A simple method for testing the electromigration resistance of solders

Recently, the size of solder bump interconnects have been significantly reduced with the advent of high-density packaging, and thus the evaluation of electromigration in solder bumps has become necessary. The present paper proposes a simple method to test the electromigration resistance of Pb-free solders. One of the key points of the present method is the fabrication of a simple solder sample that can produce sufficient current density to cause electromigration. Moreover, the actual local temperature of a small area subjected to electromigration in the sample was measured by a direct method. A right-angled diamond-shaped hole was introduced in a thin film of solder using a focused-ion-beam system. A direct current was supplied to the film far from the hole, perpendicular to the diagonal of the hole. In this way, the current density was concentrated near to the corner of the hole, and the value of this was obtained through a theoretical analysis. It was noted that the steady temperature in the film along a line extending from the diagonal, remained constant, although the current density decreased gradually far from the corner. Therefore, the temperature at a position near the corner, where electromigration takes place, can easily be found by measuring the temperature far from the corner. The temperature was measured directly under current flow conditions by utilizing the chemical reagents with known melting points. Finally, by measuring the ratio of hillock volume to the time for the current supply as a measure of the atomic flux divergence due to electromigration, the corresponding resistances of some Pb-free solders to electromigration were evaluated.     

Estimation of a nonvisible field-of-view mobile target incorporating optical and acoustic sensors

This paper presents a nonvisible field-of-view (NFOV) target estimation approach that incorporates optical and acoustic sensors. An optical sensor can accurately localize a target in its field-of-view whereas the acoustic sensor could estimate the target location over a much larger space, but only with limited accuracy. A recursive Bayesian estimation framework where observations of the optical and acoustic sensors are probabilistically treated and fused is proposed in this paper. A technique to construct the observation likelihood when two microphones are used as the acoustic sensor is also described. The proposed technique derives and stores the interaural level difference of observations from the two microphones for different target positions in advance and constructs the likelihood through correlation. A parametric study of the proposed acoustic sensing technique in a controlled test environment, and experiments with an NFOV target in an actual indoor environment are presented to demonstrate the capability of the proposed technique.     

Optimally designing caches to reduce P2P traffic

Traffic caused by P2P services dominates a large part of traffic on the Internet and imposes significant loads on the Internet, so reducing P2P traffic within networks is an important issue for ISPs. In particular, a huge amount of traffic is transferred within backbone networks; therefore reducing P2P traffic is important for transit ISPs to improve the efficiency of network resource usage and reduce network capital cost. To reduce P2P traffic, it is effective for ISPs to implement cache devices at some router ports and reduce the hop length of P2P flows by delivering the required content from caches. However, the design problem of cache locations and capacities has not been well investigated, although the effect of caches strongly depends on the cache locations and capacities. We propose an optimum design method of cache capacity and location for minimizing the total amount of P2P traffic based on dynamic programming, assuming that transit ISPs provide caches at transit links to access ISP networks. We apply the proposed design method to 31 actual ISP backbone networks and investigate the main factors determining cache efficiency. We also analyze the property of network structure in which deploying caches are effective in reducing P2P traffic for transit ISPs. We show that transit ISPs can reduce the P2P traffic within their networks by about 50-85% by optimally designing caches at the transit links to the lower networks.     

Interactive learning and management of visual information via human-like software robot

To achieve smooth real-world interaction between people and computers, we developed a system that displays a three-dimensional computer-graphic human-like image from the waist up (anthropomorphic software robot: hereinafter “robot”) on the display, that interactively sees and hears, and that has fine and detailed control functions such as facial expressions, line of sight, and pointing at targets with its finger. The robot visually searches and identifies persons and objects in real space that it has learned in advance (registered space, which was our office in this case), manages the history information of the places and times it found objects and/or persons, and tells the user, indicating their three-dimensional positions with line of sight and its finger. It interactively learns new objects and persons with line of with their names and owners. By using this function, the robot can engage in simple dialogue (do a task) with the user. Osamu Hasegawa, Ph.D.: He received the B.E. and M.E. degrees from the Science University of Tokyo, in 1988, 1990 respectively. He received Ph.D. degree from the University of Tokyo, in 1993. Currently, he is a senior research scientist at the Electrotechnical Laboratory (ETL), Tsukuba, Japan. His research interests include Computer Vision and Multi-modal Human Interface. Dr. Hasegawa is a member of the AAAI, the Institute of Electronics, Information and Communication Engineers, Japan (IEICE), Information Processing Society of Japan and others. Katsuhiko Sakaue, Ph.D.: He received the B.E., M.E., and Ph.D. degrees all in electronic engineering from the University of Tokyo, in 1976, 1978 and 1981, respectively. In 1981, he joined the Electrotechnical Laboratory, Ministry of International Trade and Industry, and engaged in researches in image processing and computer vision. He received the Encouragement Prize in 1979 from IEICE, and the Paper Award in 1985 from Information Processing Society of Japan. He is a member of IEICE, IEEE, IPSJ, ITE. Satoru Hayamizu, Ph.D.: He is a leader of Interactive Intermodal Integration Lab. at Electrotechnical Laboratory. He received the B.E., M.E., Ph.D. degrees from Tokyo University. Since 1981, he has been working on speech recognition, spoken dialogue, and communication with artifacts. From 1989 to 1990, he was a visiting scholar in Carnegie Mellon University and in 1994 a visiting scientist in LIMSI/CNRS.     

