Modulation of Induced Cytotoxicity of Doxorubicin by Using Apoferritin and Liposomal Cages

Doxorubicin is an effective chemotherapeutic drug, however, its toxicity is a significant limitation in therapy. Encapsulation of doxorubicin inside liposomes or ferritin cages decreases cardiotoxicity while maintaining anticancer potency. We synthesized novel apoferritin- and liposome-encapsulated forms of doxorubicin (“Apodox” and “lip-8-dox”) and compared its toxicity with doxorubicin and Myocet on prostate cell lines. Three different prostatic cell lines PNT1A, 22Rv1, and LNCaP were chosen. The toxicity of the modified doxorubicin forms was compared to conventional doxorubicin using the MTT assay, real-time cell impedance-based cell growth method (RTCA), and flow cytometry. The efficiency of doxorubicin entrapment was 56% in apoferritin cages and 42% in the liposome carrier. The accuracy of the RTCA system was verified by flow-cytometric analysis of cell viability. The doxorubicin half maximal inhibition concentrations (IC₅₀) were determined as 170.5, 234.0, and 169.0 nM for PNT1A, 22Rv1, and LNCaP, respectively by RTCA. Lip8-dox is less toxic on the non-tumor cell line PNT1A compared to doxorubicin, while still maintaining the toxicity to tumorous cell lines similar to doxorubicin or epirubicin (IC₅₀ = 2076.7 nM for PNT1A vs. 935.3 and 729.0 nM for 22Rv1 and LNCaP). Apodox IC₅₀ was determined as follows: 603.1, 1344.2, and 931.2 nM for PNT1A, 22Rv1, and LNCaP.     

Characterizing Brittle Fracture by Modeling Crack Deflection Angles from the Microstructure

This study introduces a simple analytical model for fracture toughness to bridge the length scales from grain size to bulk thickness by assembling a virtual crack path from the angles recorded on an unfractured microstructure, which is a great challenge in fracture mechanics due to the high geometrical complexity. Good agreement is found between a crack deflection angle distribution measured from 5764 crack segments and the prediction by the model and the possible influence of residual stress is quasi quantitatively discussed. A total of 7.4% of the crack segments observed acted as crack bridges, while 7.3% was predicted by the model. A quantification of how high an angle needs to be to turn crack deflection into crack bridging is given. The ratio of fracture toughness from grain boundary to grain, G_1c(gb)/G_1c(g), was measured indirectly from all samples to be between 0.3 and 0.35.     

Chemical information media in the chemistry lecture hall: a comparative assessment of two online encyclopedias

The chemistry encyclopedia R?mpp Online and the German universal encyclopedia Wikipedia were assessed by first-year university students on the basis of a set of 30 articles about chemical thermodynamics. Criteria with regard to both content and form were applied in the comparison; 619 ratings (48% participation rate) were returned. While both encyclopedias obtained very good marks and performed nearly equally with regard to their accuracy, the average overall mark for Wikipedia was better than for R?mpp Online, which obtained lower marks with regard to completeness and length. Analysis of the results and participants' comments shows that students attach importance to completeness, length and comprehensibility rather than accuracy, and also attribute less value to the availability of sources which validate an encyclopedia article. Both encyclopedias can be promoted as a starting reference to access a topic in chemistry. However, it is recommended that instructors should insist that students do not rely solely on encyclopedia texts, but use and cite primary literature in their reports.     

Development of size-selective sampling of Bacillus anthracis surrogate spores from simulated building air intake mixtures for analysis via laser-induced breakdown spectroscopy

Size-selective sampling of Bacillus anthracis surrogate spores from realistic, common aerosol mixtures was developed for analysis by laser-induced breakdown spectroscopy (LIBS). A two-stage impactor was found to be the preferential sampling technique for LIBS analysis because it was able to concentrate the spores in the mixtures while decreasing the collection of potentially interfering aerosols. Three common spore/aerosol scenarios were evaluated, diesel truck exhaust (to simulate a truck running outside of a building air intake), urban outdoor aerosol (to simulate common building air), and finally a protein aerosol (to simulate either an agent mixture (ricin/anthrax) or a contaminated anthrax sample). Two statistical methods, linear correlation and principal component analysis, were assessed for differentiation of surrogate spore spectra from other common aerosols. Criteria for determining percentages of false positives and false negatives via correlation analysis were evaluated. A single laser shot analysis of approximately 4 percent of the spores in a mixture of 0.75 m(3) urban outdoor air doped with approximately 1.1 x 10(5) spores resulted in a 0.04 proportion of false negatives. For that same sample volume of urban air without spores, the proportion of false positives was 0.08.     

Nanochannel-based single molecule recycling

We present a method for measuring the fluorescence from a single molecule hundreds of times without surface immobilization. The approach is based on the use of electroosmosis to repeatedly drive a single target molecule in a fused silica nanochannel through a stationary laser focus. Single molecule fluorescence detected during the transit time through the laser focus is used to repeatedly reverse the electrical potential controlling the flow direction. Our method does not rely on continuous observation and therefore is less susceptible to fluorescence blinking than existing fluorescence-based trapping schemes. The variation in the turnaround times can be used to measure the diffusion coefficient on a single molecule level. We demonstrate the ability to recycle both proteins and DNA in nanochannels and show that the procedure can be combined with single-pair F?rster energy transfer. Nanochannel-based single molecule recycling holds promise for studying conformational dynamics on the same single molecule in solution and without surface tethering.     

