Antimicrobial properties of 1‐monoacylglycerols prepared from undecanoic (C11:0) and undecenoic (C11:1) acid

Antimicrobial activity of monoacylglycerols (MAG) with odd number of carbons prepared from undecanoic (MAG C11:0) and undecenoic (MAG C11:1) was investigated. Data showed that both studied substances successfully inhibited Gram‐positive cocci (Staphylococcus aureus) and spore‐forming rods (Bacillus cereus). Gram‐negative bacteria were highly resistant against MAG C11:0 and showed considerable tolerance against MAG C11:1. Minimum inhibitory concentration (MIC) of MAG C11:1 was possible to determine for Escherichia coli only. Complete inhibition of three fungi genera (Alternaria, Cladosporium, Trichothecium) was achieved using MAG C11:1 with a concentration higher than 750 µg/mL. The growth of Aspergillus niger, Mucor racemosus, Phoma, Scopulariopsis, Trichoderma was significantly reduced. Generally, MAG C11:1 was more efficient than MAG C11:0 against all tested microorganisms. Due to a rich production of degradation enzymes, some fungi species surprisingly adapted their metabolism during growth and were even able to utilise tested MAG as a source of carbon. Practical applications: MAG composed of fatty acids with odd number of carbons in molecule are a promising group of substances applicable in food industry and cosmetics. They represent materials with broad spectrum of antimicrobial activity, especially against Gram‐positive bacteria. More efficient MAG C11:1 with a double bond in molecule can be recommended for reduction of S. aureus that cause food enterotoxicosis.     

Aerosol Synthesis and Characterization of Ultrafine Fullerene Particles

Abstract

Aerosol routes were used to produce fullerene particles in the nanometer size range. Particle formation mechanisms at processing temperatures of 400-700°C were studied by measuring particle number and mass size distributions in the gas phase by a differential mobility analyzer and a low-pressure impactor respectively. Subsequently, the foils of the impactor onto which fullerene particles were collected were examined by HPLC.     

Abrasive and Adhesive Wear Behavior of Arc-Evaporated Al<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Cr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>N Hard Coatings

During the last decade, the usage of difficult-to-machine materials such as austenitic stainless steels has increased continuously in various industrial applications. Tools such as blind hole taps, punches, or deep drawing molds are often exposed to severe wear while machining/forming these materials, mainly due to excessive adhesion and material transfer. On combination with abrasive wear due to work-hardened wear debris, tool lifetime in these applications is often limited. In this study, ball-on-disc experiments were carried out with arc-evaporated AlCrN coatings with different Al/(Al + Cr) ratios against Al₂O₃ and austenitic stainless steel balls in ambient atmosphere. Test temperatures of 25, 500, and 700°C were chosen for the hard Al₂O₃ balls simulating severe abrasive loads, whereas 25, 150, and 250°C were used for the softer stainless steel material to evaluate the adhesive wear behavior. Characterization of the wear tracks was done by scanning electron microscopy in combination with energy-dispersive X-ray analysis and optical profilometry. The best abrasive wear resistance during testing against Al₂O₃ was observed for the coating with the highest Al content. In the case of the austenitic stainless steel balls, sticking of the ball material to the coating surface was the dominating wear mechanism. The influence of test temperature, chemical composition, and surface roughness was studied in detail.     

在等截面杆中采用EC3-1-1中算法的数值有效性分析

欧洲规范3的第1-1节中提出了用于计算结构构件侧向和侧向扭转屈曲的一般方法,主要采用Merchant-Rankine经验公式求解平面内和平面外效应。应用了梁元、壳元理论和欧洲规范3中基于欧洲屈曲曲线图集的其他方法,模拟了等截面杆的轴压、弯曲及压弯组合作用的加载情况,对第1-1节中推荐方法的安全性进行了评估。从具有不同长细比的柱和梁中推导出了计算方程。同时也对横截面形状、加载类型、长细比和钢材等级等进行了参数研究。结果表明:提出的计算方法也能与欧洲规范3第1-1节中的条款6·3·1至6·3·3中提出的方法具有相似的安全性。     

Advanced performance evaluation of a reverse osmosis treatment for oilfield produced water aiming reuse

Technology advancements and the increasing need for fresh water resources have created the potential for desalination of oil field brine (produced water) to be a cost-effective fresh water resource for beneficial reuse. At the mature oil and gas production areas in the northeast of Brazil, the majority of wells produce a substantial amount of water in comparison with oil production (more than 90%). At these fields, the produced water has to be treated on site only for oil and solids removal aiming re-injection. The aim of this work is to assess the quality of the produced water stream after a reverse osmosis desalination process in terms of physicochemical characteristics influencing reuse of the water for irrigation or other beneficial uses.     

