Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.     

Statistical Optimization for Production of Light Olefins in a Fluidized‐Bed Reactor

The methanol‐to‐olefins reaction (MTO) was studied in a small‐scale fluidized‐bed reactor over synthesized silicoaluminophosphate (SAPO‐34) catalysts. Mesoporous nanocrystalline SAPO‐34 molecular sieves were synthesized hydrothermally by ultrasonic and microwave‐assisted aging processes in the presence of hexadecyltrimethylammonium bromide (CTAB) and tetradecyldimethyl(3‐trimethoxysilylpropyl)ammonium chloride (TPOAC) as surfactant agents. The Box‐Behnken experimental design method was applied to determine the optimum operating parameters of this process conducted in the fluidized‐bed reactor. The optimum conditions in terms of reaction temperature, ratio of inlet gas velocity to minimum fluidizing velocity, and MeOH weight fraction were evaluated.     

The Potential of Adaptive Design in Animal Studies

Clinical trials are the backbone of medical research, and are often the last step in the development of new therapies for use in patients. Prior to human testing, however, preclinical studies using animal subjects are usually performed in order to provide initial data on the safety and effectiveness of prospective treatments. These studies can be costly and time consuming, and may also raise concerns about the ethical treatment of animals when potentially harmful procedures are involved. Adaptive design is a process by which the methods used in a study may be altered while it is being conducted in response to preliminary data or other new information. Adaptive design has been shown to be useful in reducing the time and costs associated with clinical trials, and may provide similar benefits in preclinical animal studies. The purpose of this review is to summarize various aspects of adaptive design and evaluate its potential for use in preclinical research.     

Alkoxysilane modification of a Ti‐based catalyst system for ethylene dimerization: A step forward in enhancing productivity and selectivity

Alkoxysilanes were used as novel enhancing agents in the Ti‐based catalyst for the highly selective ethylene dimerization to butene‐1. The dimerization of ethylene was carried out using the homogeneous Ti(OBu)₄/THF/TEA/alkoxysilane catalyst system, where Ti(OBu)₄, THF (tetrahydrofuran), TEA (triethylaluminum), and alkoxysilane were used as catalyst, additive, activator, and modifier, respectively. The nature and concentration of alkoxysilanes on the dimerization rate, catalyst yield, by‐products production, and selectivity to butene‐1 were investigated in detail. It was found that the performance of alkoxysilanes assisted with the class of the Ti‐based catalyst system, developed in this work, has been furthered by high productivity and selectivity with respect to the bare catalyst system. It proved that alkoxysilanes could play an excellent improving role in the selective ethylene dimerization process. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44615.     

Amidohydroxylated polyester with biophotoactivity along with retarding alkali hydrolysis through in situ synthesis of Cu/Cu2O nanoparticles using diethanolamine

In this research, polyester fabric was modified through in situ synthesis of Cu/Cu₂O nanoparticles (NPs) in one single step processing using diethanolamine. This introduced amide and hydroxyl active groups on the polyester surface, adjusted pH, aminolyzed, and improved the surface activity of polyester. Copper sulfate was used as precursor, sodium hypophosphite as a reducing agent and polyvinylpyrrolidone as a stabilizer in a chemical reduction route at boil as a facile and cost‐effective approach. The central composite design was also utilized to optimize the processing conditions and study the effect of each variables on the weight gain, color change, and wettability of the treated fabrics. FESEM and mapping, EDX, XRD, and FTIR analysis confirmed effective assembling of Cu/Cu₂O NPs on the amidohydroxylated polyester surface. The optimum treated fabric showed excellent antibacterial properties on both Staphylococcus aureus and Escherichia coli. In addition, a very good photocatalytic activity towards degradation of methylene blue solution obtained after 24 h sunlight irradiation. Further, the hydrophilicity, mechanical properties and stability of the treated fabrics in concentrated sodium hydroxide improved through formation of amidohydroxyl active groups, amidoester cross‐linking and nanocross‐linking within polymeric chains through in situ synthesis of Cu/Cu₂O. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44856.     

