Fabrication of Covalently Crosslinked and Amine-Reactive Microcapsules by Reactive Layer-by-Layer Assembly of Azlactone-Containing Polymer Multilayers on Sacrificial Microparticle Templates

We report on the fabrication of covalently crosslinked and amine-reactive hollow microcapsules using 'reactive' layer-by-layer assembly to deposit thin polymer films on sacrificial microparticle templates. Our approach is based on the alternating deposition of layers of a synthetic polyamine and a polymer containing reactive azlactone functionality. Multilayered films composed of branched poly(ethylene imine) (BPEI) and poly(2-vinyl-4,4-dimethylazlactone) (PVDMA) were fabricated layer-by-layer on the surfaces of calcium carbonate and glass microparticle templates. After fabrication, these films contained residual azlactone functionality that was accessible for reaction with amine-containing molecules. Dissolution of the calcium carbonate or glass cores using aqueous ethylenediamine tetraacetic acid (EDTA) or hydrofluoric acid (HF), respectively, led to the formation of hollow polymer microcapsules. These microcapsules were robust enough to encapsulate and retain a model macromolecule (FITC-dextran) and were stable for at least 22 hours in high ionic strength environments, in low and high pH solutions, and in several common organic solvents. Significant differences in the behaviors of capsules fabricated on CaCO(3) and glass cores were observed and characterized using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Whereas capsules fabricated on CaCO(3) templates collapsed upon drying, capsules fabricated on glass templates remained rigid and spherical. Characterization using EDS suggested that this latter behavior results, at least in part, from the presence of insoluble metal fluoride salts that are trapped or precipitate within the walls of capsules after etching of the glass cores using HF. Our results demonstrate that the assembly of BPEI/PVDMA films on sacrificial templates can be used to fabricate reactive microcapsules of potential use in a wide range of fields, including catalysis, drug and gene delivery, imaging, and biomedical research.     

Bond line thickness and die tilt inspection in die bonding process

This study focuses upon building an automated inspection system for the in-line measurement of bond-line thickness (BLT) and die tilt in die attachments in the semiconductor packaging process. A prototype of a visual system utilizing the line scan stereo vision technique via two linear CCD cameras has been developed for the die bonding quality inspection. A novel algorithm is proposed for the determination of the 3D coordinates of certain points on an object. The BLT and die tilt of a die attached chip of substrate height 800 μm and cross section 15 × 15 mm² were measured to be approximately 76.8 μm and 0.00094, respectively. The measurement can be completed within one second. Thus the in-line inspection of die bonding quality can be conducted efficiently using the proposed technique.     

Isolation of translactone-containing triterpenes with thrombin inhibitory activities from the leaves of Lantana camara

Methanolic extracts prepared from the leaves of Lantana camara have been found to inhibit human thrombin. An assay, in which thrombin activity is measured as a function of clot formation from fibrinogen, was used to guide the fractionation and purification of five principal active constituents (1-5), which were all characterized as 5,5-trans-fused cyclic lactone-containing euphane triterpenes.