An attempt to predict pork drip loss from pH and colour measurements or near infrared spectra using artificial neural networks

The ability to predict meat drip loss by using either near infrared spectra (SPECTRA) or different meat quality (MQ) measurements, such as pH₂₄, Minolta L^∗, a^∗, b^∗, along with different chemometric approach, was investigated. Back propagation (BP) and counter propagation (CP) artificial neural networks (ANN) were used and compared to PLS (partial least squares) regression. Prediction models were created either by using MQ measurements or by using NIR spectral data as independent predictive variables. The analysis consisted of 312 samples of longissimus dorsi muscle. Data were split into training and test set using 2D Kohonen map. The error of drip loss prediction was similar for ANN (2.2–2.6%) and PLS models (2.2–2.5%) and it was higher for SPECTRA (2.5–2.6%) than for MQ (2.2–2.3%) based models. Nevertheless, the SPECTRA based models gave reasonable prediction errors and due to their simplicity of data acquisition represent an acceptable alternative to classical meat quality based models.     

Microstructure and dislocation density evolutions in MgAlZn alloy processed by severe plastic deformation

Commercial MgAlZn alloy AZ31 was processed by hot extrusion and equal channel angular pressing (ECAP) known as EX-ECAP. Microstructure and defect structure evolution with strain due to ECAP were investigated by TEM, positron annihilation spectroscopy (PAS), and X-ray diffraction. Significant grain refinement was obtained by EX-ECAP. In the extruded condition relatively low density of dislocations was determined by PAS. Sharp increase of dislocation density occurred during the first two passes of ECAP, followed by the saturation and even a decline manifesting the dynamic recovery at higher strains. XRD line profile analysis confirmed the results of PAS with slightly higher values of dislocation densities in individual conditions. Detailed analysis of contrast factors allows to determine the type of dislocations and to draw conclusions about slip activation and its variations with strain. The influence of microstructure evolution on mechanical properties is discussed.     

Bioactive glass–ceramic coated titanium implants prepared by electrophoretic deposition

Surface modification of Ti alloys towards an improved osteoinductive behaviour is one of the major challenges in orthopaedic implant technology nowadays. One way to achieve this is by applying a bioactive coating which can increase the rate of osseointegration and chemical bonding of surrounding bone to the implant. In the present work, the production of a bioactive glass–ceramic coating on flat Ti alloys by electrophoretic deposition is demonstrated. The coatings are applied by cathodic deposition from non-aqueous suspensions followed by sintering in vacuum, avoiding uncontrolled oxidation of the Ti substrates. The use of non-aqueous suspensions both allowed to reduce the deposition time and yielded homogeneous coatings with a uniform thickness of 8 μm. Evaluation of the coating adhesion confirmed the good mechanical performance of the coatings with a tensile bond strength of 41.0 ± 11.1 MPa. Additionally, a feasibility study demonstrated the potential of electrophoretic deposition as a coating technique for commercial complex implants.     

High-Field Magnetization Study of [Cu(pyz)2(HF2)]PF6: An S=\frac{1}{2} Quasi-two-dimensional Heisenberg Magnet

We report on pulsed-field magnetization studies of the quasi-two-dimensional spin system [Cu(pyz)₂(HF₂)]PF₆. The magnetization saturates at $B_{C}^{ab}=37.5$  T and $B_{C}^{c}=33.8$  T for in-plane and out-of-plane orientations of the applied magnetic field, respectively. In addition, the angular dependence of the g-factor studied by electron-spin resonance reveals orbital overlap in the ab plane suggesting a quasi-two-dimensional square-lattice network of Cu spins. It is argued that the high-field behavior is governed by the two-dimensional nature of the spin correlations due to the large anisotropy of the exchange couplings.     

