DC04钢板胀形-渐进复合成形锥形件成形能力的实验研究

为了提高渐进成形过程中板料的成形极限和加工效率,提出了胀形-渐进成形的复合成形方法,通过胀形-渐进成形复合成形锥形件实验,研究了DC04钢板胀形-渐进成形复合成形锥形件和纯渐进成形锥形件的成形极限角和应变变化以及壁厚分布规律。结果表明:预成形高度为h=15 mm和h=25 mm时,复合成形零件的成形极限角分别为α极=66°和α极=69°;采用胀形-渐进成形复合成形锥形件,当胀形的最大减薄量发生在局部渐进成形区内,并且胀形和渐进成形的最大减薄量位置方向相反时,锥形件壁厚趋于均匀,提高了胀形-渐进成形的复合成形能力。     

夹钳数量对双曲顶件拉伸成形的影响

利用有限元软件ABAQUS,以双曲顶件为研究对象,建立不同夹钳数量下的拉伸成形有限元模型,分析夹钳数量对板料成形效果的影响.结果表明:拉形力相同时,随着夹钳数量的增加,板料的成形性更好.整体夹钳和5个夹钳拉伸成形的板料均未完全贴模,后者的贴模程度优于前者;10个和15个夹钳的拉伸成形板料完全贴模,后者得到的成形件的应变...     

基于时间序列匹配的过山车定位法

针对过山车难以精准定位的问题,本文提出了一种基于时间序列匹配的过山车定位方法。该方法首先使用动态时间规整(DTW)对惯性测量单元(IMU)的实测与仿真数据进行序列匹配,得到位置估计结果。之后将估计结果作为观测量,在误差状态卡尔曼滤波器(ESKF)中修正IMU预测结果,得到精准的定位结果。为了提高估计结果的准确度,本文提出了分段重组动态时间规整(SRDTW)算法,解决了DTW的匹配失真问题。使用本文方法对过山车进行了定位实验,结果表明,使用Z向加速度和俯仰角进行序列匹配可得到较为准确的估计结果;ESKF滤波后的平均定位误差可达0.24 m,较估计结果的定位误差减小45.6%。     

A Cluster-Based Virtual Cooperative MIMO Transmission Scheme

基于分簇的虚拟协作MIMO传输策略研究

吕红芳

（上海电机学院 电气学院）

中文摘要：

无线传感器网络应用于环境状态监测时,最关键的问题是在无线通信时保障数据传输的可靠性、降低全网的能量消耗。本文提出了一种基于分簇的虚拟协作MIMO传输策略（CVCM）,该方案根据簇头节点到汇聚节点的距离动态配置最佳的协作节点数目和调制速率,保证每个虚拟MIMO单元和汇聚节点的通信能耗最小,从而降低整个网络的能力消耗。仿真实验结果表明,CVCM有效地降低了网络能耗,延长了网络的生命周期,提高了基站接收数据的有效性。

关键词：分簇;虚拟协作MIMO;动态配置;调制速率

     

Structural Basis for the Improved Potency of Peroxisome Proliferator‐Activated Receptor (PPAR) Agonists

The need to develop safer and more effective antidiabetic drugs is essential owing to the growth worldwide of the diabetic population. Targeting the PPAR receptor is one strategy for the treatment of diabetes; the PPAR agonists rosiglitazone and pioglitazone are already on the market. Here we report the identification of a potent PPAR agonist, 15 , whose PPARγ activation was more than 20 times better than that of rosiglitazone. Compound 15 was designed to incorporate an indole head with a carboxylic acid group, and 4‐phenylbenzophenone tail to achieve a PPARγ EC₅₀ of 10 nM . Compound 15 showed the most potent PPARγ agonist activity among the compounds we investigated. To gain molecular insight into the improved potency of 15 , a structural biology study and binding energy calculations were carried out. Superimposition of the X‐ray structures of 15 and agonist 10 revealed that, even though they have the same indole head part, they adopt different conformations. The head part of 15 showed stronger interactions toward PPARγ; this could be due to the presence of the novel tail part 4‐phenylbenzophenone, which could enhance the binding efficiency of 15 to PPARγ.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

