Effect of Oxygen Partial Pressure during Sintering on the Microstructure of Mg-PSZ with Strontia and Silica Additions

The microstructure, average grain size, and density of Mg-PSZ sintered with SrO and SiO₂ additions are found to depend on the partial pressure of oxygen in the sintering atmosphere. Over the range of 10⁻¹ to 10° atm, both the average grain size and the density increase with oxygen partial pressure, for a constant SrO/SiO₂ ratio. The partial pressure of oxygen also affects the microstructural distribution of the remnant liquid phase. At high partial pressures the liquid phase is uniformly distributed, whereas at lower oxygen pressures it is preferentially located near the surface. It is proposed that the microstructure produced by sintering is the result of a competition between liquid-phase-enhanced densification and the migration of the liquid phase to the free surface. The migration is attributed to vaporization of MgO from the liquid phase which increases with decreasing partial pressure of oxygen.     

Dynamic averaging and foraging decisions in horses (Equus callabus).

The variability of most environments taxes foraging decisions by increasing the uncertainty of the information available. One solution to the problem is to use dynamic averaging, as do some granivores and carnivores. Arguably, the same strategy could be useful for grazing herbivores, even though their food renews and is more homogeneously distributed. Horses (Equus callabus) were given choices between variable patches after short or long delays. When patch information was current, horses returned to the patch that was recently best, whereas those without current information matched choices to the long-term average values of the patches. These results demonstrate that a grazing species uses dynamic averaging and indicate that, like granivores and carnivores, they can use temporal weighting to optimize foraging decisions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Combined-Stage Sintering Model

By focusing on the similarities between the three stages of sintering, a single equation is derived that quantifies sintering as a continuous process from beginning to end. The microstructure is characterized by two separate parameters representing geometry and scale. The dimensionless geometry parameter, denoted T, comprises five scaling factors that relate specific microstructural featuers (e.g., surface curvature) to the scale (grain diameter). Calculations of T from experimental data show (a) agreement with computer simulations of initial-stage sintering, (b) the effect of surface diffusion on T, and (c) changes in T with microstructural evolution during sintering. Application of the model to the design of firing schedules and the study of microstructural geometry effects on sintering is discussed.     

Isolation of translactone-containing triterpenes with thrombin inhibitory activities from the leaves of Lantana camara

Methanolic extracts prepared from the leaves of Lantana camara have been found to inhibit human thrombin. An assay, in which thrombin activity is measured as a function of clot formation from fibrinogen, was used to guide the fractionation and purification of five principal active constituents (1-5), which were all characterized as 5,5-trans-fused cyclic lactone-containing euphane triterpenes.     

From Sultaniyeh to Tashkent Scrolls: Euclidean Constructions of Two Nine- and Twelve-Pointed Interlocking Star Polygon Designs

In this paper we will explore two nine- and twelvepointed Islamic star polygon patterns consisting of ??nearly regular?? nine-pointed, regular twelve-pointed and irregularly-shaped pentagonal star polygons. The two designs are similar in that they may both be classified mathematically as being p6m patterns with the major star polygons placed in identical locations within each layout; however, the structure of the major stars is quite different. Both of the patterns considered here are of Persian origin. The first design may be found as a repeat unit sketch of the Tashkent Scrolls, and exists as a Timurid-style stone inlay and mosaic tiling in India. The second pattern may be found as Plate 120 of Bourgoin??s Arabic Geometrical Pattern and Design and exists as a stucco/plasterwork ceiling in the Mausoleum of Sultan Oljaytu in Sultaniyeh, Iran, as well as numerous other locations across the Islamic world. Both patterns may be recreated via plausible Euclidean ??point-joining?? constructions (that is, using only the methods available to medieval artisans) in an attempt to ascertain how the original designers of these patterns may have determined the proportion and placement of the stars.     

