Novel Polymorphic Microsatellite Loci for the Korean Black Scraper (Thamnaconus modestus), and Their Application to the Genetic Characterization of Wild and Farmed Populations

In this study, we developed 20 polymorphic microsatellite markers for the Korean black scraper, Thamnaconus modestus (Günther, 1877), Monacanthidae, and used them to compare allelic variation between wild and hatchery populations in Korea. All loci were readily amplified and demonstrated allelic variability, with the number of alleles ranging from 5-35 in the wild population and 5-22 in the farmed population. The average observed and expected heterozygosities were estimated, respectively, as 0.74 and 0.80 in the hatchery samples and 0.78 and 0.81 in the wild ones. These results indicate lower genetic variability in the hatchery population than in the wild population and minor, but significant, genetic differentiation between the two populations (F(ST) = 0.005, P < 0.01). Additionally, cross-amplification was tested in another monacanthid species, Stephanolepis cirrhifer; many loci were found that yielded useful information. The high degree of polymorphism exhibited by the 20 microsatellites will be useful in future aquaculture and population genetic studies for developing conservation and management plans.     

Photoluminescence measurements on undoped CdZnTe grown by the high-pressure bridgman method

The low temperature photoluminescence of Cd_0.91Zn_0.09Te grown by the high-pressure Bridgman (HPB) method exhibits a neutral donor bound exciton emission (D⁰X) at 1.65603 eV with its excited state (D⁰X^*) at 1.65798 eV and neutral acceptor bound exciton emissions (A⁰X) at 1.64566 eV and 1.65201 eV. Assuming a direct generation and subsequent relaxation of excitons at the D⁰X^* state, we demonstrate that the temporal evolution of the above emission bands is well reproduced by a set of rate equations. The resultant radiative-lifetime of 1.4 ns for the D⁰X and 1.5 and 2.0 ns for the A⁰Xs are compared with various CdZnTe's (CZTs) grown by the other methods to demonstrate the particular nature of the HPB CZT.     

Mercury distribution in two Sierran forest and one desert sagebrush steppe ecosystems and the effects of fire

Mercury (Hg) concentration, reservoir mass, and Hg reservoir size were determined for vegetation components, litter, and mineral soil for two Sierran forest sites and one desert sagebrush steppe site. Mercury was found to be held primarily in the mineral soil (maximum depth of 60 to 100 cm), which contained more than 90% of the total ecosystem reservoir. However, Hg in foliage, bark, and litter plays a more dominant role in Hg cycling than the mineral soil. Mercury partitioning into ecosystem components at the Sierran forest sites was similar to that observed for other US forest sites. Vegetation and litter Hg reservoirs were significantly smaller in the sagebrush steppe system because of lower biomass. Data collected from these ecosystems after wildfire and prescribed burns showed a significant decrease in the Hg pool from certain reservoirs. No loss from mineral soil was observed for the study areas but data from fire severity points suggested that Hg in the upper few millimeters of surface soil may be volatilized due to exposure to elevated temperatures. Comparison of data from burned and unburned plots suggested that the only significant source of atmospheric Hg from the prescribed burn was combustion of litter. Differences in unburned versus burned Hg reservoirs at the forest wildfire site demonstrated that drastic reduction in the litter and above ground live biomass Hg reservoirs after burning had occurred. Sagebrush and litter were absent in the burned plots after a wildfire suggesting that both reservoirs were released during the fire. Mercury emissions due to fire from the forest prescribed burn, forest wildfire, and sagebrush steppe wildfire sites were roughly estimated at 2.0 to 5.1, 2.2 to 4.9, and 0.36+/-0.13 g ha(-1), respectively, with litter and vegetation being the most important sources.     

Introduction of sulfhydryl groups and disulfide linkage to mungbean 8Sα globulin and effects on physicochemical and functional properties

Sulfhydryl groups and disulfide bond were introduced in mungbean's major storage protein, 8Sα globulin, by protein engineering to improve structural stability and functional properties. Five modified proteins or mutants (F59C, I99C, A213C, one free sulfhydryl group; I99C/A213, one disulfide bridge; F59C/I99C/A213C, one free sulfhydryl group and one disulfide linkage) were expressed in Escherichia coli at a yield similar to that of the unmodified protein or wild type (WT) in soluble form (38%). The number of introduced groups in the mutants was confirmed by Ellman analysis. Mutant and WT proteins exhibited similar elution patterns on gel filtration indicating their trimeric native conformation. Mutants had 2 to 3.8 °C higher T_m values than WT and were digested by chymotrypsin at 52–58% in 60 min but exhibited different digestion patterns. All mutants showed greater hardness of heat-induced gels than WT, especially I99C/A213C and F59C/I99C/A213C. Results indicate the improved structural stability of the modified 8Sα globulin.     