Systematic organophilization of montmorillonite: The impact thereof on the rheometric and mechanical characteristics of NBR and SBR based nanocomposites

Different montmorillonites either, completely hydrophilic (Mont‐0), amphiphilic (Mont‐25, Mont‐50, and Mont‐75) or completely hydrophobic (Mont‐100) were used as reinforcing fillers for styrene butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) individually to predict the influence of the different forms on the properties of the rubbers (rheometric characteristics and mechanical properties). The shifts in the glass transition temperatures after the clay insertion were determined from dynamic mechanical thermal analysis to investigate the preference and action of each form. In addition, the storage moduli were used as indications to the corresponding mechanical properties of the samples. The influences could be followed after comparing the impacts of aging conditions on the properties of rubber compositions. The obtained data may provide a platform to suggest the mechanism by which these forms can in some cases act as compatibilizers in addition to their reinforcing/plasticizing effect when employed with the physically incompatible NBR/SBR (50/50) blend, which helps to optimize the properties of nanocomposites based on these blends. The proposed mechanism of action showed good correlation with the results of the mechanical properties and x‐ray diffraction investigations as well. POLYM. ENG. SCI., 54:942–948, 2014. © 2013 Society of Plastics Engineers     

Chemical characterisation of marine aerosol at Amsterdam Island during the austral summer of 2006–2007

Atmospheric aerosols were collected in separate fine (<2.5 μm) and coarse (>2.5 μm) size fractions in the period December 2006–March 2007 at Amsterdam Island in the southern Indian Ocean. A major objective of the study was to assess biogenic impact on the marine aerosol. The samples were analysed for organic carbon, water-soluble organic carbon, major inorganic ionic species, and organic species, including methanesulphonate (MSA), dicarboxylic acids, and organosulphates. The concentrations of sea salt, non-sea-salt sulphate, and water-soluble and water-insoluble organic matter (WSOM and WIOM) were estimated. Sea salt dominated the composition of the aerosol and accounted for 83% and 91% of the sum of the mass of the four aerosol types in the fine and coarse size fractions, respectively. WSOM, which can serve as a proxy for biogenic secondary organic aerosol (SOA), accounted for only 2.8% of the sum of the mass of the four aerosol types in the fine size fraction. MSA was the dominating organic compound with a median concentration of 47 ng m^?3. The organosulphates were characterised as sulphate esters of hydroxyl acids and a dihydroxylaldehyde, which may originate from the oxidation of algal/bacterial unsaturated fatty acid residues. No evidence was found for isoprene SOA.     

Statistical evaluation of the lateral-torsional buckling resistance of steel I-beams, Part 1: Variability of the Eurocode 3 resistance model

The EN version of part 1-1 of EC3 introduces significant changes in the evaluation of the lateral-torsional buckling resistance of unrestrained beams, as well as alternative design procedures. Simultaneously, as a part of the preparation of the National Annexes of EC3 part 1-1 and the establishment of the corresponding NDP’s (Nationally Determined Parameters) it becomes necessary to define the partial safety coefficients for the bending resistance of beams when lateral-torsional buckling is a potential failure mode. In this paper the methodology for the resistance evaluation of beams subjected to instability is briefly described and the results are compared with FEM numerical results for the same elements. Subsequently, to assess the accuracy of the alternative design formulae, a statistical analysis of the results is performed on the basis of EN 1990-Annex D. A methodology is proposed for the evaluation of the design procedures allowing for the uncertainties in the resistance model. Results are presented for a wide set of beam geometries and loading cases and a proposal for the definition of the partial safety factor γ_rd is presented for the various methods, in line with the target failure probability of EN 1990.     

Consumers’ quality perception of national branded, national store branded, and imported store branded beef

This study investigated the differences in the consumers’ quality perception of national branded, national store branded, and imported store branded beef. Partial Least Squares analysis is used for modelling the quality perception process. Results show that consumers perceived national branded Carnalentejana beef, as better on all quality cues and quality aspects than the other two store branded beefs. Preference for Carnalentejana beef stayed highly consistent even after the blind test, where consumers differentiated this beef from the other two beef brands on all sensory dimensions: taste, tenderness, and juiciness, and chose it as the preferred one. Consumers utilized more perceived intrinsic cues to infer expected eating quality of store branded beefs.