The haustorium and the chemistry of host recognition in parasitic angiosperms

Two parasitic angiosperms,Agalinis purpurea (Scrophulariaceae) andStriga asiatica (Scrophulariaceae), are compared as to the chemical recognition events involved in host selection.Agalinis is a hemiparasite which can mature to seed-set without a host, whereasStriga is a holoparasite and survives for only a very limited time without a host. Both parasites, however, attach to a host through a specialized organ known as the haustorium and regulate the development of this organ through the recognition of chemical factors from host plants. We now describe the discovery of 2,6-dimethoxy-p-benzoquinone (2,6-DMBQ) as an haustoria-inducing principle fromSorghum root extracts. Our investigation of this compound has led us to suggest that one level of host recognition in these parasitic plants is mediated through their enzymatic digestion of the host root surface. Degradation of surface components liberates quinonoid compounds, such as 2,6-DMBQ, which in turn trigger haustorial development.     

SULFUR RECOVERY WITH REDUCED EMISSIONS, LOW CAPITAL INVESTMENT AND HYDROGEN CO-PRODUCTION

The main disadvantage of the Claus process is that by introducing air as oxidant a large volume of tail gas is produced. This must be treated to reduce atmospheric emissions of sulfur-containing gases. The costs of the tail-gas unit are a significant fraction of the total capital and operating costs for sulfur recovery. A new process uses thermal decomposition of hydrogen sulfide in the presence of carbon dioxide instead of air oxidation. The products of this reaction are hydrogen, carbon monoxide, elemental sulfur, water vapor and carbonyl sulfide. Carbonyl sulfide is easily converted to H₂S and C0₂ by liquid- or vapor-phase hydrolysis. Unreacted H₂S and C0₂ are recovered by absorption and recycled to the reactor. Since no air is introduced, there is no tail gas and the tail-gas unit is eliminated, giving a substantial reduction in capital investment. The concentrations of sulfur-containing gases in the product streams depend only on the operation of the absorber and stripper units and can be controlled to very low levels by increasing stripper boil-up. Process operating costs depend on the level of sulfur recovery required and can also be much lower than those of the modified Claus Process.

The process chemistry depends on a shift in the equilibrium of H₂S decomposition caused by reaction of hydrogen with C0₂ by the reverse of the water-gas-shift reaction. Catalysts for this chemistry have been identified. Reactor conversion is further improved by rapid cooling of the reactor effluent gas. Other aspects of process design and operation confer further advantages with respect to the Claus process; however, the process equipment used is similar to that used in a Claus plant. Retrofit of existing plant to the new technology can therefore be considered.     

Brain mass estimation by head circumference and body mass methods in neonatal glycaemic modelling and control

Introduction

Hyperglycaemia is a common complication of stress and prematurity in extremely low-birth-weight infants. Model-based insulin therapy protocols have the ability to safely improve glycaemic control for this group. Estimating non-insulin-mediated brain glucose uptake by the central nervous system in these models is typically done using population-based body weight models, which may not be ideal.

Method

A head circumference-based model that separately treats small-for-gestational-age (SGA) and appropriate-for-gestational-age (AGA) infants is compared to a body weight model in a retrospective analysis of 48 patients with a median birth weight of 750 g and median gestational age of 25 weeks. Estimated brain mass, model-based insulin sensitivity (S_I) profiles, and projected glycaemic control outcomes are investigated. SGA infants (5) are also analyzed as a separate cohort.

Results

Across the entire cohort, estimated brain mass deviated by a median 10% between models, with a per-patient median difference in S_I of 3.5%. For the SGA group, brain mass deviation was 42%, and per-patient S_I deviation 13.7%. In virtual trials, 87–93% of recommended insulin rates were equal or slightly reduced (Δ < 0.16 mU/h) under the head circumference method, while glycaemic control outcomes showed little change.

Conclusion

The results suggest that body weight methods are not as accurate as head circumference methods. Head circumference-based estimates may offer improved modelling accuracy and a small reduction in insulin administration, particularly for SGA infants.