Fuzzy fault tolerant predictive control for a diesel engine air path

This paper proposes a Fuzzy Fault Tolerant Predictive Control (FFTPC) with integral action method for a class of nonlinear systems. The Takagi-Sugeno (T-S) fuzzy approach is introduced as a modelling technique in order to consider the active control methods adapted to linear models. The proposed control strategy is based on a combination between Parallel Distributed Compensation (PDC) control law and Model Predictive Control (MPC) where the T-S fuzzy aspect uses the Unmeasurable Premise Variables (UPV). A T-S fuzzy observer provides an L2 norm estimation of system state vector and faults. The controller and observer gains are obtained by solving Linear Matrix Inequalities (LMIs) derived from the Lyapunov theory. The validity of the proposed Fault Tolerant Control (FTC) strategy is illustrated through an application to a Diesel Engine Air Path (DEAP) system.     

Intracellular behaviour of samarium and europium in lactating mammary gland

The subcellular localization of samarium and europium, two rare-earths, increasingly used in both medical and industrial fields, has been studied in several organs such as liver and kidney but never in the mammary gland despite of its importance in the biology of lactation and nutrition domains. The intracellular behaviour of samarium and europium after their intra-peritoneal administration in the lactating mammary gland cells was investigated. The results showed the presence of very electron dense deposits in the glandular epithelial cell lysosomes. These particular lysosomes were never observed in the mammary cell lysosomes of control rats. These intralysosomal deposits were probably composed of insoluble samarium or europium phosphates by analogy with previous studies, the transmission electron microscopy, the ion mass microscopy and the electron probe microanalysis, and other techniques allowing the identification of the chemical structure of the intralysosomal deposits.     

Three-dimensional modelling of manufacturing tolerancing using the ascendant approach

This paper proposes a three-dimensional approach towards manufacturing tolerancing that uses a strategy to strictly consider the definition of a datum system imposed by ISO standards. This approach, called three-dimensional manufacturing tolerancing (TMT), is based on the small displacement torsor, which describes the possible deviations between machined surfaces and nominal surfaces of the part model. Every requirement of the definition drawing is treated separately with its own calculation model. The iterative ascending analysis allows one to establish the influence of the most recent phase and determine the influential parameters from previous phases. The nominal part model is defined on the datum systems of the requirement, and deviations are expressed with respect to both the machining process and the chosen machine adjustment method. The result takes the form of a formula that yields the variation in characteristics specified in the requirement based on quantifiable parameters identified on the machine.     

Stabilization of refined olive oil by enrichment with chlorophyll pigments extracted from Chemlali olive leaves

This paper presents the first investigation on the effect of enrichment refined olive oil by chlorophyll pigment extracted from Chemlali olive leaves during storage (6 months). The changes that occurred in the quality indices, fatty acids, sterol, and phenolic content were investigated during the storage of refined olive oil under RT (20°C) and accelerated conditions (50°C) in the dark. Additionally, the pigments (chlorophyll and carotene) changes during 6 months of oil storage were evaluated. At the end of the storage, more than 90% of chlorophyll pigments decomposed in all samples, while, carotene pigment loss was lower showing up to 60 and 85% loss for oil stored at 20 and 50°C, respectively, at the end of storage. The reduction of total phenolic compounds exhibited similar degradation profiles, being reduced by 5% and up to 60% for the enriched refined olive oil stored at 20 and 50°C in 6 months, respectively. In the fatty acid composition, an increase in oleic acid and a decrease in linoleic and linolenic acids were less significant in enriched than non‐enriched refined olive oil. On the other hand, sterol composition was less affected by storage in enriched oil samples. However, the sterol concentration of the oil samples showed an increase in β‐sitosterol, 24‐methylene cholesterol, stigmasterol, and a decrease in cholesterol, Δ5, 24‐stigmastadienol percentage at the end of storage. Based on the Rancimat method, the oils with added leaf pigment extract had the lowest peroxide value and the highest stability. After 6 months of storage, the oxidative resistance of refined olive oil fell to 0.2 and to zero for enriched refined olive oil stored at 20 and 50°C, respectively.     

Twin-Screw Extrusion Processing of Distillers Dried Grains with Solubles (DDGS)-Based Yellow Perch (<Emphasis Type="Italic">Perca flavescens</Emphasis>) Feeds

Increases in global aquaculture production, compounded with limited availabilities of fish meal for fish feed, has created the need for alternative protein sources. Twin-screw extrusion studies were performed to investigate the production of nutritionally balanced feeds for juvenile yellow perch (Perca flavescens). Five isocaloric (~3.06 kcal/g) ingredient blends, adjusted to a target protein content of 36.7% db, were formulated with 0%, 10%, 20%, 30%, and 40% distillers dried grains with solubles (DDGS) at an initial moisture content of 5–7% db, with appropriate amounts of fish meal, fish oil, whole wheat flour, corn gluten meal, and vitamin and mineral premixes. During processing, varying amounts of steam (6.9–9.7 kg/h) were injected into the conditioner and water (6.7–13.1 kg/h) into the extruder to modulate the cohesiveness of the final extrudates. Extrusion cooking was performed at 226–298 rpm using a 1.9 mm die. Mass flow rate and processing temperatures generally decreased with progressively higher DDGS content. Moisture content, water activity, unit density, bulk density, expansion ratio, compressive strength and modulus, pellet durability index, water stability, angle of repose, and color were extensively analyzed to quantify the effects of varying DDGS content on the physical properties of the final extrudates. Significant differences (P < 0.05) among the blends were observed for color and bulk density for both the raw and extruded material, respectively, and for the unit density of the extruded product. There were also significant changes in brightness (L), redness (a), and yellowness (b) among the final products when increasing the DDGS content of the blends. Expansion ratio and compressive strength of the extrudates were low. On the other hand, all extruded diets resulted in very good water stability properties and nearly all blends achieved high pellet durability indices. In summary, each of the ingredient blends resulted in viable extrudates.     

Damage characterization of a cross-ply carbon fiber/epoxy laminate by an optical measurement of the displacement field

Using Electronic Speckle Pattern Interferometry (ESPI), full-field displacement measurement was performed on the edge of a cracked cross-ply graphite/epoxy laminate subjected to a tensile loading. The displacement jumps corresponding to cracks are clearly visible and can be used to determine the crack opening displacement (COD) values along the cracks. The main objective of this study is to determine if the application of successive loads of increasing magnitude may have modified the existing cracks and thereby changed the COD dependence on the applied stress. Moreover, we have tested the applicability of the assumed linear elastic COD behavior in the presence of very high stress concentration at the crack tips. The profile of the opening along the crack was also studied.     

Auto‐management of energy in IoT networks

Wireless sensor network (WSN) based on IEEE 802.15.4 technology continues to gain considerable importance. The present work is based on this standard and a cluster tree network topology. This network is divided into many subgroups, each of which is characterized by its special IEEE parameters (beacon order [BO] and superframe order [SO]). A mathematical model for computing energy consumption was proposed to enable personal area network (PAN) coordinator to detect the current energy level in the battery. The proposed adaptive intervention is based on a comparison between the remaining energy and the diverse thresholds, which lead to an auto‐management of energy consumption. The proposed approach was evaluated using Inetmanet/Omnet++ simulator.