热激励硅谐振式微结构压力传感器若干关键参数设计

针对一种以方形硅膜片为一次敏感元件、硅梁为二次谐振敏感元件的热激励硅微结构压力传感器的实际结构,分析了其工作机理和产生热特性的机制.给出了考虑热特性情况时的传感器的被测压力与输出频率的特性方程;给出了传感器稳定可靠工作的条件;给出了梁谐振子的几何结构参数和激励、拾振电阻几何参数选择与位置设置的原则.     

新一代智能城域光网络

本提出了一种标准化的光控制平面。阐明了开了用于光传输网的控制平面所遇到的选择与挑战。光控制平面被分解成邻居发现、服务发现、连接控制和拓扑、资源发现等几个基本的过程。不同的网络组织和分割导致了几个不同的自动配置模型：软性持久链路模型、用户接口模型和对等模型。这是构成以IP为中心的光传输网的控制和管理基础。同时也介绍了基于SDH光交换的新一代CIENA公司智能光网络，它具有大容量光交换能力和网络拓扑结构自动发现、端对端电路配置、带宽动态分配等功能及特点，将大大提高数据、电路业务的服务质量，新一代智能光网络是干线和城域网络交换传输最佳的选择。     

再造鼓形膨胀器

介绍了本钢不停产安装再造煤气管道鼓形膨胀器的实践，并对制造、安装方法进行了叙述，特别是在结构上采用了独特的构槽密封焊缝和完整的安装程序，保证了实施的安全。     

广义准正则格形码距离谱的计算

本文讨论了格形码距离谱的计算问题，定义了度量空间意义下的广义准正则格形码，对具有Ｉｍａｉ与Ｈｉｒａｋａｗａ［２］和Ｕｎｇｅｒｂｏｅｃｋ［３］定义的典型的时不变网格结构的广义准正则格形码，证明了其距离谱可用全零信息序列对应的码字进行计算。在理论上推广了Ｍ．Ｒｏｕａｎｃｅ与Ｄ．Ｊ．Ｃｏｓｔｅｌｏ的结果，解决了非平方欧几里德度量意义下一类ＴＣＭ信号序列的距离谱计算问题     

Supplementation of coconut oil from different sources to the diet induces cellular damage and rapid changes in fatty acid composition of chick liver and hepatic mitochondria

PURPOSE OF THE STUDY: Impaction in pertrochanteric fracture sites is a well known phenomenon; the screw-plate system is designed to stabilise the fracture. Although easier to use, the risk with the nail-plate system is postoperative penetration of the nail into the joint. The present study was conducted to determine the exact conditions of the impaction, and to identify possible ways to improve the nail-plate system. MATERIAL-METHOD: The study included 129 cases of pertrochanteric fracture, excluding sub-trochanteric fractures. All fractures were fixed with a 130 degrees angulated nail-plate. In all cases, consolidation was uneventful after 8 to a 12 weeks. The anatomical type of fracture, i.e. stable or unstable, was determined according to the size of the intermediary fragment, including the trochanter minor. The displacement was measured as the difference between the length of the nail and the length of the femoral head and neck measured along the axis of the femoral neck. The parameters examined were: fracture stability degree, bony mineralisation (Singh Index), nail length, femoral neck, length nail position in the femoral head, and above all, fracture reduction. All these parameters were computerised and compared using Stat View statistics software. RESULTS: Impaction was observed in 43 per cent of cases. Among these, 25 per cent were rated as slight (1 to 5 mm), 18 per cent as moderate (over 5 mm) and 9 per cent as marked (10 to 25 mm). Impaction was associated with demineralisation of the bone tissue (p = 0.001). The anatomical classification of the fracture was not a determining factor (p = 0.19), as marked displacements were also recorded in stable fractures. A posterior and inferior position of the intramedullary nail in the femoral head is one of displacement determining factors (p = 0.004, two-sided 1 test). Valgus over-correction is the most important factor, especially when it is associated with bony demineralisation (p = 0.02) and an inadequately centred intramedullary pin (p = 0.02). Shorter the femoral neck, and shorter the nail, greater was the frequency of nail articular penetration. DISCUSSION: The risk of articular penetration therefore reaches 15 per cent in petrochanteric fractures repaired with a nail plate, set at an angle of 130 degrees. A short neck, a cervicodiaphyseal angle superior to 140 degrees, and demineralisation are the three determining parameters. Stable or unstable fracture has in fact little effect on displacement incidence, and therefore does not, on its own, warrant the use of a prosthesis in comminuted fractures. The authors compared their results to literature on progressive sliding system: the incidence of complications associated with this type of fracture treatment is identical, but the determining parameters are different. CONCLUSION: The study shows that the nail-plate is efficient and provides simple and solid fracture fixation. However, this osteosynthesis material needs to be modified in order to improve its fixation in the femoral head.     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

