Transport properties of undoped Cd0.9Zn0.1Te grown by high pressure bridgman technique

The electron drift mobility of undoped Cd_0.9Zn_0.1Te grown by high-pressure Bridgman method is measured by a time-of-flight technique. The sample shows a room temperature mobility and mobility lifetime product of 950 cm²/Vs and 1.6 × 10⁻⁴cm²/V, respectively. The mobility increases monotonically with decreasing temperature to 3000 cm²/Vs at 100 K. The dominant scattering mechanism for the electron transport is discussed by comparing with the theoretical mobility obtained by iterative solution of the Boltzmann equation.     

Robust scene recognition using a GA and real-world raw-image

This paper presents a new concept of scene recognition by a genetic algorithm (GA), using the 2-D gray-scale image of a working space, termed here as raw-image, and a model shaping the 2-D top-surface of a target object. In fact here, the problem of object recognition in the raw-image is changed into an optimization problem of a model-based evaluation function. We make use in this research of a GA, as a search and optimization method. This GA employs a model-based fitness function as its objective function to perform the search of a target in the raw-image. In this research, three object models, namely a frame model, a surface model, and a surface-strips model are investigated in order to determine which one is the best for scene recognition in a noisy environment. Also, in order to appraise the recognition performance of each model, a comparative study is performed by analyzing the answers to the following criteria questions: sensitivity, reliability, and speed. The effectiveness of the method has been verified through experiments using real-world raw-images, and the method has shown its robustness of object recognition with the surface-strips model, in spite of the noises in the scene.     

ADSORPTION BEHAVIOR OF COBALT( II) IONS ON LAYERED DIHYDROGEN TETRATITANATE HYDRATE FIBERS IN AQUEOUS SOLUTIONS IN THE RANGE FROM 298 to 523 K

The adsorption properties of cobalt(II) ions have been studied on layered dihydrogen tetratitanate hydrate fibers, H₂Ti₄O₉,?nH₂O, in the temperature range from 298 to 523?K. The distribution coefficients of the adsorption of cobalt (II) ions were increased with increasing temperatures up to 367?K, but were decreased in the temperature range between 367 and 523?K. The X-ray powder diffraction patterns of the fibers indicate that the fibers hold layer structure up to 367?K, but change to low crystalline anatase or its precursor above that temperature. It is notable that the material has the capability of cobalt (II) adsorption even at 523?K, although the maximum is present at 367?K.     

Improved hydrogen desorption properties of ammonia borane by Ni-modified metal-organic frameworks

Ammonia borane (AB) has attracted intensive study because of its low molecular weight and abnormally high gravimetric hydrogen capacity. However, the slow kinetics, irreversibility, and formation of volatile materials (borazine and ammonia) of AB limit its practical application. In this paper, new strategies by doping AB in metal-organic framework MIL-101 (denoted as AB/MIL-101) or in Ni modified MIL-101 (denoted as AB/Ni@MIL-101) are developed for hydrogen storage. In AB/MIL-101 samples, dehydrogenation did not present any induction period and undesirable by-product borazine, and decomposition thermodynamics and kinetics are improved. For AB/Ni@MIL-101, the peak temperature of AB dehydrogenation was shifted to 75 °C, which is the first report of such a big decrease (40 °C) in the decomposition temperature of AB. Furthermore, borazine and ammonia emissions that are harmful for proton exchange membrane fuel cells, were not detected. The interaction between AB and MIL-101 is discussed based on both theoretical calculations and experiments. Results show that Cr-N and B-O bonds have generated in AB/MIL-101 nanocomposites, and the decomposition mechanism of AB has changed.     

Creep deformation properties of creep strength enhanced ferritic steels

Creep deformation properties of creep strength enhanced ferritic steels were investigated. Good linear relationships between creep strain vs. time and creep rate vs. time were observed within a transient stage in a double logarithmic plot. It was appropriately expressed by a power law rather than exponential law, logarithmic law and Blackburn’s equation. With decrease in stress, a magnitude of creep strain at the onset of accelerating creep stage decreased from about 2% in the short-term to less than 1% in the long-term. Life fraction of the time to specific strain of 1% creep strain and 1% total strain, to time to rupture tended to increase with decrease in stress. A time to 1% total strain, that is a parameter for design of high temperature components, was observed in the transient creep stage in the short-term regime, however, it shifted to the accelerating creep stage in the long-term regime. Difference in stress dependence of the minimum creep rate was observed in the high- and low-stress regimes with a boundary condition of 50% of 0.2% offset yield stress. Stress dependence of the minimum creep rate in the high stress regime was equivalent to a strain rate dependence of flow stress observed in tensile test, and a magnitude of stress exponent, n, in the high stress regime decreased with increase in temperature from 20 at 550°C to 10 at 700°C. On the other hand, n value in the low stress regime was about 5, and creep deformation in the low stress regime was considered to be controlled by dislocation climb.     

