Investigation of electrochromic properties of poly(3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene)

Electropolymerization of 3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene BMPhDTT, having strong electron-donating methoxy groups, was performed, utilizing potentiodynamic method. The homopolymer was characterized by cyclic voltammetry (CV), Fourier transform infrared (FTIR) and UV–vis spectroscopy. Spectroelectrochemical and electrochromic properties of the homopolymer film were investigated and a PBMPhDTT/PEDOT device was constructed to understand its characteristics in detail. It was revealed that the potential range of 0.0–2.0 V is suitable for operating the device between yellow and blue colors. It indicated a good open circuit memory and stability.     

Productivity and costs in the course of timber transportation with the Koller K300 cable system in Turkey

This study was carried out on very steep and difficult terrain. Whole trees were logged uphill to the forest road by a Koller K300 cable crane. Investigations were carried out by time studies for which the repetition time measurement method was selected. Through time studies, the productivity and cost of the Koller cable system were evaluated.     

Sn diffusion coefficient and activation energy determined by way of XRD measurement and evaluation of micromechanical properties of Sn diffused YBa2Cu3O7−x superconducting ceramics

This study manifests not only the effect of Sn diffusion on physical, electrical, mechanical, structural and superconducting properties of the bulk YBa₂Cu₃O_7?x (Y123) superconductors prepared by the conventional solid-state reaction route by use of electrical resistance, X-ray diffraction analysis (XRD), electron dispersive X-ray, scanning electron microscopy, transport critical current density (J _c ) and Vickers microhardness (H _v ) measurements but also the diffusion coefficient and the activation energy of tin (Sn) in the Y123 material for the first time. The diffusion coefficient and the activation energy of Sn are investigated in the temperature range 500–945 °C using the change of the lattice parameters extracted from the XRD patterns. The resistance (at room temperature), critical (onset and offset) temperature, variation of critical temperature, hole-carrier concentration, crystallinity, lattice parameter, texturing, surface morphology, lotgering index, element distribution, critical current density, oxygen content, load dependent microhardness, elastic modulus and yield strength values are obtained for the pure and Sn diffused samples and compared with each other. One can see that all superconducting parameters given above depend sensitively on the Sn diffusion on Y123 system. The obtained results exhibit that the room temperature resistance enhances with the Sn diffusion because of the hole filling when the onset $ (T_{c}^{onset} ) $ ( T c onset ) and offset $ (T_{c}^{offset} ) $ ( T c offset ) critical temperatures are obtained to be about 93.4 and 89.6 K for the pure sample as against 92.2 and 88.1 K for the Sn diffused sample, respectively. This may be attributed to the fact that the decrement in the critical temperatures is due to the deterioration of crystallinity and descend in the grain size. As for the critical current density measurements, J _c values are obtained to be about 125.4–65.3 A/cm², respectively, for the undiffused and Sn diffused materials. This may be led to the decrease of the flux pinning mechanism stemming from the stacking faults, planar and micro-defects. At the same time, XRD measurements display that the samples produced in this work exhibit the polycrystalline superconducting phase with the changing intensity of diffraction lines. Besides, the peak intensities belonging to major phase (Y123) decrease monotonously with Sn diffusion in the system; however, new peaks belonging to the minor (BaCuO₂) phases start to appear for Sn diffused sample confirming both the reduction of the grain size and degradation of the critical temperature. Moreover, the pure sample is confirmed by both enhancement of a and b lattice constants and the decrement of the cell parameter c of the sample in comparison with that of the Sn diffused sample. According to SEM examination, the crystallinity and grain connectivity suppress with the Sn diffusion. EDX measurements illustrate that not only do the elements used for the preparation of the Y123 superconductors with and without Sn diffusion distribute homogeneously but also the level of Cu element reduces with the Sn diffusion, presenting that the Cu²⁺ ions may partly be diffused by tetravalent tin (Sn⁴⁺) ions. Further, surprising results of the Vickers microhardness values demonstrate that the pure sample visualizes Indentation Size Effect (ISE) feature; however, the Sn diffused sample reports Reverse Indentation Size Effect (RISE) nature. Additionally, the diffusion coefficient is observed to increase from 1.11 × 10^?9 to 2.82 × 10^?8 cm² s^?1 as the diffusion-annealing temperature increases, verifying that the Sn diffusion at lower temperatures is much less significant as compared to the higher ones. Temperature dependence of the Sn diffusion coefficient and activation energy in the range of 500–945 °C is defined with the aid of the following equation: $$ D = 7.78 \times 10^{ - 6} { \exp }\left[ {\left( {( - 0.590 \pm 0.005){\raise0.7ex\hbox{${\text{eV}}$} \!\mathord{\left/ {\vphantom {{\text{eV}} {k_{B} T}}}\right.\kern-0pt} \!\lower0.7ex\hbox{${k_{B} T}$}}} \right)} \right] $$ D = 7.78 × 10 ? 6 exp [ ( ( ? 0.590 ± 0.005 ) eV / eV k B T k B T ) ] .     