Hydrodynamics of quenching with impinging free-surface jet

The hydrodynamics of jet impingement quenching of a stainless steel specimen has been studied experimentally. The specimen is heated to an initial temperature of about 900 °C and then quenched by a subcooled free-surface water jet. High-speed imaging shows that the free-surface of the water film in the wetted region is smooth. The water film outside the wetted region is deflected away from the surface and then breaks into droplets due to surface tension and shear forces. The splashed droplet velocity is found to be low up to a wetting front radius of 6 mm (r/d_J ≈ 2), beyond which it increases rapidly before reaching a constant value at a wetting front radius of about 8 to 10 mm (2.67 ? r/d_J ? 3.34). The water film velocity at the wetting front is calculated using the single-phase boundary layer model suggested by Watson [2]. At moderate subcooling, the splashed droplet velocity up to a wetting front radius of 10 mm (r/d_J ≈ 3.34) is found to be much lower than the estimated single-phase film velocity. The study shows that although the wetted region may appear devoid of any bubbles, strong two-phase flow occurs within this region.     

Bacterial chemotaxis along vapor-phase gradients of naphthalene

The role of bacterial growth and translocation for the bioremediation of organic contaminants in the vadose zone is poorly understood. Whereas air-filled pores restrict the mobility of bacteria, diffusion of volatile organic compounds in air is more efficient than in water. Past research, however, has focused on chemotactic swimming of bacteria along gradients of water-dissolved chemicals. In this study we tested if and to what extent Pseudomonas putida PpG7 (NAH7) chemotactically reacts to vapor-phase gradients forming above their swimming medium by the volatilization from a spot source of solid naphthalene. The development of an aqueous naphthalene gradient by air-water partitioning was largely suppressed by means of activated carbon in the agar. Surprisingly, strain PpG7 was repelled by vapor-phase naphthalene although the steady state gaseous concentrations were 50-100 times lower than the aqueous concentrations that result in positive chemotaxis of the same strain. It is thus assumed that the efficient gas-phase diffusion resulting in a steady, and possibly toxic, naphthalene flux to the cells controlled the chemotactic reaction rather than the concentration to which the cells were exposed. To our knowledge this is the first demonstration of apparent chemotactic behavior of bacteria in response to vapor-phase effector gradients.     

Photoelectrochemical and photocatalytic properties of titanium (IV) oxide nanoparticulate layers

Titania nanostructured particles were produced by the sol-gel method in the reverse micelle environment treated thermally and by various extraction steps including supercritical carbon dioxide, subcritical water and their combinations. Thin films comprised of the organized nanoparticles were tested in photoelectrochemical and photocatalytic experiments. The former were configured for the open circuit potential measurements and evaluation of polarization curves and the corresponding photocurrents. Photocatalytic activities of the layered films were assessed by following decomposition of the methyl ester of stearic acid. Attention was also paid to evaluation of the extent of the surface wettability of the layers. The effect of content of residual surface carbon, extent of hydrophilic properties and presence of anatase structure were identified as essential parameters responsible for the enhanced photoactivity of the tested layers. On the other hand also layers treated without any thermal steps revealed certain level of photoactivity that might be of special importance in some specific applications.     

CVD Grown Tungsten Oxide for Low Temperature Hydrogen Sensing: Tuning Surface Characteristics via Materials Processing for Sensing Applications

The intrinsic properties of semiconducting oxides having nanostructured morphology are highly appealing for gas sensing. In this study, the fabrication of nanostructured WO₃ thin films with promising surface characteristics for hydrogen (H₂) gas sensing applications is accomplished. This is enabled by developing a chemical vapor deposition (CVD) process employing a new and volatile tungsten precursor bis(diisopropylamido)-bis(tert-butylimido)-tungsten(VI), [W(N^tBu)₂(NⁱPr₂)₂]. The as-grown nanostructured WO₃ layers are thoroughly analyzed. Particular attention is paid to stoichiometry, surface characteristics, and morphology, all of which strongly influence the gas-sensing potential of WO₃. Synchrotron-based ultraviolet photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS), X-ray photoelectron emission microscopy (XPEEM), low-energy electron microscopy (LEEM) and 4-point van der Pauw (vdP) technique made it possible to analyze the surface chemistry and structural uniformity with a spatially resolved insight into the chemical, electronic and electrical properties. The WO₃ layer is employed as a hydrogen (H₂) sensor within interdigitated mini-mobile sensor architecture capable of working using a standard computer's 5 V 1-wirebus connection. The sensor shows remarkable sensitivity toward H₂. The high, robust, and repeatable sensor response (S) is attributed to the homogenous distribution of the W⁵⁺ oxidation state and associated oxygen vacancies, as shown by synchrotron-based UPS, XPS, and XPEEM analysis.     

Comparative study of a simulative bearing design with an experimentally determined data of a prototype bearing

Forschung im Ingenieurwesen - In some specific applications, the need of an optimized rolling bearing, having a similar load carrying capacity as a tapered roller bearing but with...