Oxidation Resistance Evaluation of Silicon Carbide Ceramics with Various Additives

Five silicon carbide ceramics with various additives were evaluated for oxidation resistance at 1300°C in flowing dry and wet air. In the dry atmosphere, the oxidation of the five samples was diffusion-controlled, and in wet atmosphere they exhibited a linear relation beween weight gain by oxidation and water vapor content. Water vapor in the atmosphere strongly accelerated oxidation. The influence of oxidation on room-temperature strength was complex, but the samples were not as affected by oxidation.     

Sequence analysis of SRSV in fecal specimens from an epidemic of infantile gastroenteritis, October to December 1995, Japan

BACKGROUND AND HYPOTHESIS: Valvar pulmonary stenosis is a common congenital heart defect. Progression of stenosis over time, even when mild initially, has been shown by serial cardiac catheterization studies in children and adults. We studied the natural history of asymptomatic valvar pulmonary stenosis diagnosed in infancy with two-dimensional echocardiography and Doppler method. METHODS: Between November 1986 and March 1993, 51 infants in the Northeast Tennessee and Southwest Virginia region were clinically diagnosed to have isolated valvar pulmonary stenosis. In 40 patients, the diagnosis was confirmed by two-dimensional echocardiogram/Doppler and color-flow mapping study at the time of presentation, and only their course is reported. Of 40 infants, six asymptomatic infants (15%) showed rapid progression of pulmonary stenosis over a relatively short period of time. Within the first 6 months of life, three of the six infants showed worsening of the stenosis needing intervention (one had surgical valvectomy and the others had percutaneous balloon valvuloplasty). The three other infants showed a more gradual increase of pulmonary stenosis over the first 2 years of life. RESULTS: Pulmonary stenosis even when mild can worsen in infancy, and it is not possible to predict which patients will follow this course. In our group of asymptomatic infants with initial mild pulmonary stenosis, 15% developed significant stenosis that needed intervention. CONCLUSION: We recommend frequent follow-up of asymptomatic infants with mild pulmonary stenosis during the first 2 years of life to detect rapid progression that may need intervention.     

Safety Analysis of ITER EDA Design by GEMSAFE

General Methodology of Safety Analysis and Evaluation for Fusion Systems (GEMSAFE) was applied to the International Thermonuclear Experimental Reactor (ITER) design in the stage of Engineering Design Activities (EDA) to identify Design Basis Events (DBEs) and the related safety features, which were compared with those of the ITER design in the stage of Conceptual Design Activities (CDA). As a result, 18 DBEs for the EDA design were selected in comparison with 25 DBEs for the CDA design. DBEs related to the fuel area were categorized in higher event category than those of the CDA design due to the increase of the mobile tritium contained in some components. It was necessary to reduce the inventory of the tritium absorbed in the tokamak dust in the EDA design as well as in the CDA design. Some measures were recommended to reduce mobile tritium dissolved in the coolant in the single cooling loop due to the increase of this estimated inventory.     

Optical and electrical anisotropies of polydiacetylene derivative film aligned by shear stress

The molecular alignment of polydiacetylene (PDA) derivatives and their optical and electrical properties of thin films based on PDA derivatives have been studied. The PDA derivatives were aligned depending on the direction of applied shear stress in the film. From measurements of the polarized absorption and current–voltage characteristics, the optical and electrical anisotropies have been observed, that was discussed by taking the PDA main chain alignment into consideration.     

Production of antiserum for sensitive enzyme-linked immunosorbent assay of 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid by chemiluminescence

To obtain a specific antiserum for use in enzyme-linked immunosorbent assay (ELISA) of 3-carboxy-4-methyl-5-propyl-2-furanpropanoic acid (CMPF), we prepared a hapten-carrier conjugate in which the CMPF hapten was linked to a carrier protein through the 5-(1-hydrazopropyl) group. The antisera raised against this antigen in guinea pigs had excellent specificity for CMPF, showing little cross-reactivity with closely related compounds and no significant cross-reactivities with other furan compounds. The results indicated that a specific antiserum to CMPF could be produced by an antigen whose CMPF moiety is linked to a carrier protein through a position remote from the inherent functional groups. A standard curve of CMPF by ELISA using a chemiluminescence system showed a high sensitivity and a linearity in the range of 5-100 ng/mL.