Na+ and/or Cl− Toxicities Determine Salt Sensitivity in Soybean (Glycine max (L.) Merr.), Mungbean (Vigna radiata (L.) R. Wilczek), Cowpea (Vigna unguiculata (L.) Walp.), and Common Bean (Phaseolus vulgaris L.)

Grain legumes are important crops, but they are salt sensitive. This research dissected the responses of four (sub)tropical grain legumes to ionic components (Na⁺ and/or Cl⁻) of salt stress. Soybean, mungbean, cowpea, and common bean were subjected to NaCl, Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and a “high cation” negative control for 57 days. Growth, leaf gas exchange, and tissue ion concentrations were assessed at different growing stages. For soybean, NaCl and Na⁺ salts impaired seed dry mass (30% of control), more so than Cl⁻ salts (60% of control). All treatments impaired mungbean growth, with NaCl and Cl⁻ salt treatments affecting seed dry mass the most (2% of control). For cowpea, NaCl had the greatest adverse impact on seed dry mass (20% of control), while Na⁺ salts and Cl⁻ salts had similar intermediate effects (~45% of control). For common bean, NaCl had the greatest adverse effect on seed dry mass (4% of control), while Na⁺ salts and Cl⁻ salts impaired seed dry mass to a lesser extent (~45% of control). NaCl and Na⁺ salts (without Cl⁻) affected the photosynthesis (P_n) of soybean more than Cl⁻ salts (without Na⁺) (50% of control), while the reverse was true for mungbean. Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and NaCl had similar adverse effects on P_n of cowpea and common bean (~70% of control). In conclusion, salt sensitivity is predominantly determined by Na⁺ toxicity in soybean, Cl⁻ toxicity in mungbean, and both Na⁺ and Cl⁻ toxicity in cowpea and common bean.     

Toward Better Understanding of Task Difficulty during Physicians’ Interaction with Electronic Health Record System (EHRs)

ABSTRACT

The goal of this study was to assess the relationship of task difficulty and mental effort with performance during physicians’ interaction with electronic health records (EHRs). A total of 38 physicians were asked to identify abnormal results and take follow-up action to “close the loop” on care delivery. Task difficulty was quantified via task-flow strategies and computer mouse-click patterns. Mental effort was quantified using eye movements based on changes in pupillary dilations (task evoked pupillary response or TEPR) and blink rate. Performance was quantified based on commission errors (error vs. no-error). Results indicated that physicians had different task-flow strategies; however, with improved awareness of the patient status, they exhibited an optimal task-flow strategy. Overall, performance was related to task-flow strategies, computer mouse-click patterns, and blink rate, indicating that physicians had lower task-difficulty and experienced lower mental effort with improved awareness of patient follow-up status. This is an important finding demonstrating that task-flows are a dominant predictor of physician performance when comparing between EHR designs. On the contrary, mouse-click patterns and blink rate are both useful predictors of physician performance when assessment was done within an EHR.     

The Potential Role of SP-G as Surface Tension Regulator in Tear Film: From Molecular Simulations to Experimental Observations

The ocular surface is in constant interaction with the environment and with numerous pathogens. Therefore, complex mechanisms such as a stable tear film and local immune defense mechanisms are required to protect the eye. This study describes the detection, characterization, and putative role of surfactant protein G (SP-G/SFTA2) with respect to wound healing and surface activity. Bioinformatic, biochemical, and immunological methods were combined to elucidate the role of SP-G in tear film. The results show the presence of SP-G in ocular surface tissues and tear film (TF). Increased expression of SP-G was demonstrated in TF of patients with dry eye disease (DED). Addition of recombinant SP-G in combination with lipids led to an accelerated wound healing of human corneal cells as well as to a reduction of TF surface tension. Molecular modeling of TF suggest that SP-G may regulate tear film surface tension and improve its stability through specific interactions with lipids components of the tear film. In conclusion, SP-G is an ocular surface protein with putative wound healing properties that can also reduce the surface tension of the tear film.     

Effect of Ti,Nb, and Ti + Nb Coatings on the Bond Strength-Structure Relationship in Al/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Joints

There is a growing interest in metal-ceramic bonding for wide range of applications in electronic devices and high technology industry for fabrication of metal matrix composites and bonding of ceramic components to metals. The object of the work was to study the effect of Ti, Nb, and Ti + Nb thin films deposited by PVD method on alumina substrates on structure and bond strength properties of Al/Al₂O₃ joints. The joints were fabricated using the results of a wetting experiment and the sessile drop method at a temperature of 1223 K in a vacuum of 0.2 MPa for 30 min of contact. The structure of the metal/ceramic interface was investigated using scanning electron microscopy. The elemental distribution at the metal-ceramic interface was analyzed using energy dispersive x-ray spectroscopy. Transmission electron microscopy was also used to investigate some aspects of the metal/ceramic interface. The bond strength properties of joints were measured using shear test. The shear strength results demonstrated significant improvement of shear strength of Al/Al₂O₃ joints due to the application of Ti + Nb thin film on alumina substrate. Microstructural investigations of the interface indicated that Al/coating/Al₂O₃ couples have diffusion transition interface which influences the strengthening of these joints. A conclusion could be drawn that the presence of thin film layers changes the character of interaction and leads to the formation of new reaction products in the bonding layer.     

