Image analysis study of the perimysial connective network,and its relationship with tenderness and composition of bovine meat

Image processing method was developed to predict beef tenderness, collagen and lipids contents. The study was carried out on the semimembranosus muscle (SM). Images of SM slices were acquired under visible and ultraviolet lighting. In this work statistical technique was implemented as a method to relate the distribution of intramuscular connective tissue (IMCT), characterized by image analysis, to sensory tenderness evaluated by a trained panel and collagen and total lipids contents assessed chemically. Using Multiple Linear Regression (MLR) combining visible and ultraviolet lighting, IMCT image parameters were found to be good predictors of beef tenderness (R² = 0.89), collagen and lipids contents (respectively R² = 0.82 and R² = 0.91).     

Odor active compounds content in spices and their microencapsulated powders measured by SPME

Within this study, main odorants of marjoram and thyme (linalool and thymol) were determined in spices and microencapsulated powders using solid-phase microextraction (SPME). Analyses were conducted on selected batches of spices before and after decontamination and on microencapsulated powders prepared for technological purposes (improvement of aroma in decontaminated spices). Conditions of SPME analyses were determined for individual compounds and matrices. Determination of total and surface contents of compounds and the percentage dependencies between encapsulated and surface aroma made it possible to identify the best powders in terms of their quality.     

Effect of annealing on Zn1−xCoxO thin films prepared by electrodeposition

Polycrystalline thin films of Zn_1−xCo_xO with different cobalt (Co) content were grown on indium tin oxide (ITO) substrates by cathodic electrodeposition technique and subsequently annealed in air at 400 °C. The effect of annealing in their structural, optical and chemical properties has been characterized by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Raman scattering and optical spectroscopy. Our measurements indicate that moderate annealing increases the crystal quality of the films. The films are highly transparent in the visible range and evidence an increase of the band gap and of the intensity of three typical Co absorption bands in the visible with the amount of Co. Thermal annealing produces an increase of the intensity of the Co²⁺-related absorption bands revealing that higher amount of Co atoms are occupying Zn sites.     

Die Instandsetzung der Old White Nile Bridge in Khartoum/Sudan

Die Old White Nile und die Old Blue Nile Bridge waren die ersten beiden Brücken überhaupt, die in Khartoum, der Hauptstadt des Sudan über den Nil führten. Sie wurden von der Britischen Baufirma Dorman Long Ltd. in den Jahren 1908 und 1928 gebaut und erfüllen bis heute in nahezu unveränderter Form ihren Dienst. Sie stellen damit funktionstüchtige, ingenieurtechnische Denkmale dar und zeugen von der außergewöhnlichen Ingenieurleistung, die hier unter schwierigen klimatischen und technologischen Bedingung erbracht wurde. Der folgende Beitrag befasst sich mit der Instandsetzung der Old White Nile Bridge, welche im Zeitraum von 2004 bis 2007 durchgeführt wurde. Die Schüßler‐Plan Ingenieurgesellschaft wurde von der Brückenbauverwaltung der Stadt Khartoum mit verschiedenen Untersuchungen im Zusammenhang mit dem Sanierungskonzept betraut. Der Aufsatz befasst sich neben einem historischen Rückblick mit der Entscheidung, ob ein Auswechseln der 80 Jahre alten, in ihrer Funktion stark eingeschränkten Brückenlager aus statischer Sicht notwendig ist oder diese am Bauwerk belassen werden können. Auch für die Old Blue Nile Bridge ist in den kommenden Jahren eine grundlegende Instandsetzung vorgesehen. Da die Konstruktion vergleichbar ist, können die bei der Old White Nile Bridge gewonnenen Erkenntnisse hierbei einen wertvollen Beitrag leisten. Rehabilitation of old steel bridges over the Nile in Khartoum/Sudan. The Old White Nile Bridge and the Old Blue Nile Bridge were the first bridges ever to cross the Nile at Khartoum – Capital of the Sudan. They were build In 1928 and 1908 by the British Company Dorman Long Ltd. and till today service the traffic in Khartoum in their since then unchanged form. They represent as such a functional technical monument and an attest of the unusual engineering achievement, which was realised under the most extreme climatic and technological conditions. The following report is about the rehabilitation of the Old White Nile Bridge, which was carried out from 2004 till 2007. The Schüßler‐Plan Ingenieurgesellschaft was contracted by the Bridge Department of the State of Khartoum with several analysis related with the rehabilitation concept. The report starts with an historic review of the bridge and continuous with the decision weather it is statically necessary to exchange the nearly 80 year old bearings that are strongly hindered in their function, or weather they could be left unchanged. For the Blue Nile Bridge also, a complete rehabilitation is planned in the near future. Since the two bridge structures are comparable, the knowledge collected at the Old White Nile Bridge could be of great advantage for the Blue Nile rehabilitation.     