Component-based robot system design for grasping tasks

The paper presents a robot system design with highly reusable components for a component-based robot system for manipulation tasks. The robot system is designed based on the analysis of manipulation tasks using a unified modeling language use case diagram. For a service robot with locomotion and manipulation mechanisms, reusability of robot system components is improved by adopting the proposed design. Our structure consists of scenario, task, robot information management server, data analyzer, sensor hardware controller, skill, and motion hardware controller on a component-based robot system. Based on the proposed robot system, we implemented a component-based robot system and subsequently realized a grasping motion by a service robot.     

Centrifugal Filter for Aerosol Collection

Air filters collect particles by the mechanical collection mechanisms, namely, inertia, interception, gravitational settling, and Brownian diffusion. There exists the most penetrating particle size (MPPS) in submicron size range for which none of the collection mechanisms work effectively. In this study, we propose a new type of filter named as “centrifugal filter,” which collects aerosol particles by centrifugal force together with the conventional mechanical collection mechanisms. The centrifugal filter proposed in the present work may be rotated by a motor or compressed air. Air passes through the filter in the axial direction of filter rotation. The filter rotates so does the air embedded in the filter, and therefore centrifugal force exerts on particles. In addition to the mechanical collection mechanisms, small migration of particles due to the centrifugal force enhanced the collection efficiency of submicron particles significantly without increasing the pressure drop. The performance tests of centrifugal filter were conducted by changing the fiber diameter, the air flow velocity and the rotation speed. We found that the collection efficiency of filter is enhanced significantly by rotating the filter without increasing the pressure drop and that the filter efficiency is well predicted by the conventional filtration theory accounting for the centrifugal force.

Copyright 2015 American Association for Aerosol Research     

Evaluation of mixing profiles for a new micromixer design strategy

The relationship between mixing history and reaction performance in microreactors using computational fluid dynamics (CFD) simulations is identified. In the idealized, simplified mixing model, mixing proceeds linearly and only the mixing time determined the reaction performance. However, in the case of realistic models where mixing proceeds unequally, the partial rapid progression of mixing, more than the mixing time, significantly impacts the reaction. The use of the fluid segment size distribution to capture this effect is proposed. The effective Damköhler number derived from the fluid segment size distribution predicted the reaction yield well. To demonstrate the utility of the mixing profile design strategy, we fabricated a novel micromixer with multiple partial rapid mixing zones. This micromixer achieved excellent results both in a CFD simulation and an experiment. © 2015 American Institute of Chemical Engineers AIChE J, 62: 1154–1161, 2016     

Melt viscosity and flow birefringence of polycarbonate

Melt viscosity and flow birefringence of bisphenol A-type polycarbonate were measured and analyzed by the application of rubber-like photoelastic theory. The melt viscosity in the Newtonian flow region increased with the molecular weight to the power of 3.4. In polycarbonate, the shear stress of the Newtonian flow region was to 10⁶ dyn/cm², whereas in PMMA it was at most 3 = 10⁵ dyn/cm². The flow birefringence δn has a linear relation with shear stress S, that is δn = 5.7 × 10^?10 S. The principal polarization difference of flow unit α₁ – α₂ was 1.62 × 10^?23 cm³, which was obtained by the application of the rubber-like elastic theory. In PMMA, it was 3.9 = 10^?25 cm³; about 1/40 of that was polycarbonate. The anisotropy of polarizability of the flow unit of polycarbonate was also about 40 times larger than that of PMMA. So the anisotropy reflected the large flow birefringence of the polycarbonate.     

Sieving of aerosol particles with metal screens

Metal screens with uniform micrometer-sized opening were employed to sieve aerosol particles by suppressing the adhesion of particles smaller than the openings. The collection efficiencies of monodispersed polystyrene latex (PSL) particles were experimentally determined using the metal screens with 1.2, 1.8, 2.5, and 4.2 μm openings at various filtration velocities. The particles smaller than the mesh opening adhered on the metal screen at a low filtration velocity, but the bounce-off of particles on the mesh surface suppressed the adhesion at a high velocity. As a result, we found that the adhesion of PSL particles larger than 0.3 μm mostly suppressed at a filtration velocity higher than 10 m s^?1 and therefore we can sieve aerosol particles according to the opening size of metal screens. We also found that the particle number concentration could be determined by measuring the increase in pressure drop since the clogging of metal screen openings takes place by the individual particles.

© 2016 American Association for Aerosol Research