Earthquake analysis of isotropic asymmetric multistory buildings

Isotropic multistory buildings are the ones characterized by the property: all load‐resisting planar frames have proportional lateral stiffness matrices. In the present paper it is proved that the modal analysis of an N‐story isotropic asymmetric, torsionally coupled, building (a problem of order 3N) can be separated into two independent sub‐problems: (a) a sub‐problem that corresponds to a single‐story asymmetric, torsionally coupled, building (a problem of order 3); and (b) a sub‐problem that corresponds to an N‐story, torsionally uncoupled, planar frame (a problem of order N). It is also demonstrated that the orientation of peak modal seismic forces of the building is independent of the orientation of seismic excitation, which affects only their size. The separation provides a better insight into the structural behavior of asymmetric multistory buildings under earthquake ground motion. Copyright © 2006 John Wiley & Sons, Ltd.     

The Italian national survey of indoor radon exposure

An investigation is being developed by the Camitato Nazionale per la Ricerca e per lo Sviluppo dell'Energia Nucleare e delle Energie Alternative, ENEA, to assess the indoor exposure of the Italian population. The programme, which started in 1982, includes regional and local surveys in all the administrative districts and intensive investigations of factors which influence indoor radon levels. The survey is organized by statistical areas of sampling to obtain representative samples of houses. The definition of the areas takes into account basic parameters e.g. geolithological environments, radon soil gas from underlying soils and rocks, specific activities of local building materials, climatic and seasonal variations, building technology, types of houses and town planning. The collected data may also be used for the compilation of radon risk maps to plan special monitoring and remedial actions if needed. Preliminary results concerning the above items are discussed.     

Buckling of tube-stiffened prolate domes under external water pressure

The paper describes experimental tests carried out on three tube-stiffened prolate hemi-ellipsoidal domes under external water pressure.The tubes were stuck to the internal surfaces of these three domes, in their flanks, and the experimental tests showed that the tubes increased the buckling pressures of these domes, especially in one case, when the tube was subjected to an initial internal pressure.All three domes failed by lobar buckling, in their flanks, and showed buckling resistances much larger than similar unstiffened domes.     

Prediction of the effectiveness of rolling dynamic compaction using artificial neural networks and cone penetration test data

Rolling Dynamic Compaction(RDC),which is a ground improvement technique involving non-circular modules drawn behind a tractor,has provided the construction industry with an improved ground compaction capability,especially with respect to a greater influence depth and a higher speed of compaction,resulting in increased productivity. However,to date,there is no reliable method to predict the effectiveness of RDC in a range of ground conditions. This paper presents a new and unique predictive tool developed by means of artificial neural networks(ANNs) that permits a priori prediction of density improvement resulting from a range of ground improvement projects that employed 4-sided RDC modules;commercially known as"impact rollers". The strong coefficient of correlation(i.e. R0.86) and the parametric behavior achieved in this study indicate that the model is successful in providing reliable predictions of the effectiveness of RDC in various ground conditions.     

On the potential of combining neutron activation analysis and particle induced X-ray emission (PIXE) for micro- and microdistribution analysis of hard metals in human tissues

Tungsten carbide and cobalt are the main components of hard metal alloy while other metals such as chromium, niobium, tantalum, titanium and vanadium are sometimes added in smaller amounts. Exposure to hard metal dusts can induce a lung fibrosis with cobalt playing a major role. In order to provide information on the role that each metal may have in causing this disease, determination of the total content and the distribution of inhaled metals in lung tissue of hard metal workers is of paramount importance. However, samples such as transbronchial biopsy and bronchoalveolar lavage (BAL), often used in the medical diagnosis of pneumoconiosis, only allow for a small amount of material. This calls for sensitive and accurate analytical procedures for microdetermination and distribution of metals in pulmonary tissue and cellular material, such as macrophages. This work proposes a combination of sophisticated analytical techniques such as neutron activation analysis (NAA), currently applied to the determination of the total concentration of more than 30 elements in biological specimens, and PIXE analysis, particularly microPIXE, which has a great potential for microdistribution analysis in small biological samples. Principles and perspectives for the combined use of these techniques for the analysis of human tissue are outlined and discussed. NAA: determination of hard metals in lung tissue are carried out by neutron irradiation (2 × 10¹⁴ neutrons cm⁻² s⁻¹) in the HFR reactor of Petten. After neutron activation, radiochemical separations of ⁶⁰Co, ¹⁸⁷W, ¹⁸²Ta, ⁵¹Cr followed by computer-based high resolution gamma ray spectrometry allow the measurement of these elements in pulmonary tissues with sensitivities ranging from 10⁻⁴ μg (Cr) to 10⁻⁶ μg (W). PIXE: this technique is multielemental and of relatively high sensitivity (μg/g) even in small total sample masses of from 10 to 100 μg, thus allowing the analysis of parts of needle biopsies. Whereas PIXE has been successfully applied to many medical problems, its usefulness is limited in the total samples analysis for cobalt-related hard metal disease, due to the low levels of cobalt in tissue combined with severe element interferences from the generally more abundant metal, iron. Nevertheless, microPIXE, a special variety of the method scanning over the sample with a focussed ion beam of about 2 × 2 μm², could complement the NAA findings in total samples in the sense of achieving a microdistribution analysis of hard metals (including cobalt) in suitable thin tissue sections.The availability of specialized facilities at the JRC such as the powerful HFR reactor (Petten), the NAA laboratories (Ispra) and the microPIXE facility (Geel) could represent a European ‘reference pole’ for the study of metals in tissues of hard metal diseased subjects.     