Bottom-up pyramid cellular acceptors with three-dimensional layers

In 1997, C.R. Dyer and A. Rosenfeld introduced an acceptor on a two-dimensional pattern (or tape), called the pyramid cellular acceptor, and demonstrated that many useful recognition tasks are executed by pyramid cellular acceptors in time proportional to the logarithm of the diameter of the input. They also introduced a bottom-up pyramid cellular acceptor which is a restricted version of the pyramid cellular acceptor, and proposed some interesting open problems of the bottom-up pyramid cellular acceptors. On the other hand, we think that the study of threedimensional automata has been meaningful as the computational model of three-dimensional information processing such as computer vision, robotics, and so forth. In this paper, we investigate about bottom-up pyramid cellular acceptors with three-dimensional layers, and show their some accepting powers. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

Role of granulosa and theca cell interactions in ovarian follicular maturation

We developed a culture system in which two types of ovarian follicular cells were allowed to attach to opposite sides of a collagen membrane. Using this in vitro cell culture system, we studied the effects of granulosa- and theca-cell interaction on the morphology, structure, and function of bovine ovarian follicular cells. In the first part of the study, we explored how the interaction between theca and granulosa cells affects the morphology and structure of the cells. This study was done using follicular cells collected from bovine ovarian follicles at the early developmental stage. Granulosa cells cultured alone were flattened, and formed a monolayer sheet. By contrast, granulosa cells cultured with theca cells were convex, and formed multilayer sheets. Theca cells cultured alone were thin, flat, and spindle-shaped. Theca cells cultured with granulosa cells were also spindle-shaped; however, they appeared convex and more densely packed when compared with theca cells cultured alone. In the second part of the study, the possible role of the cellular interaction in the control of differentiation and growth of granulosa and theca cells was investigated. When follicular cells were isolated from the early stage of follicular development, theca cells reduced progesterone and inhibin production by granulosa cells and augmented the growth of granulosa cells. When the cells were isolated from the late stage of follicular development, by contrast, theca cells augmented hormonal production by granulosa cells, and did not affect the growth of granulosa cells. The growth and androstenedione production by theca cells were increased by the presence of granulosa cells, irrespective of the origin of follicular cells. These results demonstrated that communication between two types of follicular cells results in reciprocal modulation of their morphology, structure, growth, and function. Cellular interactions seem to be one of the major factors controlling the differentiation and growth of the follicular cells during the follicular maturation process. In contrast to granulosa and theca cells cultured alone, cells in the coculture seemed to possess morphological and functional characteristics more similar to those of cells in the growing follicular wall in vivo. Thus, we speculate that the interaction between these two types of follicular cells is essential for the maintenance of original structure and function of the bovine follicular wall.     

Doing Business with Theory: Communities of Practice in Knowledge Management

We explore how the notion of communities of practice (CoPs) was translated and popularized from its original inception by Lave and Wenger in 1991. We argue that the Institute for Research on Learning (IRL), a spin-off of Xerox PARC, proved instrumental in enrolling CoPs into the knowledge management (KM) discipline. IRL objectified, packaged, and made a business out of CoPs. CoPs in KM are now a formalized process coupled with technological artifacts to build groups of people who effectively share knowledge across boundaries. Drawing from participant observations, archival documents, and interviews with KM practitioners in the aerospace industry as well as key players of IRL, our research seeks to unveil the invisible history that the popularization of a theory can often obscure. We argue that CoPs provide a case study for understanding how abstract concepts in science are strategically and subconsciously reified, or made objects of inquiry, and appropriated by actors. This reification of a “soft” science blurs the line between theory and technology.     

Copolymerization of Vinyl Chloride and Ethylene with Cp<Superscript>*</Superscript>Ti( OCH<Subscript>3</Subscript>)<Subscript>3</Subscript>/MAO Catalyst

Summary Copolymerization of vinyl chloride (VC) and ethylene with Cp^*Ti( OCH₃)₃/MAO catalyst was investigated. The Cp^*Ti( OCH₃)₃/MAO catalyst initiated the copolymerization of VC with ethylene, although the copolymer yields were low. In the ¹³C NMR spectra of the copolymers, the peaks based on junction part between VC and ethylene was observed, but the signals were small. From DSC measurement of the copolymers, only one glass transition temperature was observed. Thus, it is clear that the copolymerization with Cp^*Ti( OCH₃)₃/MAO catalysts gave the copolymer, and the copolymer consisting of block sequence rather than random copolymer. Received: 13 November 2002/Revised: 6 January 2003/Accepted: 10 January 2003 Correspondence to Kiyoshi Endo