The dynamic contact area of elastomers at different velocities

The friction in tribo-systems that contain viscoelastic materials, such as elastomers, is relevant for a large number of applications. Examples include tyres, hoses, transmission and conveyor belts. To quantify the friction in these applications, one must first understand the contact behaviour of such viscoelastic materials, both in static and in dynamic situations. This work discusses an experimental study into the change of the contact area with the sliding velocity and relates the change in contact area with the mechanical properties of the elastomer. The results show that for a tribo-system containing an elastomer, there is a threshold velocity, above which the size of the contact area significantly reduces.     

Enhancing power transfer capability through flexible AC transmission system devices:a review

Global demand for power has significantly increased, but power generation and transmission capacities have not increased proportionally with this demand. As a result, power consumers suffer from variou...     

Single phase multi color emitting Ca2LuTaO6: Dy3+/Eu3+ double perovskite oxide phosphors

The trivalent rare-earth (RE³⁺) doped phosphors show tremendous achievement in narrow band multicolor line emission for various applications. However, the 4f–4f absorption transition of these ions is forbidden in UV and blue light excitation. Usually, a sensitizer having spin allowed transition was used as a co-dopant to excite these ions via the energy transfer phenomenon. Another approach promisingly using to excite these ions by efficient energy transfer from the intrinsic emission of the Ca₂LuTaO₆ double perovskite phosphors host lattice. Phosphors of Ca₂LuTaO₆ with double perovskite structure were synthesized by using a high-temperature solid-state reaction method. The produced Ca₂LuTaO₆ double perovskite phosphors show an intrinsic broad band emission centered at 424 nm under the excitation of 313 nm UV light. The origin of this broad band blue emission was deeply investigated by using computation and experimental approaches. The trivalent activator Dy³⁺ and Eu³⁺ were doped is a single and co-dopant in the produced Ca₂LuTaO₆ phosphors to check their excitation in UV and near-UV spectral region. X-ray diffraction and scanning electron microscopy were used to investigate the structure and phase analysis. Various characterizations such as photoluminescence excitation, emission, and CIE chromaticity coordinates were measured which illustrate the potential of Dy³⁺ and Eu³⁺ activated Ca₂LuTaO₆ double perovskite phosphors for narrow band multicolor line emission for various applications.     

Effect of AlN addition on the electrical resistivity of pressureless sintered SiC ceramics with B4C and C

The effect of 0–12 wt% AlN addition on the electrical resistivity of SiC ceramics pressureless sintered with 0.7 wt% B₄C and 2.5 wt% C additives was investigated. The elemental analysis of SiC grains revealed a codoping of Al and N in the SiC lattice with a higher N concentration with 1 wt% AlN addition and a higher Al concentration with 12 wt% AlN addition. The electrical resistivity decreased by four orders of magnitude (1.7 × 10⁵ → 8.3 × 10¹ Ω cm) with 1 wt% AlN addition due to the increased carrier density (1.7 × 10¹⁰ → 2.3 × 10¹⁵ cm⁻³) caused by excess N-derived donors. However, subsequent AlN addition (4 → 12 wt%) led to an increase (2.9 × 10³ → 1.2 × 10⁴ Ω‧cm) in electrical resistivity due to (1) increased Al dopants which act as deep acceptors for trapping N-derived carriers causing a decrease in carrier density (2.3 × 10¹⁵ → 5.9 × 10¹³ cm⁻³), (2) the formation of electrically insulating SiC-AlN solid solution, and (3) the presence of electrically insulating AlN grains at the grain boundaries.     