PVC/CPE/GF复合材料制备及力学性能

采用玻璃纤维(GF)及氯化聚乙烯(CPE)对聚氯乙烯(PVC)协同增韧改性.研究表明,当共混体系中有一定量的GF时,CPE的加入不仅能够改善共混物的韧性,还能够促进GF在PVC基体中的分散,两者协同增韧.随着CPE加入量的增加,GF分散效果增强,PVC/CPE/GF共混物的硬度呈现先显著增强后缓慢增强的趋势、拉伸强度和...     

碳纳米纤维增强聚甲醛复合材料制备及性能

通过纳米碳纤维(CNFs)在聚甲醛(POM)基体中的均匀分散以及取向,制备了具有优异力学性能和热性能的POM/CNFs复合材料。利用扫描电子显微镜、透射电子显微镜、拉伸性能测试、热重分析、动态热机械分析测试表征了POM/CNFs复合材料的结构和力学、热学性能。结果表明,CNFs与POM分子链形成氢键相互作用,促进了CNFs在POM基体内分散,同时使POM/CNFs复合材料的结晶度显著提高。随着CNFs含量增加,POM/CNFs复合材料的拉伸强度、储能模量和损耗模量均得到提高。当添加0.5%的CNFs时,拉伸强度、储能模量及损耗模量分别提高了20.5%,127%和58%。进一步研究了高温拉伸对POM/CNFs复合材料性能的影响。结果表明,CNFs沿拉伸方向定向排列,同时复合材料拉伸后结晶度提高,拉伸强度显著增加。     

Enhanced strains of Nb-doped BNKT-4ST piezoelectric ceramics via phase boundary and domain design

A strategy that constructs the morphotropic phase boundary and manipulates the domain structure has been used to design the component of 0.96[Bi_0.5(Na_0.84K_0.16)_0.5Ti_(1-x)Nb_xO₃]-0.04SrTiO₃ (BNKT-4ST-100xNb) to enhance the strain properties for actuator application. Non-equivalent Nb⁵⁺ donor doping modulates the phase transition from the mixture of rhombohedral and tetragonal phases to the pseudocubic phase and results in the coexistence of multiple phases. Moreover, the high-resolution TEM confirms the existence of polar nano regions that contribute to the macroscopic relaxor behaviour. The size of the domains is reduced with increasing Nb⁵⁺, resulting in an enhanced relaxor behaviour. The ferroelectric-relaxor transition temperature decreases from 85 to below 30 °C, implying a non-ergodic to ergodic relaxor transition. An improved strain of 0.56% and a giant normalized strain of 1120 pm/V were achieved for BNKT-4ST-1.5Nb, which were attributed to the unique domain structure in which nanodomains are embedded in an undistorted cubic matrix. Ferroelectric, antiferroelectric, and relaxor phases coexist. As the electric field is large enough, a reversible phase transition occurs. Furthermore, good temperature stability was obtained due to the stability of the nanodomains, and no degradation in strains was observed even after 10⁴ cycles, which may originate from the reversible phase transition and dynamic domain wall. The results show that this design strategy offers a reference way to improve the strain behaviour and that BNKT-4ST-100xNb ceramics could be a potential material for high-displacement actuator applications.     

Dynamo在预应力连续箱梁参数化快速建模中应用

近年来,BIM技术在基础设施市政桥梁工程中的应用越来越广泛,使用传统Revit建模方法建模效率低,且模型精度不能达到施工要求,导致相关BIM应用无法达到预期效果.以杭州萧山国际机场三期改扩建项目配套市政桥梁工程为例,通过研究Dynamo节点,编写相关节点对桥梁进行建模,实现了桥梁BIM模型快速高质量的创建,为同类桥梁模...