Evaluation of the pore morphology formation of the Freeze Foaming process by in situ computed tomography

The so-called Freeze Foaming method aims at manufacturing ceramic cellular scaffolds for diverse applications. One application is dedicated to potential bone replacement material featuring open, micro and interconnected porosity. However, the main challenges of this foaming method is to achieve a homogeneous pore morphology. In a current project, the authors throw light on the bubble/pore and strut formation of this process by in situ computed tomography. This allows for evaluating varying process parameter’s effects on the growth of the ceramic foam during the foaming process. As first result and basis for CT analysis, a stable and reproducible model suspension was developed which resulted in reproducible foam structures. In dependence of selected process parameters like pressure reduction rate or air content in the ceramic suspension resulting Freeze Foams became adjustable with regard to their pore morphology. Pore size and distribution data as well as the porosity were characterized and evaluated accordingly.     

Compound-specific chlorine isotope analysis: a comparison of gas chromatography/isotope ratio mass spectrometry and gas chromatography/quadrupole mass spectrometry methods in an interlaboratory study

Chlorine isotope analysis of chlorinated hydrocarbons like trichloroethylene (TCE) is of emerging demand because these species are important environmental pollutants. Continuous flow analysis of noncombusted TCE molecules, either by gas chromatography/isotope ratio mass spectrometry (GC/IRMS) or by GC/quadrupole mass spectrometry (GC/qMS), was recently brought forward as innovative analytical solution. Despite early implementations, a benchmark for routine applications has been missing. This study systematically compared the performance of GC/qMS versus GC/IRMS in six laboratories involving eight different instruments (GC/IRMS, Isoprime and Thermo MAT-253; GC/qMS, Agilent 5973N, two Agilent 5975C, two Thermo DSQII, and one Thermo DSQI). Calibrations of (37)Cl/(35)Cl instrument data against the international SMOC scale (Standard Mean Ocean Chloride) deviated between instruments and over time. Therefore, at least two calibration standards are required to obtain true differences between samples. Amount dependency of δ(37)Cl was pronounced for some instruments, but could be eliminated by corrections, or by adjusting amplitudes of standards and samples. Precision decreased in the order GC/IRMS (1σ ≈ 0.1‰), to GC/qMS (1σ ≈ 0.2-0.5‰ for Agilent GC/qMS and 1σ ≈ 0.2-0.9‰ for Thermo GC/qMS). Nonetheless, δ(37)Cl values between laboratories showed good agreement when the same external standards were used. These results lend confidence to the methods and may serve as a benchmark for future applications.     

Data Extraction from Terahertz Time Domain Spectroscopy Measurements

The potential of terahertz (THz) time domain spectroscopy to simultaneously determine the complex dielectric parameters of materials and their geometrical thickness is of high interest for scientific spectroscopy and for general metrology. This paper provides an overview of the background of the data extraction from THz measurements and discusses the accuracy and ambiguity of this extraction process. It is shown that the signal to noise ratio of the measurement as well as the bandwidth of the accessible THz spectrum define the limitation of the achievable accuracy in the data extraction.     

Comparative Study on Selected Properties of Modified Polyurethane Foam with Fly Ash

The aim of the article is to compare two types of fly ash (from the fluidized and pulverized coal combustion process) as a filler for rigid polyurethane foam. Pulverized fly ash (PFA) is widely used in building materials, while fluidized fly ash (FFA) is not currently recycled, but landfilled. The produced rigid polyurethane foams were reinforced with 5 and 10% by weight addition of fly ash from two different types of boilers. The foaming process, physical properties, morphologies and thermal degradation were subject to comparative analysis. The research indicated that fly ash intensifies the reactions of foam synthesis, most commonly, polyurethane (PU) foam with an addition of 10% PFA. What is interesting is that both ashes can be used in PU foam technology as they do not cause deterioration of the physical parameters. As shown, the addition of filler affects the morphology and impairs the brittleness. Additionally, the use of fly ash from coal combustion in the technology of polyurethane materials complies with the guidelines of the circular economy stated in the European Union legislation. Partial replacement of petrochemical components with waste filler also reduces the total energy consumption in the production of PU composites.     

