Particle launch to 19 km/s for micro-meteoroid simulation using enhanced three-stage light gas gun hypervelocity launcher techniques

Particle launch experiments were performed to study application of the enhanced hypervelocity launcher (EHVL), i.e. the third-stage addition to the two-stage gun, for launching micron to millimeter sized particulates at velocities unobtainable with a standard two-stage light gas gun launch. Three types of particles or fliers were tested along with several barrel designs. For micron scale particles fine-grain polycrystalline ceramics were impacted and fractured, launching particulate clouds at velocities of 15 km/s. Multiple titanium particles 400 μm diameter embedded in plastic were “shotgun” launched to velocities of 10 km/s. Flier plates of 3 mm diameter by 1 mm thick Ti6Al4V were launched to 19 km/s. All experiments used a second-stage projectile with graded density facing impacting a flier in an impact generated acceleration reservoir. This paper describes the modification and adaptation of the Sandia EHVL to provide micrometeoroid simulation capabilities.     

一种有约束矩形排样问题的求解算法

对属于NP完全问题的有约束矩形排样问题，国内外多采用计算复杂度较小、时间较快、便于控制问题约束条件的启发式方法.分析了启发式排料算法影响优化程度的原因，提出利用回溯寻求优化零件组合的混合启发式策略，并利用排样过程中产生的小剩余区域划分与合并的方法和现有的矩形排样启发式算法相比，说明该方法可以更大地提高板材的利用率.     

Gas turbine disk-blade attachment crack

Evaluation of a gas turbine disk revealed a crack in the blade attachment area. The subsequent effort to understand the origin of this crack led to a series of analyses that included computing the stresses on the attachment, characterization of fatigue crack growth, and a model for fretting fatigue crack growth. These elements were brought together to simulate the conditions that led to the cracking. It is concluded that the crack was probably caused by fretting fatigue induced by the stresses related to normal takeoff and landing cycles and exacerbated by aircraft maneuvers, and that short periods of blade resonance may have contributed to the cracking. If material had not been removed from the attachment surface of the disk by service-induced wear, it is likely more cracks would have been found.     

Synthesis of MCM-41 frameworks incorporating oxygen-sulphur derivates of molybdenum and tungsten

The first examples of mesostructured materials containing Mo- and W-oxo-sulphur species incorporated into a poorly ordered MCM-41 framework have been prepared under hydrothermal condition and alkaline medium. The incorporation of oxygen-sulphur derivates of molybdenum and tungsten not only increases significantly the pore diameter, but also improves the thermal stability of the MCM-41-related mesoporous material.     

Large-scale mapping of boreal forest in SIBERIA using ERS tandem coherence and JERS backscatter data

Siberia's boreal forests represent an economically and ecologically precious resource, a significant part of which is not monitored on a regular basis. Synthetic aperture radars (SARs), with their sensitivity to forest biomass, offer mapping capabilities that could provide valuable up-to-date information, for example about fire damage or logging activity. The European Commission SIBERIA project had the aim of mapping an area of approximately 1 million km² in Siberia using SAR data from two satellite sources: the tandem mission of the European Remote Sensing Satellites ERS-1/2 and the Japanese Earth Resource Satellite JERS-1. Mosaics of ERS tandem interferometric coherence and JERS backscattering coefficient show the wealth of information contained in these data but they also show large differences in radar response between neighbouring images. To create one homogeneous forest map, adaptive methods which are able to account for brightness changes due to environmental effects were required. In this paper an adaptive empirical model to determine growing stock volume classes using the ERS tandem coherence and the JERS backscatter data is described. For growing stock volume classes up to 80 m³/ha, accuracies of over 80% are achieved for over a hundred ERS frames at a spatial resolution of 50 m.     

Designing robustly stabilising controllers for LTI spatially distributed systems using coprime factor synthesis

This paper considers the design of feedback controllers for linear, time-invariant, spatially distributed systems in an approach which generalises the H^∞-framework and in particular the H^∞ loop-shaping method. To this end, we introduce a class of spatially distributed system models called finite dimensional, distributed, linear, time-invariant systems. Sensors and actuators are considered to be part of the controller, rather than part of the plant, and thus the controller we wish to design is itself a spatially distributed system. Optimising over placements and shapes of the sensor and actuator spatial distribution functions is an integrated part of the controller design procedure. As an illustrative design example, we present the feedback stabilisation of an electrostatically destabilised, electrically conducting membrane.     

Characterizing distributed shared memory performance: a case studyof the Convex SPP1000

In a distributed shared memory (DSM) multiprocessor, the processors cooperate in solving a parallel application by accessing the shared memory. The latency of a memory access depends on several factors, including the distance to the nearest valid data copy, data sharing conditions, and traffic of other processors. To provide a better understanding of DSM performance and to support application tuning and compiler development for DSM systems, this paper extends microbenchmarking techniques to characterize the important aspects of a DSM system. We present an experiment-based methodology for characterizing the memory, communication, scheduling, and synchronization performance, and apply it to the Convex SPP1000. We present carefully designed microbenchmarks to characterize the performance of the local and remote memory, producer-consumer communication involving two or more processors, and the effects on performance when multiple processors contend for utilization of the distributed memory and the interconnection network     

A practical look at ATPG

Book Reviewed: Digital Logic Testing and Simulation, 2nd edition, by Alexander Miczo (Wiley-Interscience, 2003, ISBN 0-471-43995-9, 696 pp., $115).     

Explosive Testing of Polymer Retrofit Masonry Walls

The most widely used terrorist tactic is the improvised explosive device, which can range in size from hand-held to truck-size. Most casualties and injuries sustained in such an attack are not caused by the blast itself, but rather by the disintegration and fragmentation of walls, the shattering of windows, and by nonsecured objects propelled at high velocities by the blast. Since 1995, the Air Force Research Laboratory at Tyndall Air Force Base has investigated methods of retrofitting wall structures to better resist blast loads from external explosions. This paper summarizes results from recent tests that involve an innovative use of a sprayed-on polymer to increase blast resistance of unreinforced concrete masonry walls. Test methodology, retrofit materials considered, material properties, mechanisms of effectiveness, and research challenges are discussed.