Toughening of syndiotactic polypropylene with chalk

We hypothesized that polymer crystal anisotropy is advantageous for toughening of polymer composites involving easy slip network of oriented crystalline layers around filler particles. To this end, composites of syndiotactic polypropylene (sPP) with high concentration of submicrometer calcium carbonate particles were prepared and examined because usual sPP crystals exhibit high packing anisotropy. The specific orientation of sPP lamellae around chalk grains was found, which is supposed to facilitate the plastic deformation of polymer matrices. The compression molded bars of the composite exhibited markedly higher Izod impact strength than those of neat sPP. Toughening was even enhanced in the injection molded composite, for which 4.5‐fold increase in the impact strength was achieved. Injection‐induced orientation of the disordered form I sPP crystals was enhanced in the composite. The injection molded tensile specimens exhibited also a good drawability. Debonding at chalk–sPP interface occurred both during the impact and tensile tests facilitating the plastic deformation of sPP matrix. Chalk did not have any significant influence on the thermal properties of the composites but it affected the rheological behavior, increasing the loss and storage moduli, and the viscosity. Highly filled sPP composite exhibited solid‐like behavior in a molten state with the storage modulus exceeding the loss modulus in the entire frequency range. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43651.     

Measurement of mechanical properties in a 316L stainless steel welded joint

The aim of this study was to measure the mechanical properties of weld material taken from a single weld bead laid down on a 316L steel plate. Due to the low available volume of weld material, microsamples with a total length of 5.5 mm were used. The Digital Image Correlation method (DIC), which enables measurement of mechanical properties of very small samples, was employed for the strain measurements in a uniaxial tensile test. Samples were cut out from three different zones of the specimen: plate, weld, and the heat affected zone. The material from heat affected zone showed the highest value of the Ultimate Tensile Strength (UTS) (580 ± 7 MPa) and yield strength (339 ± 6 MPa). Plate material had lower UTS (559 ± 5 MPa) and yield strength (304 ± 7 MPa). The lowest values of UTS (526 ± 6 MPa) and yield strength (291 ± 8 MPa) have been revealed for the weld. The values obtained for UTS, yield strength and elongation to failure for the plate material were compared with data obtained using standard test specimens. No significant differences between results obtained for the microsamples and standard samples have been found.     

Highly scalable and robust rule learner: performance evaluation and comparison.

Business intelligence and bioinformatics applications increasingly require the mining of datasets consisting of millions of data points, or crafting real-time enterprise-level decision support systems for large corporations and drug companies. In all cases, there needs to be an underlying data mining system, and this mining system must be highly scalable. To this end, we describe a new rule learner called DataSqueezer. The learner belongs to the family of inductive supervised rule extraction algorithms. DataSqueezer is a simple, greedy, rule builder that generates a set of production rules from labeled input data. In spite of its relative simplicity, DataSqueezer is a very effective learner. The rules generated by the algorithm are compact, comprehensible, and have accuracy comparable to rules generated by other state-of-the-art rule extraction algorithms. The main advantages of DataSqueezer are very high efficiency, and missing data resistance. DataSqueezer exhibits log-linear asymptotic complexity with the number of training examples, and it is faster than other state-of-the-art rule learners. The learner is also robust to large quantities of missing data, as verified by extensive experimental comparison with the other learners. DataSqueezer is thus well suited to modern data mining and business intelligence tasks, which commonly involve huge datasets with a large fraction of missing data.     

Moment stability for linear systems with a random parametric excitation

Moment stability for linear systems with a nonwhite parametric noise is considered. A method of reduction of the study of this stability to the study of stability for large-scale matrices is proposed. Mean square stability diagrams for random harmonic oscillator are presented.     

Trellis: Portability across architectures with a high-level framework

The increasing computational needs of parallel applications inevitably require portability across parallel architectures, which now include heterogeneous processing resources, such as CPUs and GPUs, and multiple SIMD/SIMT widths. However, the lack of a common parallel programming paradigm that provides predictable, near-optimal performance on each resource leads to the use of low-level frameworks with architecture-specific optimizations, which in turn cause the code base to diverge and makes porting difficult. Our experiences with parallel applications and frameworks lead us to the conclusion that achieving performance portability requires a common set of high-level directives and efficient mapping onto each architecture.     

Identification of tubulin drug binding sites and prediction of relative differences in binding affinities to tubulin isotypes using digital signal processing

Microtubules are involved in numerous cellular processes including chromosome segregation during mitosis and, as a result, their constituent protein, tubulin, has become a successful target of several chemotherapeutic drugs. In general, these drugs bind indiscriminately to tubulin within both cancerous and healthy cells, resulting in unwanted side effects. However, differences between beta-tubulin isotypes expressed in a wide range of cell types may aid in the development of anti-tubulin drugs having increased specificity for only certain types of cells. Here, we describe a digital signal processing (DSP) method that is capable of predicting hot spots for the tubulin family of proteins as well as determining relative differences in binding affinities to these hot spots based only on the primary sequence of 10 human tubulin isotypes. Due to the fact that several drug binding sites have already been characterized within beta-tubulin, we are able to correlate hot spots with the binding sites for known chemotherapy drugs. We have also verified the accuracy of this method using the correlation between the binding affinities of characterized drugs and the tubulin isotypes. Additionally, the DSP method enables the rapid estimation of relative differences in binding affinities within the binding sites of tubulin isotypes that are yet to be experimentally determined.