Enhanced Bioavailability of Eicosapentaenoic Acid from Fish Oil After Encapsulation Within Plant Spore Exines as Microcapsules

Benefits of eicosapentaenoic acid (EPA) can be enhanced by raising their bioavailability through microencapsulation. Pollen can be emptied to form hollow shells, known as exines, and then used to encapsulate material, such as oils in a dry powder form. Six healthy volunteers ingested 4.6 g of fish oil containing 20% EPA in the form of ethyl ester first alone and then as 1:1 microencapsulated powder of exines and fish oil. Serum bioavailability of EPA was measured by area under curve (AUC_0–24). The mean AUC_0–24 of EPA from ethyl ester with exine (M = 19.7, SD = 4.3) was significantly higher than ethyl ester without exines (M = 2, SD = 1.4, p < 0.01).The bioavailability of EPA is enhanced by encapsulation by pollen exines.     

Microstructure Effects in Multidipped Tin Oxide Films

Porous ultrafine tin oxide films (particle size 70–90 Å) have been prepared from tin alkoxide by dip coating. The influence of the number of coating applications on the thickness, microstructure, and electrical properties of multidipped tin oxide films was investigated. With an increase in the number of coating applications, the porosity of the multidipped films decreased from 60% to 12%, but the particle size of the films increased. The resistivity of the films decreased from 5.5 × 10^–2 to 5.7 × 10^–3Ω·cm with increasing the number of coating applications from 1 to 10. This tendency of the resistivity to decrease is due to the microstructural change of the films with the number of coating applications. The microstructure, the surface structure, and the composition of the multidipped films were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Auger electron spectroscopy (AES).     

Pore conductivity control at the hundred-nanometer scale: an experimental and theoretical study

We report on the observation of an unexpected mechanism that controls conductivity at the 100-nm scale on track-etched polycarbonate membranes. Transport measurements of positively charged methyl viologen performed by absorption spectroscopy under various pH conditions demonstrate that for 100-nm-diameter pores at pH 2 conductivity is blocked, while at pH 5 the ions move through the membrane according to diffusion laws. An oppositely charged molecular ion, naphthalene disulfonate, in the same membrane, shows the opposite trend: diffusion of the negative ion at pH 2 and very low conductivity at pH 5. The influence of parameters such as ionic strength and membrane surface coating are also investigated. A theoretical study of the system shows that at the 100-nm scale the magnitude of the electric field in the vicinity of the pores is too small to account for the experimental observations; rather, it is the surface trapping of the mobile ion (Cl- or Na+) that gives rise to the observed control of the conductivity. This surprising effect has potential applications for high-throughput separation of large molecules and bio-organisms.     

Evanescent wave cavity ringdown spectroscopy: a platform for the study of supported lipid bilayers

Evanescent wave cavity ringdown spectroscopy (EW-CRDS) is advocated as an approach for monitoring the formation of supported lipid bilayers (SLBs) on quartz substrates in situ and for the quantitative study of fast molecular adsorption kinetics at the resulting modified biomimetic surface. This approach is illustrated using SLBs of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP). Complementary atomic force microscopy (AFM) and quartz crystal microbalance with dissipation (QCM-D) measurements confirm the formation of bilayers on quartz. The subsequent interaction of the porphyrin, 5,10,15,20-tetraphenyl-21H,23H-porphine-p,p',p',p'-tetrasulfonic acid tetrasodium hydrate (TPPS) with the cationic bilayer-modified silica surface has been studied using EW-CRDS combined with an impinging-jet to deliver analyte to the surface in a well-defined manner. The adsorption of TPPS to the bilayer was kinetically controlled and the adsorption rate constant was found to be 1.7 (±0.6) × 10(-4) cm s(-1) from finite element modeling of the jet hydrodynamics and associated convective-diffusion equation, coupled to a first-order surface process describing adsorption. These proof-of-concept studies provide a platform for the investigation of molecular processes at biomembranes using EW-CRDS for chemical species showing optical absorbance in the visible and ultraviolet range.     

Low energy electron excited nanoscale luminescence spectroscopy of erbium doped AIN

We have investigated the optical activity of Er³⁺ ions in AlN via depth-resolved, (5 nm to 250 nm), low energy electron-excited nanoscale (LEEN) luminescence spectroscopy and compared it with the luminescence of an Er-free AlN film. For the Er-free film, there was no emission in the IR from the AlN at any depth, and at higher energies we measured only a broad, weak feature between 1.7–3.25 eV along with an O defect related feature at 3.8 eV, which is significantly enhanced toward the surface. We found strong emission in the AlN:Er films from the first excited → ground state transition of Er³⁺ at 0.80 eV along with many other excited state transitions, although the features are broad compared to those of GaN:Er. The AlN:Er luminescence saturates near a concentration of 10²¹ cm⁻³, at which point we also observe enhanced O defect related luminescence uniformly distributed throughout the film. This finding suggests a role for O in activating the Er at low Er concentrations, while inhibiting the Er activity at high O concentrations.     