Separation of physical loading from photosynthesis/respiration processes in rivers by mass balance

Diurnal variations in physical and chemical concentrations, including nutrients, are observed in river ecosystems. Understanding these cycles and separating the effects of physical loading (from point and non-point sources) and biogeochemical processes are necessary for water management and the TMDL process. A chloride mass balance approach is used to separate the relative influences of physical loading and biogeochemical processes in the Bow River through Calgary, Canada, which has a significant influence on the river water chemistry. Sampling campaigns were conducted in December 2005, when minimal photosynthesis and respiration occur, and in July 2006, when river discharge is high and some photosynthesis and respiration activity is present. Samples in each campaign were collected at point source input and output along the river reach through the city every hour for a 24-hour period, allowing for time of travel. The two wastewater treatment facilities within the city contributed the majority of physical mass loading to the river, with temporal variations in effluent discharge, chloride, and nutrient concentrations. Wastewater effluent chloride to nutrient (as well as other parameter relationships) concentrations also varied diurnally. An hourly chloride mass balance was achieved, within 0.5% (average, S.D.=4.4) for December and 7.7% (average, S.D.=4.2) for July, between estimated cumulative sum values from all inputs and measured values at the river output downgradient of the city, allowing for the investigation of other parameter conservativeness. Some slight diurnal variations associated with photosynthesis and respiration were observed even with limited productivity in the river. Nitrate mass fluxes appeared to be most strongly influenced by photosynthesis and respiration processes, with phosphate being less influenced. Ammonia mass fluxes appeared to be most strongly influenced by wastewater effluent loading. Physical loading can mask or enhance biogeochemical diurnal fluctuations, creating errors in river process interpretations. Chloride was a useful tracer in the mass balance to distinguish between and assist in separating physical loading and biogeochemical processes in the river.     

Energy and environmental comparison of three variants of a family house during its whole life span

The aim of this study is to analyse and compare three variants of a family house in order to evaluate the total environmental impacts produced during the whole building life cycle. The first variant corresponds to the standard in force in Switzerland, the second alternative to the requirements of a quality control label for houses with low energy consumption and the third case is a very low energy consumption building. The three variants have the same architectural aspect but different insulation thicknesses and types, different energy production systems and the use of different renewable energies. The calculation of the environmental impacts is carried out by means of a life cycle analysis, which includes not only the impact related to the energy consumption during the occupancy stage, but also the materials manufacture, transport, replacement and elimination at the end of the building lifetime. The results are expressed with the Swiss and the UCTE (Union for the Co-ordination of Transmission of Electricity) electricity mix to analyse how they influence the building impact.     

Interaction of bacteriophage R17 and reovirus type III with the clay mineral allophane

A study has been made of the adsorption of bacteriophage R17 and reovirus type 3 by the amorphous aluminosilicate clay mineral allophane. In agreement with previous studies of virus adsorption to other minerals such as montmorillonite and aluminium hydroxide, the principal factors influencing adsorption were found to be mixing time, pH and the concentrations and isoelectric points of both the virus and the absorbent. However, allophane was found to be a much better adsorbent for reovirus and R17 over the pH range 5–7, the natural pH range of many fresh waters.By using highly purified radioactive reovirus it was possible to follow both the distribution of radioactive virus in a clay suspension and the specific infectivity of the virus. This study revealed that when adsorbed virus was eluted by neutral phosphate solutions it retained its physical integrity but was of a lower specific infectivity.     

Geochemistry of some rare earth elements in groundwater,Vierlingsbeek, The Netherlands

Groundwater samples were taken from seven bore holes at depths ranging from 2 to 41m nearby drinking water pumping station Vierlingsbeek, The Netherlands and analysed for Y, La, Ce, Pr, Nd, Sm and Eu. Shale-normalized patterns were generally flat and showed that the observed rare earth elements (REE) were probably of natural origin. In the shallow groundwaters the REEs were light REE (LREE) enriched, probably caused by binding of LREEs to colloids. To improve understanding of the behaviour of the REE, two approaches were used: calculations of the speciation and a statistical approach.For the speciation calculations, complexation and precipitation reactions including inorganic and dissolved organic carbon (DOC) compounds, were taken into account. The REE speciation showed REE(3+), REE(SO(4))(+), REE(CO(3))(+) and REE(DOC) being the major species. Dissolution of pure REE precipitates and REE-enriched solid phases did not account for the observed REEs in groundwater. Regulation of REE concentrations by adsorption-desorption processes to Fe(III)(OH)(3) and Al(OH)(3) minerals, which were calculated to be present in nearly all groundwaters, is a probable explanation.The statistical approach (multiple linear regression) showed that pH is by far the most significant groundwater characteristic which contributes to the variation in REE concentrations. Also DOC, SO(4), Fe and Al contributed significantly, although to a much lesser extent, to the variation in REE concentrations. This is in line with the calculated REE-species in solution and REE-adsorption to iron and aluminium (hydr)oxides. Regression equations including only pH, were derived to predict REE concentrations in groundwater. External validation showed that these regression equations were reasonably successful to predict REE concentrations of groundwater of another drinking water pumping station in quite different region of The Netherlands.