A nanoporous interferometric micro-sensor for biomedical detection of volatile sulphur compounds

ABSTRACT: This work presents the use of nanoporous anodic aluminium oxide [AAO] for reflective interferometric sensing of volatile sulphur compounds and hydrogen sulphide [H2S] gas. Detection is based on changes of the interference signal from AAO porous layer as a result of specific adsorption of gas molecules with sulphur functional groups on a gold-coated surface. A nanoporous AAO sensing platform with optimised pore diameters (30 nm) and length (4 μm) was fabricated using a two-step anodization process in 0.3 M oxalic, followed by coating with a thin gold film (8 nm). The AAO is assembled in a specially designed microfluidic chip supported with a miniature fibre optic system that is able to measure changes of reflective interference signal (Fabry-Perrot fringes). When the sensor is exposed to a small concentration of H2S gas, the interference signal showed a concentration-dependent wavelength shifting of the Fabry-Perot interference fringe spectrum, as a result of the adsorption of H2S molecules on the Au surface and changes in the refractive index of the AAO. A practical biomedical application of reflectometric interference spectroscopy [RIfS] Au-AAO sensor for malodour measurement was successfully shown. The RIfS method based on a nanoporous AAO platform is simple, easy to miniaturise, inexpensive and has great potential for development of gas sensing devices for a range of medical and environmental applications.     

Quick evaluation of voltage surge in electrical power systems

The lattice diagram has been widely recognized and adopted to analyze the voltage surges produced at a particular location in an electrical system. These transient surges are caused by traveling waves induced by lightning strokes or switching operations. A lattice diagram can be used effectively, but the required computations are tedious. A simplified approach based on mathematical derivation is presented. The method will permit a quick evaluation of both initial and crest surge magnitudes as well as a wave shape that are all based on a given incoming surge and the surge impedances of the electrical elements involved. Sample calculations from the lattice diagram and the proposed quick evaluation are compared     

Fragmentation and film growth in supersonic nanoaggregate aerosol deposition

Aerosol deposition with gas phase-synthesized chain-like nanoaggregates can yield dense coatings from the impaction of particles on a substrate; however, dense coating formation is not well understood. Here, we study coating consolidation at the single nanoaggregate level. Flame spray pyrolysis-made tin oxide nanoaggregates are mobility (size) filtered, accelerated through a de Laval nozzle, and impacted on alumina substrates. TEM images obtained from low velocity collection and supersonic deposition are compared via quantitative image analysis, which reveals that upon supersonic impact nanoaggregates fragment into smaller aggregates. This suggests that fragmentation is a key step in producing coatings denser than the depositing nanoaggregates themselves. We supplement experiments with detailed particle trajectory calculations, which show that the impact energies per atom during nanoaggregate deposition are below 0.2 eV/molecule. These results suggest that fragmentation can only occur at locations where nanoaggregates bonded by van der Waals and capillary interactions.     

Structural Influence on the Thermal Conversion of Self‐Catalyzed HfB2/ZrB2 Sol–Gel Precursors by Rapid Ultrasonication of Oxychloride Hydrates

Sol–gel precursors to HfB₂ and ZrB₂ are processed by high‐energy ultrasonication of Hf,Zr oxychloride hydrates, triethyl borate, and phenolic resin to form precipitate‐free sols that turn into stable gels with no catalyst addition. Both precursor concentration and structure (a sol or a gel) are found to influence the synthesis of the diboride phase at high temperature. Decreasing sol concentration increases powder surface area from 3.6 to 6.8 m²/g, whereas heat‐treating a gel leads to residual oxides and carbides. Particles are either fine spherical particles, unique elongated rods, and/or platelets, indicating particle growth with directional coarsening. Investigation of the conversion process to ZrB₂ indicates that a multistep reaction is likely taking place with: (1) ZrC formation, (2) ZrC reacts with B₂O₃ or ZrC reacts with B₂O₃ and C to form ZrB₂. At low temperatures, ZrC formation is limiting, while at higher temperatures the reaction of ZrC to ZrB₂ becomes rate limiting. ZrC is found to be a direct reducing agent for B₂O₃ at low temperature (~1200°C) to form ZrB₂ and ZrO₂, whereas at high temperatures (~1500°C) it reacts with B₂O₃ and C to form pure ZrB₂.     

Discovery of Quinoline‐Derived Trifluoromethyl Alcohols,Determination of Their in vivo Toxicity and Anticancer Activity in a Zebrafish Embryo Model

In this study the rational design, synthesis, and anticancer activity of quinoline‐derived trifluoromethyl alcohols were evaluated. Members of this novel class of trifluoromethyl alcohols were identified as potent growth inhibitors in a zebrafish embryo model. Synthesis of these compounds was carried out with an sp³‐C?H functionalization strategy of methyl quinolines with trifluoromethyl ketones. A zebrafish embryo model was also used to explore the toxicity of ethyl 4,4,4‐trifluoro‐3‐hydroxy‐3‐(quinolin‐2‐ylmethyl)butanoate ( 1 ), 2‐benzyl‐1,1,1‐trifluoro‐3‐(quinolin‐2‐yl)propan‐2‐ol ( 2 ), and trifluoro‐3‐(isoquinolin‐1‐yl)‐2‐(thiophen‐2‐yl)propan‐2‐ol ( 3 ). Compounds 2 and 3 were found to be more toxic than compound 1 ; apoptotic staining assays indicated that compound 3 causes increased cell death. In vitro cell proliferation assays showed that compound 2 , with an LC₅₀ value of 14.14 μm , has more potent anticancer activity than cisplatin. This novel class of inhibitors provides a new direction in the discovery of effective anticancer agents.     

