Efficient recursive least squares parameter estimation algorithm for accurate nanoCMOS variable gain amplifier performances

ABSTRACT

With the aggressive scaling of integrated circuit technology, parametric estimation is a critical task for designers who looked for solutions to the challenges of some Nanoscale CMOS parameters. This paper presented the prediction of primary parameters of CMOS transistor for 16 nm to 10 nm process nodes using both of Bisquare Weights (BW) method and a novel recursive least squares (RLS) parameter estimation algorithm. The proposed RLS algorithm consists of the minimisation of a quadratic criterion relating to the prediction error in order to attain the best estimated parameters of the developed mathematical model. The obtained results thanks to the proposed RLS algorithm were better than those reached using the BW method. Comparisons between Predictive Technology Model (PTM) data and parameters estimated with RLS algorithm were made to check the validity and the consistency of the proposed algorithm. These predicted primary parameters were helpful to estimate and to optimise the performances of the Variable Gain Amplifier (VGA) which was a basic circuit element with a key role in the design of new upcoming receivers.     

Dynamic risk assessment of complex systems using FCM

Analysing risk of today’s complex systems is challenging due to the complex and dynamic nature of systems. The current risk analysis tools are not able to take the complex interactions among risks into account and therefore they can’t predict the behaviour of risks accurately. In an attempt to overcome this shortcoming, this paper proposes an integrated generalised decision support tool using fuzzy cognitive maps for dynamic risk assessment of complex systems. The proposed approach has the ability to prioritise risk factors and more importantly predict and analysis the influences of each individual risk factor/risk set on the other risks or on the outcomes of complex and critical systems by taking into account probability of occurrence and consequences of risks and also considering the complex dependencies between risk factors. These features could provide practitioners with realistic results in critical industries and able them to manage risks more efficiently.     

The dynamics of local quantum uncertainty and trace distance discord for two-qubit <Emphasis Type="Italic">X</Emphasis> states under decoherence: a comparative study

We employ the concepts of local quantum uncertainty and geometric quantum discord based on the trace norm to investigate the environmental effects on quantum correlations of two bipartite quantum systems. The first one concerns a two-qubit system coupled with two independent bosonic reservoirs. We show that the trace discord exhibits frozen phenomenon contrarily to local quantum uncertainty. The second scenario deals with a two-level system, initially prepared in a separable state, interacting with a quantized electromagnetic radiation. Our results show that there exists an exchange of quantum correlations between the two-level system and its surrounding which is responsible for the revival phenomenon of non-classical correlations.     

Nucleation and Growth of Anatase Crystallites on Cotton Fabrics at Low Temperatures

Anatase nanocrystalline titania coatings were produced on cotton fabrics from alkoxide solutions using a low-temperature sol–gel process under ambient pressure. Titania coatings of the anatase form were obtained via a classical hydrolysis and condensation reaction of titanium isopropoxide that was followed by a boiling water treatment for 180 min. Spectroscopic and microscopic characterizations of the titania thin films showed that the anatase form is predominant throughout the film after the boiling water treatment and that the size of the grains is about 20 nm. The titania coating on fabrics is a promising process for use as an antibacterial photocatalyst in the textile industry.     

Superhydrophobic Silica Nanocomposite Coating by a Low-Temperature Process

We successfully prepared transparent and durable superhydrophobic silica-coating films on cotton substrates at low temperatures. The coatings were produced via cohydrolysis and polycondensation of a hexadecyltrimethoxysilane (HDTMS), tetraethoxyorthosilcate (TEOS), and 3-glycidyloxypropyltrimethoxysilane (GPTMS) mixture. The hydrophobic properties of the nanocomposite coatings were determined using contact-angle and water-gain measurements. The water contact angle for the coated substrates was 141°, whereas, before coating, the contact angle was 0° because of the superhydrophilic nature of cotton. The nanocomposite coating has new applications in daily used materials, especially those with low heat resistance, such as textiles and plastics, and as an environmentally friendly water-repellent substitute for fluorine compounds.     