Microbiologic depuration of Anadara tuberculosa (Mollusca: Arcidae)

In Costa Rica the mollusk Anadara tuberculosa represents a risk for human health due to the contamination of the growing waters and the fact that its is consumed raw. The families depending on the income obtained through commercialization of these animals have a low education and economic status. Therefore, it is of great importance to develop and evaluate simple methods of depuration that could be easily used by these families to make these mollusks safe for consumption. Bottles containing 11 of saline solution (25g/l) were prepared in duplicates to test the bactericidal effect of acetic acid. The solution in each bottle was adjusted to ph 4.5, 5.0 or 5.5 or held at ph of 7.0 or 8.0 for the controls. The solution in each bottle was then inoculated with approximately 1 X 104 cfu/ml of coliforms. Counts of coliforms were determined for each bottle 0, 1, 2, 4 and 8 hours after inoculation. For the depuration studies, specimens with diameters ranging from 4.0 to 4.5 cm were collected from a harvester at the estuary of Puntarenas, Gulf of Nicoya. Fifty specimens each were depurated in separate tanks containing 25 1 of oxygenated saline solution adjusted with acetic acid to an initial ph of 4.5 (treatment) or non adjusted ph of 8.0 (control). Counts of Enterobacteriaceae were determined, in duplicates, every 12 hr for 48 hr. An additional fifty animals were depurated using the defined method and tested to determine if they met international standards of microbiological quality for aerobic plate count, Enterobacteriaceae count, Escherichia coli count and presence of Salmonella. A sensory evaluation using a triangle test was performed to compare a typical dish prepared with depurated or non-depurated animals. A significant coliform reduction was determined in a saline solution (25 g/l) at a pH range of 4.5 to 5.5. This reduction, during 8 hr, was higher in the acid treatments compared to the controls. During depuration, the elimination of Enterobacteriaceae bacteria was faster when acetic was used (initial ph = 4.5) than when it was not. This elimination was more important the first 24 hr, time defined as adequate for the application of the method. The method has the advantage of transforming the bivalve in a product that is safe for human consumption, since it guarantees that the international standards of microbiological quality, for raw and depurated mollusks, are reached. On the other hand, the sensory qualities of a typical dish prepared with depurated animals are not affected by the method, which can be easily implemented and applied by the people that work in the extraction of this mollusk.     

动态聚焦电子枪的模拟与实验研究

动态聚焦技术是为了满足大屏幕高分辨率彩色显像管及高分辨率彩色显示管的发展需求而产生的一项新技术。在本文中，作者首先提出了一种动态聚焦电子枪结构，进行了数值计算与分析，制作了动态聚焦电子枪并装管实验。通过对实验样管的测试与分析。证实该枪性能良好，动态聚集效果明显。     

康山金矿地质地球化学特征及其成因

康山金矿产在豫西熊耳山古隆起区的结晶基底太华群和盖层中元古界熊耳群地层接触界面附近，矿体严格受构造破碎蚀变带控制。流体包裹体，稳定同位素等研究表明，成矿物质来自太华群变质岩，成矿流体的性质与变质热液截然不同，而与花岗岩浆热液相近似。该矿床的形成与燕山期发生的同构造－花岗岩浆期热液活动有关，金沉淀成矿阶段有大气水的混入。