Synthesis of a photoimmobilizable histidine polymer for surface modification

A novel photoreactive polymer with histidine polar groups was synthesized through the copolymerization of two types of methacrylic acid, one carrying histidine groups and the other carrying azidoaniline groups. The polymer was photoimmobilized on polyester disks for surface modification. The effect of the surface modification on the hydrophilic and biofouling properties was investigated. Static contact angle measurements showed that the polymeric surface was modified to be comparatively hydrophilic in the polymer‐immobilized region. Micropattern immobilization was carried out with a photolithographic method. Atomic force microscopy measurements showed that the polymer was formed on the disks in response to ultraviolet irradiation. Protein adsorption was reduced on the polymer‐immobilized regions, and in those regions, spreading and adhesion of mammalian cells were reduced in comparison with that in nonimmobilized regions. In conclusion, a novel histidine‐containing polymer was photoreactively immobilized on a conventional polymer surface, and it had reduced interaction with proteins and cells. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Decreasing resistances of membrane-electrode assemblies containing hydrocarbon-based ionomers for improving their anodic performances

To improve methanol-oxidation performances of membrane-electrode assemblies composed of a hydrocarbon-based ionomers, the resistances involved in the reaction were decreased. Electrochemical impedance spectroscopy revealed that the proton-conductive resistance (R_i) in the anode was decreased from 0.54 to 0.40 Ω cm² by increasing a loading ratio of platinum-ruthenium to carbon support of anode catalyst from 54 to 73 wt.%. In addition, R_i was decreased to be 0.25 Ω cm² by increasing ion-exchange capacity (IEC) of the ionomer from 1.4 to 2.9 mequiv. g⁻¹. Consequently, the polarization resistance of the anode was significantly decreased, in turn, increasing current density of methanol oxidation at the potential of 0.45 V from 0.110 to 0.244 A cm⁻².     

New catalytic technologies in Japan

Recent trends in R&D of catalytic technology in Japan (cleaner and more efficient production, environmental catalysts, and recycling processes) are overviewed and examples of recent achievements are listed. Examples are then described as zeolite-catalyzed organic reactions recently commercialized and expected to be commercialized: hydration of cyclohexene, synthesis of pyridine derivatives and gas-phase Beckmann rearrangement of cyclohexanone oxime. Finally, as an example of environmental catalysts, the NO_x storage–reduction type three-way automobile catalyst, is introduced.     

Gasification characteristics of organic waste by molten salt

Recently, along with the growth in economic development, there has been a dramatic accompanying increase in the amount of sludge and organic waste. The disposal of such is a significant problem. Moreover, there is also an increased in the consumption of electricity along with economic growth. Although new energy development, such as fuel cells, has been promoted to solve the problem of power consumption, there has been little corresponding promotion relating to the disposal of sludge and organic waste. Generally, methane fermentation comprises the primary organic waste fuel used in gasification systems. However, the methane fermentation method takes a long time to obtain the fuel gas, and the quality of the obtained gas is unstable. On the other hand, gasification by molten salt is undesirable because the molten salt in the gasification gas corrodes the piping and turbine blades. Therefore, a gasification system is proposed by which the sludge and organic waste are gasified by molten salt. Moreover, molten carbonate fuel cells (MCFC) are needed to refill the MCFC electrolyte volatilized in the operation. Since the gasification gas is used as an MCFC fuel, MCFC electrolyte can be provided with the fuel gas. This paper elucidates the fundamental characteristics of sludge and organic waste gasification. A crucible filled with the molten salt comprising 62 Li₂CO₃/38 K₂CO₃, is installed in the reaction vessel, and can be set to an arbitrary temperature in a gas atmosphere. In this instance, the gasifying agent gas is CO₂. Sludge or the rice is supplied as organic waste into the molten salt, and is gasified. The chemical composition of the gasification gas is analyzed by a CO/CO₂ meter, a HC meter, and a SO_x meter gas chromatography. As a result, although sludge can generate CO and H₂ near the chemical equilibrium value, all of the sulfur in the sludge is not fixed in the molten salt, because the sludge floats on the surface of the carbonate by the specific gravity of sludge lighter than the carbonate, and is not completely converted into CO and H₂. Moreover, the rice also shows good characteristics as a gasifying agent. Consequently, there is high expectation to using the organic waste as a molten salt gasifying agent. However, this requires lengthening the contact time between the organic waste and the molten salt.     

