions leading to the Donnan membrane equilibrium arise from the inability of ions to diffuse out from one phase in a heterogeneous system. In a polymeric cation exchanger, negatively charged sulfonic acid groups are covalently attached to the polymer chains, and thus, they cannot permeate out of the polymer phase. Conversely, a polymeric anion exchanger contains a high concentration of non-diffusible positively charged quaternary ammonium functional groups. It is well-established that submicron or nanoscale hydrated iron(III) oxide (HFO) particles exhibit high sorption affinity toward both arsenates and arsenites. In this study, commercially available cation and anion exchangers were used as host materials for dispersing HFO nanoparticles within the polymer phase using a technique previously developed. The resulting polymeric/inorganic hybrid sorbent particles were subsequently used for arsenic removal in the laboratory. The most significant finding of the study is that the anion exchanger as a substrate containing dispersed HFO offered substantially higher arsenate removal capacity as compared to the cation exchanger, all other conditions remaining identical. In fact, HFO nanoparticles dispersed within the gel-type cation exchanger were unable to remove arsenic. The Donnan membrane effect resulting from the nondiffusible negatively charged sulfonic acid groups in the cation exchanger did not allow permeation of arsenate into the polymer phase (i.e., arsenate was excluded from the spherical beads dispersed with HFO nanoparticles). On the contrary, anion-exchanger-supported HFO particles or HAIX offered very high arsenic removal capacity; less than 10% of influent arsenic broke through after 10 000 bed vol. HAIX was also amenable to efficient regeneration with 2% NaOH and 3% NaCl and capable of simultaneously removing both perchlorate and arsenic selectively. According to the information in the open literature, HAIX is the first hybrid sorbent that utilizes the Donnan membrane effect of the host material for sorption enhancement. From a generic viewpoint, other metal oxide/metal nanoparticles may also be judiciously embedded in appropriate support materials that would reject or enhance permeation of targeted ionic solutes.     

Quantification of particle number emission factors for motor vehicles from on-road measurements

The database on particle number emission factors has been very limited to date despite the increasing interest in the effects of human exposure to particles in the submicrometer range. There are also major questions on the comparability of emission factors derived through dynamometer versus on-road studies. Thus, the aims of this study were (1) to quantify vehicle number emission factors in the submicrometer (and also supermicrometer) range for stop-start and free-flowing traffic at about 100 km h(-1) driving conditions through extensive road measurements and (2) to compare the emission factors from the road measurements with those obtained previously from dynamometer studies conducted in Brisbane. For submicrometer particles the average emission factors for Tora Street were estimated at (1.89 +/- 3.40) x 10(13) particles km(-1) (mean +/- standard error; n = 386) for petrol and (7.17 +/- 2.80) x 10(14) particles km(-1) (diesel; n = 196) and for supermicrometer particles at 2.59 x 10(9) particles km(-1) and 1.53 x 10(12) particles km(-1), respectively. The average number emission factors for submicrometer particles estimated for Ipswich Road (stop-start traffic mode) were (2.18 +/- 0.57) x 10(13) particles km(-1) (petrol) and (2.04 +/- 0.24) x 10(14) particles km(-1) (diesel). One implication of the conclusion that emission factors of heavy duty diesel vehicles are over 1 order of magnitude higher than emission factors of petrol-fueled passenger cars is that future control and management strategies should in particular target heavy duty vehicles, as even a moderate decrease in emissions of these vehicles would have a significant impact on lowering atmospheric concentrations of particles. The finding that particle number emissions per vehicle-km are significantly larger for higher speed vehicle operation has an important implication on urban traffic planning and optimization of vehicle speed to lower their impact on airborne pollution. Additionally, statistical analysis showed that neither the measuring method (dynamometer or on-road), nor data origin (Brisbane or elsewhere in the world), is associated with a statistically significant difference between the average values of emission factors for diesel, petrol, and vehicle fleet mix. However, statistical analyses of the effect of fuel showed that the mean values of emission factors for petrol and diesel are different at a 5% significance level.     

GC–MS Characterization of Volatile Compounds in Habanero Pepper (Capsicum chinense Jacq.) by Optimization of Headspace Solid-Phase Microextraction Conditions

Food Analytical Methods - The habanero pepper (Capsicum chinense Jacq.) is very aromatic and is the hottest pepper in the world. In this study, a headspace solid-phase microextraction/gas...