In-house validation for the determination of honey adulteration with plant sugars (C4) by Isotope Ratio Mass Spectrometry (IR-MS)

The objective of any analytical measurement is to obtain consistent, reliable, and accurate data. Validated analytical methods play a major role in achieving this goal. Although there have been many studies reporting about the isotopic compositions of honeys, little has been documented regarding the validation of these methods. In this study, an Isotope Ratio Mass Spectrometry (IR-MS) method for the determination of honey adulteration was validated in-house in terms of selectivity, stability, linearity, accuracy, repeatability, sensitivity, and recovery. This study was the first attempt to describe some important method validation parameters, such as the limit of detection (LOD), limit of quantification (LOQ), and recovery for the IR-MS studies. The LOD of the method was 0.11%, and the LOQ was 0.38% based on the percent adulteration ratio. The recovery value for spiked blank honey sample with the in-house standard was 98.57%. To evaluate the usefulness of the method, 13 different brands of honey samples were collected from markets in Turkey and analyzed. The ranges of δ¹³C values of analyzed honey samples and their protein fractions were from −12.87 ± 0.01 to −25.56 ± 0.08‰ and from −23.77 ± 0.09 to −25.98 ± 0.06‰, respectively. Adulteration was found in one honey sample.     

A slip-line approach to the machining with rounded-edge tool

In this paper, a new slip-line model approach for modeling the orthogonal cutting process with rounded-edge tools and its associated hodograph are proposed. This model consists of eight regions, which include a dead region in front of the rake face of tool. Dewhurst and Collins’s matrix technique for numerically solving the slip-line problem is employed in the mathematical formulation of the new model. The experimental results show that a small dead region is seen in front of the rake face of tool during cutting with a rounded-edge cutting tool. The unknown slip-line angle pair was solved depending on the force data obtained experimentally and variation of the subregions with cutting edge radius was determined. Cutting force, thrust force, and dead zone grow as cutting edge radius increases in cutting edge-radiused tools.     

Evaluation of deflection amplification factor in steel moment‐resisting frames

Steel moment‐resisting frames (SMRFs) are the most common type of structural systems used in steel structures. The first step of structural design for SMRFs starts with the selection of the structural sections on the basis of story drift limitation. ASCE 7 (2010) requires that the inelastic story drifts be obtained by multiplying the deflections determined by elastic analysis under design earthquake forces with a deflection amplification factor (C_d). For special moment‐resisting frames, C_d is given as 5.5 in ASCE 7 (2010). Lower C_d values will increase the overall inelastic response of the structure. On the other hand, the inelastic response of the structure is expected to be less severe when designed for higher C_d values. The performance objective is that the structure should sustain the inelastic deformation demand imposed due to design earthquake ground motions. This study aims at investigating the inelastic seismic response that low‐rise, medium‐rise and high‐rise SMRFs can experience under design earthquake ground motions and maximum considered earthquake (MCE) level ground motions and evaluating the deflection amplification factors (C_d) for SMRFs in a rational way. For this purpose, nonlinear dynamic time history and pushover analyses will be carried out on SMRFs with 4, 9 and 20 stories. The results indicate that the current practice for computing the inelastic story drifts for SMRFs is rational and the frames designed complying with the current code requirements can sustain the inelastic deformations imposed during design earthquake ground motions when seismically designed and detailed. Copyright © 2013 John Wiley & Sons, Ltd.     

Facile synthesis of CsPbBr3/PbSe composite clusters

In this work, CsPbBr₃ and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr₃ quantum dots modified the electronic structure of CsPbBr₃, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr₃ perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr₃ quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr₃/PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr₃/PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr₃ reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr₃ quantum dots.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Dynamic stability of cracked multi-bay frame structures

The effects of crack depth and crack location on the in-plane static and dynamic stability of cracked multi-bay frame structures subjected to periodic loading have been investigated numerically by using the finite element method. For the rectangular cross-section beam, a crack element is developed by using the principles of fracture mechanics. In addition, the effect of the number of spans and static and dynamic load parameters on static and dynamic stability analysis are also investigated. For buckling and dynamic stability analyses, the results obtained by using the present model are presented in three-dimensional graphical forms and tables.