Carbon Nanotubes for Microelectronics?

Despite all prophecies of its end, silicon-based microelectronics still follows Moore's Law and continues to develop rapidly. However, the inherent physical limits will eventually be reached. Carbon nanotubes offer the potential for further miniaturization as long as it is possible to selectively deposit them with defined properties.     

Electrolyte‐Gated n‐Type Transistors Produced from Aqueous Inks of WS2 Nanosheets

Solution‐processed, low cost thin films of layered semiconductors such as transition metal dichalcogenides (TMDs) are potential candidates for future printed electronics. Here, n‐type electrolyte‐gated transistors (EGTs) based on porous WS₂ nanosheet networks as the semiconductor are demonstrated. The WS₂ nanosheets are liquid phase exfoliated to form aqueous/surfactant stabilized inks, and deposited at low temperatures (T < 120 °C) in ambient atmosphere by airbrushing. No solvent exchange, further additives, or complicated processing steps are required. While the EGTs are primarily n‐type (electron accumulation), some hole transport is also observable. The EGTs show current modulations > 10⁴ with low hysteresis, channel width‐normalized on‐conductances of up to 0.27 µS µm^?1 and estimated electron mobilities around 0.01 cm² V^?1 s^?1. In addition, the WS₂ nanosheet networks exhibit relatively high volumetric capacitance values of 30 F cm^?3. Charge transport within the network depends significantly on the applied lateral electric field and is thermally activated, which supports the notion that hopping between nanosheets is a major limiting factor for these networks and their future application.     

Advanced characterization technique for mechanochemically synthesized materials: neutron total scattering analysis

Materials that adopt the pyrochlore (A₂B₂O₇) structure show promise for use in a variety of energy-related applications such as immobilization of actinide-rich nuclear waste and oxide fuel cells. Mechanochemical synthesis, a combination of milling and high-temperature treatment, has been successfully applied to fabricate many different pyrochlore compositions. High-resolution neutron total scattering experiments were used to gain fundamental insight into the structural details of milled Er₂Ti₂O₇ pyrochlore and the subsequent evolution under high-temperature treatment. The milling process creates a highly disordered structure in which local atomic ordering is present that is significantly different than the observed long-range behavior. Thermal annealing leads to a complex defect recovery scheme with a gradual local rearrangement from a weberite-type atomic ordering to a pyrochlore phase independent of the sharp long-range crystallization process. Annealing of the milled sample up to 1200 °C does not reproduce the local structure of the same pyrochlore sample prepared by solid-state synthesis. This indicates that despite both samples possessing identical long-range structures, local defects induced by the milling process persist to very high temperatures. These findings provide a direct insight into the mechanochemical synthesis of pyrochlore oxides and help to better elucidate the structural properties of highly disordered complex oxides under extreme conditions from the local atomic arrangement to the macroscale.     

Fabrication of an array of single-electron transistors for a scanning probe microscope sensor

A technique for the fabrication of single-electron transistors (SETs) on tips for use in scanning probe microscopy is presented. The tips are micromachined out of an MBE-grown AlGaAs-GaAs heterostructure with a trench within each tip. The SETs are produced by aluminum evaporation and oxidation, and natural shadowing by the trench is used to separate the source and drain electrodes. By separating adjacent tips also by trenches, the concept allows the fabrication of tip arrays for parallel probing.     

Real-time imaging of astrocyte response to quantum dots: in vivo screening model system for biocompatibility of nanoparticles

Astrocytes are the principle macroglial brain cells. They are activated by different stressors and brain injuries. Quantum dots (QDs) can cause oxidative stress. This study shows a real-time imaging of primary cortical cultures and assessment of QD-induced activation of astrocytes in the brains of transgenic mice with the luciferase gene driven by the murine astrocyte promoter. This approach may be widely applicable for assessing the astroglia/tissue response to nanoparticles in live animals.