Equilibrium adsorption isotherm and controlled release of antibiotic drug chloroamphenicol from poly(2‐vinyl pyridine/acrylic acid) hydrogels prepared by gamma radiation

High water sorption of 2‐vinyl pyridine (2‐VP)/acrylic acid (AAc) hydrogel were prepared by free‐radical polymerization in aqueous solution of 2‐VP with AAc as comonomer. The amount of ionic monomer (AAc), the irradiation dose of prepared hydrogel, the pH, and the concentration of drug play an important factor on loading, adsorption, and releasing of water‐soluble chloroamphenicol drug. As a result of dynamic swilling tests, the effect of relative content of AAc on the swelling showed that it allowed a non‐Fickian type of water diffusion. The adsorption of the drug onto (2‐VP/AAc) hydrogels was studied by Freundlish adsorption isotherm. The drug concentrations showed an influence on the adsorption of drug which increased with increasing AAc content. From Freundlish adsorption isotherm, the empirical constants, k and n, can be evaluated and showed the ability of hydrogel to be loaded by the drug and the affinity of the drug to be uptake onto the hydrogel respectively. FTIR, TGA, and SEM techniques were used to study the characterization of hydrogel (2‐VP/AAc). Additionally, the release of the drug loaded from hydrogel discs was studied microbiologically to show that hydrophilic structure of the hydrogel has an antimicrobial effect as a dehydration of cytoplasm and unbalance of the cell wall functions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

具有双对称截面的双轴加载薄壁楔形梁柱的性能分析

纵向加劲肋可以有效提高方形或矩形薄壁钢管混凝土柱的整体性能。主要讨论轴压下加劲方形短柱的非线性分析与设计。运用有限元程序ABAQUS进行非线性分析。关于荷载-位移曲线和极限强度的试验与分析结果具有良好的一致性。运用这个模型同时也对柱的性能进行了研究,讨论板的宽厚比限值和加劲肋刚度需求,以及运用现有规范预测加劲复合柱承载能力的可行性。     

A time‐dependent multiphysics,multiphase modeling framework for carbon nanotube synthesis using chemical vapor deposition

A time‐dependent multiphysics, multiphase model is proposed and fully developed here to describe carbon nanotubes (CNTs) fabrication using chemical vapor deposition (CVD). The fully integrated model accounts for chemical reaction as well as fluid, heat, and mass transport phenomena. The feed components for the CVD process are methane (CH₄), as the primary carbon source, and hydrogen (H₂). Numerous simulations are performed for a wide range of fabrication temperatures (973.15–1273.15 K) as well as different CH₄ (500–1000 sccm) and H₂ (250–750 sccm) flow rates. The effect of temperature, total flow rate, and feed mixture ratio on CNTs growth rate as well as the effect of amorphous carbon formation on the final product are calculated and compared with experimental results. The outcomes from this study provide a fundamental understanding and basis for the design of an efficient CNT fabrication process that is capable of producing a high yield of CNTs, with a minimum amount of amorphous carbon. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Economical evaluation of the fluoride removal by nanofiltration

Economic evaluation was carried out for a plant of fluoride removal by nanofiltration having a capacity of 2400 m³/d (100 m³/h) corresponding to a water consumption for 50.000 capita following the Moroccan considerations in rural medium. The design of this plant was carried out for the predetermined optimized conditions corresponding to a recovery rate of 84%, a fluoride rejection of 97.8% and a pressure pump of 10 bar. The capital cost was estimated to 748,003 € and the calculated operating cost to 0.212 €/m³. These costs were briefly compared to other ones.     

Adsorption of some heavy metal ions from aqueous solutions on Nafion 117 membrane

Nafion 117 membrane was investigated for the removal of Ni(II), Co(II), Pb(II), Cu(II) and Ag(I) metal ions from their synthesized aqueous solutions. The different variables affecting the adsorption capacity of the membrane such as contact time, initial metal ion concentration in the feed solution, pH of the sorption medium and temperature of the solution were investigated on a batch sorption basis. The affinity of Nafion 117 membrane towards heavy metal ions was found to increase in the sequence of Cu(II), Ni(II), Co(II), Pb(II), and Ag(I) with adsorption equilibrium achieved after 30 min for all metal ions. Among all parameters, pH has the most significant effect on the adsorption capacity, particularly in the range of 3.1-5.9. The variation of temperature in the range of 25-65 °C was found to have no significant effect on the adsorption capacity. Nafion 117 membrane was found to have high stability combined with repeated regeneration ability and can be suggested for effective removal of heavy metal ions such as Cu(II), Ni(II) and Co(II) from aqueous solutions.     

A numerical method for nonlinear complex modes with application to active–passive damped sandwich structures

In this paper, a numerical method is proposed for determining complex vibrations modes of sandwich structures with piezoelectric and viscoelastic layers. Based on homotopy and asymptotic numerical techniques, this method leads to the damping properties calculation (loss factor and natural frequency per mode) of the hybrid sandwich structure. The numerical results of the loss factor and natural frequency are compared to those obtained from analytical beam model and from numerical studies the modal strain energy method.