Knockdown of apoptosis-inducing factor disrupts function of respiratory complex

Recent findings suggest that apoptotic protein apoptosis-inducing factor (AIF) may also play an important non-apoptotic function inside mitochondria. AIF was proposed to be an important component of respiratory chain complex I that is the major producer of superoxide radical. The possible role of AIF is still controversial. Superoxide production could be used as a valuable measure of complex I function, because the majority of superoxide is produced there. Therefore, we employed superoxide-specific mitochondrial fluorescence dye for detection of superoxide production. We studied an impact of AIF knockdown on function of mitochondrial complex I by analyzing superoxide production in selected cell lines. Our results show that tumoral telomerase-positive (TP) AIF knockdown cell lines display significant increase in superoxide production in comparison to control cells, while a non-tumoral cell line and tumoral telomerase-negative cell lines with alternative lengthening of telomeres (ALT) show a decrease in superoxide production. According to these results, we can conclude that AIF knockdown disrupts function of complex I and therefore increases the superoxide production in mitochondria. The distinct effect of AIF depletion in various cell lines could result from recently discovered activity of telomerase in mitochondria of TP cancer cells, but this hypothesis needs further investigation     

Changes in the composition of hop secondary metabolites induced by high hydrostatic pressure

Hops contain large amounts of secondary metabolites, many of which have notable bioactive and sensory characteristics. Many of these properties are affected by the processing of raw hops into products. We studied the influence of high‐pressure processing (HPP) on the content and composition of secondary metabolites in hop homogenates prepared from fresh green cones of several Czech hop varieties. Homogenates contained more hop oils (27% on average) compared to dried hops. The composition of essential oils in homogenates after HPP showed a decrease in fatty acid methyl and thioesters fractions (80 and 100% respectively). Conversely, the number of other bioactive compounds from the group of resins and prenylflavonoids that remained in HPP homogenates was retained to a greater extent than in the dried hops. Low temperatures and an oxygen‐free atmosphere were effective conditions for the preservation of raw hops and hop products. Copyright © 2018 The Institute of Brewing & Distilling     

Hydrogen gas sensing properties of WO3 sputter-deposited thin films enhanced by on-top deposited CuO nanoclusters

Magnetron-based gas aggregation cluster source (GAS) was used to prepare high-purity CuO (cupric oxide) nanoclusters on top of sputter-deposited thin film of tungsten trioxide (WO₃). The material was assembled as a conductometric hydrogen gas sensor and its response was tested and evaluated. It is demonstrated that addition of CuO clusters noticeably enhances the sensitivity of the pure WO₃ thin film. With an increasing amount of CuO clusters the sensitivity of CuO/WO₃ system rises further. When CuO clusters form a sufficiently thick and compact layer, the resistance response is reversed. Based on the sensorial behavior, conventional and near-ambient pressure X-Ray photoemission spectroscopies, and resistivity measurements, we propose that the sensing mechanism is based on the formation of nano-sized p-n junctions in between p-type CuO and n-type WO₃. The advantages of the GAS technique for preparing sensorial and/or catalytically active materials are emphasized.     

Thermometry in Normal Liquid 3He Using a Quartz Tuning Fork Viscometer

We have developed the use of quartz tuning forks for thermometry in normal liquid ³He. We have used a standard 32 kHz tuning fork to measure the viscosity of liquid ³He over a wide temperature range, 6 mK<T<1.8 K, at SVP. For thermometry above 40 mK we used a calibrated ruthenium oxide resistor. At lower temperatures we used vibrating wire thermometry. Our data compare well with previous viscosity measurements, and we give a simple empirical formula which fits the viscosity data over the full temperature range. We discuss how tuning forks can be used as convenient thermometers in this range of temperatures with just a single parameter needed for calibration.     

Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films

LaNiO₃ thin films were successfully prepared by a chemical method from citrate precursors. The LNO precursor solution was spin‐coated onto Si (100) and Si (111) substrates. To obtain epitaxial or highly oriented films, the deposited layers were slowly heated in a gradient thermal field, with a heating rate of 1° min^?1, and annealed at 700°C. The influence of different substrate orientations on the thin film morphology was investigated using atomic force microscopy and X‐ray diffraction analysis. Well‐crystallized films with grains aligned along a certain direction were obtained on both substrates. Films deposited on both substrates were very smooth, but with a different grain size and shape depending on the crystal orientation. Films deposited on Si (100) grew in the (110) direction and had elongated grains, whereas those on Si (111) grew in the (211) direction and had a quasi‐square grain shape.