Crevice corrosion behavior of high-alloy stainless steelsin a SWRO pilot plant

This paper presents the results of a study which has been carried out to investigate the crevice corrosion behavior of high-alloy stainless steel in a SWRO pilot plant. The study evaluated the corrosion performance of some austenitic and duplex steels in a crevice-forming environment created in a RO plant, especially in high-pressure feed and brine lines. The study of the effect of chemical dosing on crevice corrosion in the RO plant and electrochemical testing of crevice corrosion in the laboratory were the main objectives of this test program. High-alloy stainless steels, namely AL 6XN® and 254 SMO (superaustenitic), 2205, 2507 and DP3W (Duplex) were used in the test program. The tests were carried out in natural seawater and RO concentrate (conductivity: 75,000 to 80,000 μS/cm) at ambient temperature by operating the test plant at normal SWRO operating feed pressure of 54 bar. FeCl₃ was added as coagulant to maintain a silt density index of ∼3, and H₂SO₄ was added to feed in order to maintain the feed pH of ∼ 6.5. Chlorination and subsequent dechlorination agents were not added to the feed. For crevice corrosion tests in RO unit, the exposure periods were 6 and 12 months, respectively. The results of the tests showed that alloy DP3W has the best pitting resistance in crevice forming environment of seawater. In RO concentrate, alloys 2507 and 254 SMO showed lowest “maximum pit depth”. The results of potentiodynamic cyclic polarization (PCP) indicate that all the alloys have high pitting potential and small hysteresis loop. The results of critical crevice solution pH (CCSpH) indicated excellent resistance of alloys 254 SMO and DP3W against crevice corrosion attack and 2205 had least resistance in most aggressive sodium chloride solution.     

Organisational aspects of mammography screening in digital settings: first experiences of Luxembourg

Luxembourg has been conducting a breast cancer screening programme since 1992, like a large number of other European countries, as early detection and treatment of breast cancer have been proven to reduce mortality. The majority of these screening programmes are based on analogue X-ray technology and have optimised their organisation of transporting, archiving and reading with respect to films. Last decade is marked by enormous developments in digital mammography. Different technologies such as flat panel-, computed radiography- and scanning systems became available. Digital mammography is expected to have a major impact on quality and organisation of breast cancer screening programmes. Screening programmes are now faced with a huge challenge of incorporating the digital technology, including implementation of electronic image exchange, conception of new electronic workflow, establishing adapted quality assurance programmes and training of radiologists and technical personnel. Initial experiences of the Luxembourg approach in organising digital mammography screening and its quality assurance are reported.     

Triboelectric and Piezoelectric Effects in a Combined Tribo‐Piezoelectric Nanogenerator Based on an Interfacial ZnO Nanostructure

In this contribution, combined triboelectric and piezoelectric generators (TPEG) with a sandwich structure of aluminum‐polydimethylsiloxane/polyvinylidene fluoride composite‐carbon (Al‐PPCF‐Carbon) are fabricated for the purpose of mechanical energy harvesting. Improved by the surface modification of PPCF with zinc oxide (ZnO) nanorods through a hydrothermal method, the TPEG generates an open‐circuit voltage (V_oc) of ≈40 V, a short‐circuit current (I_sc) of 0.28 μA with maximum power density of ≈70 mWm^?2_, and maximum conversion efficiency of 34.56%. Subsequently, in order to understand the transduction mechanism of the triboelectric and piezoelectric effects, analyses focusing on the potential composition ratio in the final output and the impact of ZnO interfacial nanostructure are carried out. The observed potential ratio between triboelectric and piezoelectric effects is 12.75:1 and the highest potential improvement by ZnO nanorods of 21.8 V is achieved by the TPEG fabricated with spacer. Finally, the relationships between the voltage, power density, conversion efficiency, and the external load resistances are also discussed. Overall, the fabricated TPEG is proved to be a simple and effective nanogenerator in mechanical energy conversion with enhanced output potential and conversion efficiency.