An economic and energy analysis on bio-hydrogen fuel using a gasification process

Recently, in Japan, recycling technologies have been developed using waste biomass material. Waste biomass is traded in the waste materials market between users and a third-party, who receives a fee for processing them. This study is an environmental and economic analysis of a biomass energy system, which can produce hydrogen fuel for fuel cells (purity of 99.99%) as an example of an environmental business model. The experimental apparatus was made based on the moving-bed gasifier by the German company, DM2 Inc., and the hydrogen gas yield was measured. Finally, the economic viability of the future hydrogen business was estimated.The experimental results obtained gave the gas concentration of 57.5% in a Steam/Carbon ratio of 1.40 at 900 °C.Assuming the plant scale of 10 t/d, the production amount of hydrogen gas would be 21.3 kg/h. Based on the law concerning waste processing in Japan, a sizeable amount of waste biomass could be expected. Therefore, if the processing fee which is paid to the group (contractor) ranges between 5.0 and 10.0 $/t, and if the whole investment cost is 6 million dollars and the depreciation period is 15 years, the bio-hydrogen production cost using the experimental data would be 5.75–7.86 $/kg-H₂ without receiving related subsidies. In a one-third grant proportion, the cost would become 4.60–6.72 $/kg-H₂.     

A novel l-amino acid ligase from bacillus licheniformis

l-Amino acid alpha-ligase (EC 6.3.2.28) catalyzed formation of alpha-peptide bond in unprotected l-amino acids in an ATP-dependent manner. BL00235 gene in Bacillus licheniformis NBRC12200 coded as a new l-amino acid ligase. BL00235 substrate specificity was strict; only methionine or leucine was acceptable as dipeptide N-terminal residues.     

Structural Change of Maize Starch Granules by Ball-mill Treatment

Effect of ball-mill treatment on physical properties and molecular change of maize starch granule was investigated. Ball-mill treatment was done by rotary type mill, and species of maize starch are normal, waxy and high amylose (amylo). Running time of the treatment is 0–320 h. Starch granules loss smoothness on surface and became rough, even though their changing speed was different among the three species. But, they retained whole figure and size after 320 h treatment in the all cases. Amylase susceptivity and water absorption activity were measured. Structural change of starch components was compared among the three species with X-ray diffraction, DSC and GPC. High Performance An-ion Exchange Chromatography (HPAEC) pattern of debranched sample treated with ball-mill for 320 h showed that formation of very short chain in amylopectin is little. ¹³C solid-NMR spectra suggest that disruption of molecules of amylopectin and amylose with ball-mill might occur at their glycosidic linkage. However, very slight radical was observed by Electron Spin Resonance spectroscopy (ESR) in the case of 320 h sample.     

Damage of yeast cells induced by pulsed light irradiation

DNA damage, such as formation of single strand breaks and pyrimidine dimers was induced in yeast cells after irradiation by pulsed light, which were essentially the same as observed with continuous ultraviolet (UV) light. The UV-induced DNA damage is slightly higher than seen with pulsed light. However, increased concentration of eluted protein and structural change in the irradiated yeast cells were observed only in the case of pulsed light. A difference in the inactivation effect between pulsed light and UV light was found and this suggested cell membrane damage induced by pulsed light irradiation. It is proposed that pulsed light can be used as an effective sterilizing method for the yeast Saccharomyces cerevisiae.     

Evaluation of Local Mechanical Properties in Depth in MoDTC/ZDDP and ZDDP Tribochemical Reacted Films Using Nanoindentation

Local mechanical properties in depth and near the surface of MoDTC/ZDDP and ZDDP tribofilms, which exhibited obviously different friction coefficients in a pin-on-disc test, were determined by using a nanoindentation technique combined with in-situ atomic force microscopy (AFM) observation. Tapping-mode AFM observation revealed that the MoDTC/ZDDP film was much rougher than the ZDDP film. Nanoindentation measurement revealed that the MoDTC/ZDDP and ZDDP tribofilms possessed different elasto-plasticities around a depth of several nanometers from the surface, although both films showed the same hardness and modulus depth distributions except in the surface area. The same mechanical depth distributions indicated that both kinds of tribofilm were functionally graded materials; that is, they consisted of a layer near the surface with lower hardness and modulus and providing lubrication and a base layer with higher hardness and modulus and serving to modify property differences at the interface. Most importantly, the different elasto-plasticities near the tribofilm surfaces revealed that the MoDTC/ZDDP tribofilm possessed lower shearing yield stress than the ZDDP tribofilm. The results of this study suggest that the presence of some solid lubricants such as MoS₂ just below the MoDTC/ZDDP film surface reduced the boundary friction coefficient.     

Motion Control of a Golf Swing Robot

In this paper we discuss our simulation and empirical study of a golf swing motion controller for a two-link golf swing robot. We distinguish two variants of the whole golf swing termed as hitting problem and stopping problem. For the hitting problem arising from backswing and downswing, we map the task into the output of a target dynamic system—a harmonic oscillator—under energy control. For the stopping problem that arises from follow-through, we propose a Proportional plus Gravity and Coupling Torque Compensation (PGCTC) feedback controller. Preliminary simulation study shows the proposed controllers solve the hitting problem and the stopping problem respectively. The controllers are implemented on a physical robot. Experimental results indicate the robot is able to perform desired golf swing-backswing, downswing, and follow-through. We also give a preliminary analysis on the proposed method to understand its merits and weaknesses.