Model updating based on incomplete modal data

The objective of model updating is to improve the accuracy of a dynamic model based on the correlation between the measured data and the analytical (finite element) model. In this paper, we intend to update the mass and stiffness matrices of an analytical model when only modal frequencies or spatially incomplete modal data are available. While the proposed method is systematic in nature, it also preserves the initial configuration of the analytical model, and physical equality and/or inequality constraints ...     

Removing coarse sediment by sorting of reservoirs

Reservoir sedimentation is an unsolved problem.In this paper,based on measured data,theoretical analysis and numerical computations,we prove that a proportion of the sediment coarser than 0.1 mm(CS) is sorted and deposited in specific reaches in the upper backwaters or in run-of-river reservoirs.The ratio of CS is usually small but it impacts the slope of deposition delta greatly and raises the backwater in later stages for a river shaped reservoir(RSR).Based on these facts,we propose to remove such CS from...     

沿空巷破碎煤体自燃耗氧及升温特征数值模拟

为研究巷道顶煤和煤柱破碎后由漏风引起的自燃耗氧及升温规律,在质量、动量和热量守恒模型的基础上利用FLUENT软件求解了沿空巷周围破碎煤体的稳态氧气分布和温度的动态变化过程。计算结果表明：在煤柱较完整的情况下,顶煤的氧气浓度分布高于煤柱,但二者都具有自然发火的危险。由于散热作用,高温区离二者的漏风边界都有一定的距离,顶煤升温速率较煤柱更快。在改变漏风强度后,高温区位置和范围也会随之改变。此研究结论可以帮助缩小现场火源区的寻找范围,以便及时采取措施抑制自燃。     

Two Modes and Criterion of Brittle Fracture

The plastic zone at the tip of the flaw (including acute cark and common notch) was investigated. Forthe notch specimen, a formula of toughness K was proposed, and its physical meaning was emphasized.Twomodes of brittle fracture was identified and the evaluating criterion was established.     

Two Algorithms for Fast Polyhedron Ray-Tracing

ＴｗｏＡｌｇｏｒｉｔｈｍｓｆｏｒＦａｓｔＰｏｌｙｈｅｄｒｏｎＲａｙ－ＴｒａｃｉｎｇＺｈａｎｇＱｉａｎＳｈｉＪｉａｏｙｉｎｇＣａｉＨｏｎｇＣＡＤ＆ＣＧＳｔａｔｅＫｅｙＬａｂ．，ＺｈｅｊｉａｎｇＵｎｉｖｅｒｓｉｔｙ，３１００２７ＦｏｓｈａｎＥｎｔｅｒｐｒ...     

基于组件特征模型的产品布局设计

本文将产品的布在布局设计过程视为一个组件特征的 布局演化过程，提出了基于组件特征模型的产品布局设计方法，并进行了实例验证。     

REBa_2Cu_3O_(7-δ)系超导体的磁矩效应

本文研究了HoBa_2Cu_3O_(7-δ)系氧化物陶瓷超导体的生成工艺;着重探讨了磁场成形及磁场烧结对RE(RE=Y,Ho)Ba_2Cu_3O_(7-δ)系氧化物超导体的取向及超导性能的影响;并借助于X—ray衍射分析和SEM分析,从金属离子外层电子状态对结果进行了探讨、分析。     

数字电路平行故障模拟方法的研究与实现

本文用平行的方法实现了对数字电路的故障模拟。对于组合电路,通过引入敏感输入的概念,大大提高了算法的实现效率。对于时序电路,通过将触发器展开成基本门的形式,在门级描述的基础上实现了故障模拟。本文最后给出了对十个电路例子(ISCAS Benchmark Cicuits)的模拟结果。这种故障模拟方法的研究对提高测试产生的效率有一定的帮助。     

利用零井源距VSP资料进行品质因子反演

品质因子Q值是描述地震波衰减的一个重要物理参数,它描述了介质非完全弹性特征,是地层内部本质特征,所以研究和估算Q值在地震勘探中的作用越来越重要。谱比法和质心频移法是现在常用的两种方法。本文详细介绍了两种方法的原理并用无噪声理论模型验证了两种方法的可行性。反演结果显示在无噪声的条件下两种方法都能很好地估算介质的品质因子。通过对含有不同强度噪声的理论数据、全波场理论数据和实际零井源距VSP数据的处理,对两种方法进行了比较。结果表明,质心频移法反演的结果比谱比法更精确、更可信。