A new blend of polymeric encapsulation of azithromycin by spray-drying with a pH responsive in drug release

The microencapsulation of macrolides with polymers has been reported to retard the release of the drug in oral cavity. However, these methods are unable to control drug release in gastrointestinal tract. The aim of the present study was to investigate the effect of formulation of a new polymeric encapsulation of azithromycin which is suitable for both masking and sustained release usage. Eudragit E100 and polyethylene glycol (PEG) 4000 were chosen as the barrier coatings. The spray drying technique was used to obtain the microcapsules containing azithromycin. To obtain the initial results, the effects of several parameters were evaluated. A 3:2:1 ratio of E100:PEG 4000:azithromycin at pH 6 gave the best coating condition. Thermogravimetric analysis and IR analysis data confirmed the encapsulation of azithromycin inside polymers. The encapsulated drug was released in different rates from the particles by changing the pH (1.7 and 7.4). An analysis of the kinetic release properties indicates that the release of the drug is a combination of swelling and diffusion mechanism. The synergistic cooperation between polymers and drug due to the existence of several hydrogen bonding is supposed to influence the pH-responsive property of the encapsulated drug. Moreover, the use of mixtures of E100 and PEG 4000 appears to offer a good balance between cost and efficiency.     

Cationization of cellulose/polyamide on UV protection,bio‐activity,and electro‐conductivity of graphene oxide‐treated fabric

In this work, cationized cotton/nylon fabric was treated with reduced graphene oxide (rGO) to produce highly conductive fabric. The fabric was cationized with 3‐chloro‐2‐hydroxy propyl trimethyl ammonium chloride to attract more anionic GO. The fabric was then treated with GO followed by reduction with sodium dithionite. The results of energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy indicated entire coverage of the fabric surface with rGO. The color of fabrics changed to gray‐black and the electrical resistance decreased to 0.6 × 103 Ω sq^?1. The washing fastness was measured according to ISO 105‐CO5 for color change and also electrical resistance of the samples demonstrated well stability of rGO on the fabric surface. The antibacterial activities of the treated fabrics improved against Gram‐negative bacteria including Escherichia coli (84.8%) and Pseudomonas aeruginosa (96.4%) and also Gram‐positive bacteria consisting Staphylococcus aureus (100%) and Enterococcus faecalis (98.4%). Further, the treated fabrics indicated an excellent UV reflectance of 100%. Finally heating of the cationized rGO fabric at 220 °C displayed a lower electrical resistance of 0.5 × 103 Ω sq^?1. The thermogravimetric analysis showed that heating has a slight effect on the dimensional thermal stability of the treated fabric as shrunk 2.43%. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45493.     

Cadmium adsorption on modified chitosan‐coated bentonite: batch experimental studies

BACKGROUND: Several researchers have investigated the use of chitosan as an adsorbent for removal of heavy metals from aqueous streams. Chitosan flake or powder swells and crumbles making it unsuitable for use in an adsorption column. Chitosan also has a tendency to agglomerate or form a gel in aqueous media. The adsorption capacity can be enhanced by spreading chitosan on physical supports that can increase the accessibility of the metal binding sites. Although several attempts have been made to enhance the adsorption capacity of chitosan, using various chemicals, the sorption capacity for metal ions decreased after cross‐linking of chitosan. RESULTS: Bentonite was coated with chitosan (Chi) and its derivative, 3,4‐dimethoxy‐benzaldehyde (Chi/DMB). The product was then used as adsorbent for the removal of Cd²⁺ from aqueous solutions. The presence of imine groups resulting from chemical modification was confirmed using IR, DRS and SEM. The adsorption followed the Langmuir isotherm and could be described by pseudo‐second order kinetics. CONCLUSION: Chi/DMB coated on bentonite increased the accessibility of metal binding sites. The Chi/DMB/bentonite showed no significant pH dependence in the pH range 2–9, but bentonite coated with chitosan revealed very intensive pH dependence, which had a considerable effect on cadmium removal. As expected adsorption of Cd²⁺ by Chi/bentonite and Chi/DMB/bentonite is dependent on contact time and adsorbent dose. In addition, an EDTA solution is suitable for desorption of cadmium ions, and the reusability of Chi/DMB/bentonite is quite good. © 2012 Society of Chemical Industry