Oxidation Behavior of Aerospace Materials in High Enthalpy Flows Using an Oxyacetylene Torch Facility

The oxyacetylene torch facility is used to measure the ablation rates of graphite and the surface temperatures of different aerospace materials. The free‐stream flame environment is characterized as a function of flame chemistry for heat flux, pO₂, and flow velocity. Measured ablation rates for graphite increase as a function of increasing heat flux and pO₂, which are validated by applying an oxygen diffusion based model. The model uses experimentally measured values for temperature, pO₂, and gas velocity in order to confirm torch testing results are reliable and reproducible. Surface temperatures of ultra‐high temperature ceramic composites are measured as a function of increasing heat flux and show an enthalpic cooling effect on the flame during oxidation testing.     

Investigation of the Impacts of Gamma Radiolysis on an Advanced TALSPEAK Separation

The advanced TALSPEAK process is a selective solvent extraction that utilizes 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) to separate lanthanide elements from trivalent actinides, which are held back in the aqueous phase by N-hydroxylethyl-N,N’,N’-ethylenediamine triacetic acid (HEDTA) buffered by citric acid. Gamma irradiation of an experiment containing Eu(III) and Am(III) as representative lanthanide and actinide elements resulted in higher distribution ratios of both and separation factors which decreased in an exponential fashion with increasing dose. Analysis of the reagents showed that the HEDTA concentration also decreased in an exponential fashion, strongly suggesting that degradation was correlated with loss of separation selectivity. In contrast, the concentration of citrate was unaffected, and while the concentration of HEH[EHP] did decrease, its dose-dependent kinetic profile indicated that it was not limiting partitioning. A second set of experiments were conducted using a citrate concentration that was 7.5 X higher, with the expectation that citrate would protect the HEDTA by scavenging radiolytically formed OH radicals. HEDTA degradation was significantly mitigated at higher gamma doses, but the Eu-Am separation was worse than in the low citrate experiments, presumably because at the high citrate concentrations, the Eu-citrate complexes formed in abundances competitive with the Am complexes, and are more effectively held back in the aqueous phase.     

Effect of betaine supplementation on cycling sprint performance

Purpose

To examine the effect of betaine supplementation on cycling sprint performance.

Methods

Sixteen recreationally active subjects (7 females and 9 males) completed three sprint tests, each consisting of four 12 sec efforts against a resistance equal to 5.5% of body weight; efforts were separated by 2.5 min of cycling at zero resistance. Test one established baseline; test two and three were preceded by seven days of daily consumption of 591 ml of a carbohydrate-electrolyte beverage as a placebo or a carbohydrate-electrolyte beverage containing 0.42% betaine (approximately 2.5 grams of betaine a day); half the beverage was consumed in the morning and the other half in the afternoon. We used a double blind random order cross-over design; there was a 3 wk washout between trials two and three. Average and maximum peak and mean power were analyzed with one-way repeated measures ANOVA and, where indicated, a Student Newman-Keuls.

Results

Compared to baseline, betaine ingestion increased average peak power (6.4%; p < 0.001), maximum peak power (5.7%; p < 0.001), average mean power (5.4%; p = 0.004), and maximum mean power (4.4%; p = 0.004) for all subjects combined. Compared to placebo, betaine ingestion significantly increased average peak power (3.4%; p = 0.026), maximum peak power max (3.8%; p = 0.007), average mean power (3.3%; p = 0.034), and maximum mean power (3.5%; p = 0.011) for all subjects combined. There were no differences between the placebo and baseline trials.

Conclusions

One week of betaine ingestion improved cycling sprint power in recreationally active males and females.     

Phase development and pore stability of yttria- and ytterbia-stabilized zirconia aerogels

High-porosity yttria- and ytterbia-stabilized zirconia aerogels offer the potential of extremely low thermal conductivity materials for high-temperature applications. Yttria- and ytterbia-doped zirconia aerogels were synthesized using a sol-gel approach over the dopant range of 0-20 atomic percent. Surface area, pore volume, and morphology of the as-dried aerogels and materials thermally exposed for short periods of time to temperatures up to 1200°C were characterized by nitrogen physisorption, scanning and transmission electron microscopy, and X-ray diffraction. The aerogels as supercritically dried all were X-ray amorphous. At a 5% dopant level, a tetragonal structure with a smaller monoclinic phase developed on thermal exposure. Mixed tetragonal and cubic phases or predominantly cubic materials were observed at higher dopant levels, depending on the dopant level, temperature and exposure time. The formation of crystalline phases was accompanied by loss of surface area and pore volume, although some mesoporous structure was maintained on short-term exposure to 1000°C. Incorporation of the smaller Yb atom into the lattice structure resulted in smaller lattice dimensions on crystallization than was seen with Y doping and favored a more highly equiaxed structure. Aerogels synthesized with 15% Y maintained the smallest particle size without evidence of sintering at 1100°C. Largest shrinkage and loss of pore volume occurred on crystallization from the amorphous phase, with further loss of pores at temperatures above 1000°C attributable to changes in lattice parameters.