Performance of biomimetic coating modified fiber incorporated styrene butadiene styrene modified asphalt

This study reports the effect of polydopamine bionic coating and γ-methacryloxypropyltrimethoxysilane (KH570) composite modified polyacrylonitrile (PAN) fiber as a secondary modifier on the performance of styrene-butadiene-styrene (SBS) modified asphalt. Dynamic shear rheometer test indicated the complex shear modulu, storage modulus, and loss modulus of modified PAN (KD-PAN) incorporated SBS modified asphalt was increased by 12.4, 20.5, and 11.2%, respectively compared with PAN/SBS modified asphalt. The master curve of G^* of fiber/SBS composite modified asphalt shows that the deformation resistance of KD-PAN/SBS modified asphalt is greater than that of PAN/SBS modified asphalt in the entire loading frequency range. The cone penetration test showed significantly enhanced shear strength of KD-PAN/SBS modified asphalt. The adhesion work test results and SEM images of interface between fiber and SBS modified asphalt revealed that the adhesion effect of KD-PAN and SBS modified asphalt is better than that of PAN and SBS modified asphalt. SEM and AFM images of fiber further showed that the fiber surface becomes rough after modification. The increased surface roughness of KD-PAN facilitated the adherence of SBS modified asphalt to it, which in turn led to the enhanced performance of KD-PAN/SBS composite modified asphalt at the same fiber content and temperature.     

Oxidation and sulfidation behavior of Fe-20Cr-16Ni-4Al-1Y2O3 oxide-dispersion-strengthened alloy

High-temperature oxidation and sulfidation studies were conducted on an oxide-dispersion-strengthened alloy of composition Fe-20Cr-16Ni-4Al-1Y₂O₃. The oxidation studies were conducted in air and low-PO₂ environments over a temperature range of 650–1200°C. Results are also reported on the sulfidation resistance of preformed oxide scales and the influence of reoxidation of preformed sulfide scales. Detailed microstructural results and x-ray diffraction analysis data are presented to substantiate the corrosion behavior of the alloy over the wide range of conditions anticipated in fossil-energy systems. Data are also presented on the corrosion behavior of the alloy in oxygen/sulfur mixed gas atmospheres, and the results are used to compare the corrosion behavior of the present alloy with other chromia- and alumina-forming alloys.     

Modified particle swarm optimization and fuzzy regularization for pseudo de-convolution of spatially variant blurs

We propose a modified particle swarm optimization (MPSO) based method for Pseudo De-convolution of the ill-posed inverse problem namely, the space-variant image degradation (SVD). In this paper, SVD is simulated by the pseudo convolution of different sub-regions of the image with different known blurring kernels and additive random noise with unknown variance. Two heuristic modifications are proposed in PSO: 1) Initialization of the swarm and 2) Mutation of the global best. Fuzzy logic is applied for the computation of regularization parameter (RP) to cater for the sensitivity of the problem. The computation of RP is crucial due to the additive noise in the SVD image. Thus mathematical morphology (MM) is applied for better extraction of spatial activity from the distorted image. The performance of the proposed method is evaluated with different test images and noise powers. Comparative analysis demonstrates the superiority of proposed restoration, in terms of quantitative measures, over well-known existing and state-of-the-art SVD approaches.     

PID controller tuning for a multivariable glass furnace process by genetic algorithm

Standard genetic algorithms (SGAs) are investigated to optimise discrete-time proportional-integral-derivative (PID) controller parameters, by three tuning approaches, for a multivariable glass furnace process with loop interaction. Initially, standard genetic algorithms (SGAs) are used to identify control oriented models of the plant which are subsequently used for controller optimisation. An individual tuning approach without loop interaction is considered first to categorise the genetic operators, cost functions and improve searching boundaries to attain the desired performance criteria. The second tuning approach considers controller parameters optimisation with loop interaction and individual cost functions. While, the third tuning approach utilises a modified cost function which includes the total effect of both controlled variables, glass temperature and excess oxygen. This modified cost function is shown to exhibit improved control robustness and disturbance rejection under loop interaction.     

Adaptive image denoising using cuckoo algorithm

This paper presents a novel denoising approach based on smoothing linear and nonlinear filters combined with an optimization algorithm. The optimization algorithm used was cuckoo search algorithm and is employed to determine the optimal sequence of filters for each kind of noise. Noises that would be eliminated form images using the proposed approach including Gaussian, speckle, and salt and pepper noise. The denoising behaviour of nonlinear filters and wavelet shrinkage threshold methods have also been analysed and compared with the proposed approach. Results show the robustness of the proposed filter when compared with the state-of-the-art methods in terms of peak signal-to-noise ratio and image quality index. Furthermore, a comparative analysis is provided between the said optimization algorithm and the genetic algorithm.