Bicycle messengers: energy expenditure and exposure to air pollution

The purpose of the study was to determine the level of energy expenditure and exposure to air pollution for bicycle messengers. Relationships between heart rate (HR) and oxygen uptake, and between HR and pulmonary ventilation (VE) for each participant were established in laboratory tests. Air pollution and HR were measured during one working day. The total oxygen uptake was then described as the total energy expenditure in Joule (J) and in multiples of the energy expenditure at rest (MET). The mean energy expenditure during a working day (8 h) was 12 MJ, (4.8 MET). The level of air pollution exposure when cycling seemed to be comparable with the levels of exposure when sitting inside a vehicle. The VE during cycling was four times higher than resting value. Increased VE led to increased exposure to air pollution.     

经济的板对线连接方案——单排电缆连接器系统

更拥经济、节省空间但仍能提供高性能是许多现代电子系统所需求的板对线连接方案，间距1.27毫米的双排连接器（SMC）及板对板的连接被证明是个很好的选择。单排电缆MiniBridge连接器系统可用于非常致密和高要求的应用。[编按]     

Fast and accurate 4‐node quadrilateral

An accurate and variationally consistent 4‐node quadrilateral element is introduced where high coarse mesh accuracy and low mesh distortion sensitivity are characteristic qualities, even when incompressibility is approached for plane strain. One‐point quadrature integration procedure is adopted and a new improved stabilization technique is developed. Orthogonality conditions are utilized so that the patch test is satisfied for arbitrary quadrilaterals. Several numerical examples including a convergence rate study are presented which confirm the excellent performance of this element. Copyright © 2004 John Wiley & Sons, Ltd.     

Adsorption of antifouling booster biocides on metal oxide nanoparticles: Effect of different metal oxides and solvents

Controlling the release rate of biocides (antifouling agents) from a paint coating is a key issue for the development of multi-season antifouling marine coatings. One promising approach is the use of nanoparticles onto which biocides are adsorbed to prevent premature depletion of the biocide. Adsorption of one novel (Medetomidine) and six commercially available and widely used antifouling biocides (Chlorothalonile, Dichlofluanid, Diuron, Irgarol, Seanine, Tolylfluanid) onto oxide nanoparticles (Al₂O₃, CuO, MgO, SiO₂, TiO₂, ZnO) was investigated by HPLC and NMR in different organic solvents. Large differences in adsorption strength depending on the type of nanoparticle and solvent employed were observed. It was shown that nanoparticles coordinate preferentially with the imidazole moiety of Medetomidine. Independent of the type of particle this interaction was considerably stronger in comparison to the other biocides. However, the interaction strength was strongly dependant on the type of solvent, where the largest strongest interaction was achieved in o-xylene. In addition field tests were performed where a considerable decrease in release rate was displayed from coatings containing Medetomidine adsorbed to nanoparticles compared to coatings containing Medetomidine as single additive.     

Effect of high temperature heat treatment on intergranular corrosion of AlMgSi(Cu) model alloy

Copper containing 6000-series aluminium alloys may become susceptible to intergranular corrosion (IGC) as a result of improper thermomechanical processing. Effect of cooling rate after solution heat treatment on the corrosion behaviour of a model AlMgSi(Cu) alloy of nominal composition (wt%) 0.6 Mg, 0.6 Si, 0.2 Fe, 0.2 Mn and 0.1 Cu was investigated. Slow cooling rates were simulated by isothermal treatment for predetermined times in lower temperature baths immediately after solution heat treatment. Treatment for 10-100 s at temperatures below 400 °C introduced susceptibility to IGC. Longer heat treatment at the same temperatures introduced susceptibility to pitting. A corrosion resistant time zone was found between the zones of IGC and pitting at temperatures lower than 350 °C. Quenching in water after solution heat treatment prevented IGC. IGC was related to microgalvanic coupling between the noble Q-phase (Al₄Mg₈Si₇Cu₂) grain boundary precipitates and the adjacent depleted zone. Pitting was attributed to coarse particles in the matrix. Possible mechanisms causing the corrosion resistant intermediate zone are discussed. The results indicate possible methods for obtaining increased corrosion resistance of similar alloys by proper thermal processing.     

Effect of Silver Loading on the Lean NOx Reduction with Methanol Over Ag–Al2O3

The influence of silver loading on the lean NO_x reduction activity using methanol as reductant has been studied for alumina supported silver catalysts. In general, increasing the silver loading (0–3 wt%), in Ag–Al₂O₃, shifts or extends the activity window, for lean NO_x reduction towards lower temperatures. In particular Ag–Al₂O₃ with 3 wt% silver is active for NO_x reduction under methanol-SCR conditions in a broad temperature interval (200–500 °C), with high activity in the low temperature range (maximum around 300 °C) typical for exhaust gases from diesel and other lean burn engines. Furthermore, increasing the C/N molar ratio enhances the reduction of NO_x. However, too high C/N ratios results in poor selectivity to N₂.     

Extended studies of degradation mechanisms in the refractory lining of a rotary kiln for iron ore pellet production

Changes, over a period of 8 years, in the chemical composition and morphology of deposit and lining materials in a production rotary kiln for iron ore pellet manufacture are described. The following have been studied: two types of refractory brick used as lining material; deposited chunk materials from the lining; the interaction zones between deposits and linings. Morphological changes at the deposit/lining interface, and the active chemical reactions, are established. Larger hematite grains in the deposit material (5–50 μm) primarily remain at the original deposit/lining interface. The remainder penetrates fissures, voids and brick joints, forms a laminar structure with corundum from the bricks, and migrates in grains in the lining material. Potassium penetrates more deeply into the bricks than hematite, resulting in the formation of kalsilite, leucite and potassium β-alumina, which contribute to degradation of the lining.