Estimating suspended sediment concentrations in turbid coastal waters of the Santa Barbara Channel with SeaWiFS

A technique is presented for estimating suspended sediment concentrations of turbid coastal waters with remotely sensed multi-spectral data. The method improves upon many standard techniques, since it incorporates analyses of multiple wavelength bands (four for Sea-viewing Wide Field of view Sensor (SeaWiFS)) and a nonlinear calibration, which produce highly accurate results (expected errors are approximately ±10%). Further, potential errors produced by erroneous atmospheric calibration in excessively turbid waters and influences of dissolved organic materials, chlorophyll pigments and atmospheric aerosols are limited by a dark pixel subtraction and removal of the violet to blue wavelength bands. Results are presented for the Santa Barbara Channel, California where suspended sediment concentrations ranged from 0–200+ mg?l^?1 (±20?mg?l^?1) immediately after large river runoff events. The largest plumes were observed 10–30?km off the coast and occurred immediately following large El Niño winter floods.     

Predicting Mechanical Strength of In-Use Firefighter Protective Clothing Using Near-Infrared Spectroscopy

The exact lifespan of in-use firefighter protective clothing is difficult to predict due to the large variations in use between individual garments. Furthermore, testing methods used to evaluate new protective clothing are destructive in nature and could not be applied to in-use garments. Various non-destructive techniques have been proposed for the evaluation of in-use clothing, each possessing its own advantages and disadvantages. The ability of near-infrared spectroscopy to predict the tensile strength of thermally aged fabrics used in protective clothing for wildland firefighters and other workers is investigated here. Fabrics were exposed to heat fluxes from 10 kW/m² to 40 kW/m² for various durations using the cone calorimeter, after which the tensile strength of the fabrics was measured. Temperatures measured during the exposures and results of thermal gravimetric analysis tests were used to interpret changes in tensile strength. Multivariate linear regression was used to develop correlations between the tensile strength and the reflectance values measured between 1500 nm and 2500 nm for new and thermally aged fabrics. It was found that models based on reflectance measurements made at as few as three wavelengths could be used to estimate the tensile strength of the thermally aged specimens.     

Intra-storm variability in microbial partitioning and microbial loading rates

Association with particles in the water column can have a significant impact on microbial fate and transport. This study analyzed multiple stormwater samples taken throughout the duration of three separate storms (at two different sites) to evaluate the fraction of microbes partitioning to denser "settleable" particles and to examine how partitioning behavior varied over the course of a storm. Intra-storm sampling also allowed for estimates of microbial loading rates (both total and particle-associated) and cumulative storm-induced microbial load. Five different indicator organisms were examined, with the fraction of microbes associated with settleable particles assessed via a calibrated centrifugation method. Partitioning behavior varied across microorganism type, with an average of 40% of fecal coliforms, Escherichia coli, and enterococci associating with settleable particles, compared to approximately 65% of Clostridium perfringens spores and only 13% of total coliphage. Partitioning remained fairly constant for each type of organism throughout storm events. Nonetheless, higher concentrations of both settleable particles and microbes entering the water column soon after the onset of a storm led to higher loading rates of settleable microbes in the storm's earliest stages, a trend that could have important implications for the design of stormwater management structures (e.g., detention basins). Estimates of cumulative storm-induced microbial loading suggested that one day's worth of storm loading can be the equivalent of months, or even years, of dry-weather loading.     

Microbial partitioning to settleable particles in stormwater

The degree to which microbes in the water column associate with settleable particles has important implications for microbial transport in receiving waters, as well as for microbial removal via sedimentation (i.e. detention basins). The partitioning behavior of several bacterial, protozoan and viral indicator organisms is explored in three urban streams under both storm and dry weather conditions. The fraction of organisms associated with settleable particles in stormwater is estimated through use of a centrifugation technique which is calibrated using suspensions of standard particles (e.g., glass, latex). The fraction of organisms associated with settleable particles varies by type of microbe, and the partitioning behavior of each organism generally changes between dry weather and storm conditions. Bacterial indicator organisms (fecal coliforms, Escherichia coli, enterococci) exhibited relatively consistent behavior, with an average of 20-35% of organisms associated with these particles in background samples and 30-55% in storm samples. Clostridium perfringens spores exhibited the highest average level of particle association, with storm values varying from 50% to 70%. Results related to total coliphage partitioning were more variable, with 20-60% associated with particles during storms. These estimates should be valuable in surface water quality modeling efforts, many of which currently assume that all microbes exist as free (unattached) organisms.     

The influence of electron momentum on the shape of backscatter peaks in gamma-ray spectrometers

The shape and intensity of backscatter peaks in pulse-height spectra have a complicated dependence on details of detector design, gamma-ray energy and geometry. In addition they show a remarkably strong systematic dependence on the atomic number of the scattering material and even manifest specifically solid state effects. The external backscatter peak can be regarded as a weighted composite of Compton profiles with an unexploited potential for revealing small changes in the electron momentum spectra of the scattering material. Its sensitivity in this role could be improved by the use of detectors with very thick depletion layers and by a redesign of the coldfinger to diminish the internal backscatter peak. By reduction of the source energy and the use of a small absorber post, the system evolves into a new type of Compton-profile spectrometer of outstanding efficiency and small dimensions.