The Improvement of the Quality of Raffinate Obtained from Solvent Extraction of Lubricating Oils

Abstract

Vacuum distillates of an Egyptian crude oil were subjected to solvent extraction process applying N-methyl-2-pyrrolidone (NMP) and furfural as dearomatization solvents. The study shows that the extraction solvent together with the temperature and solvent-to-oil ratio have a significant effect on the yield and quality of produced lubricating oils. The optimum temperature for extracting light waxy distillates with NMP is 55°C at the solvent-to-feed ratio 2:1. These conditions are appropriate to remove the major portion of aromatics from the raffinate. The apparent activation energy (Ea), enthalpy (ΔH*), entropy (ΔS*), and free energy of activation (ΔG*) were calculated for the solvent dearomatization process.     

Theoretical bounds for the bit error rate for SAC OCDMA balanced detectors with multiple photodiodes

Photonic Network Communications - In this paper, we derive the theoretical lower and upper bounds for bit error rate (BER) for spectral amplitude coding OCDMA balanced detector (BD) employing...     

Discrete-time implementation of high-gain observers for numerical differentiation

High-gain observers have been used in non-linear control to estimate derivatives of the output. In this paper, we study discrete-time implementation of high-gain observers and their use as numerical differentiators, in noise-free as well as noisy measurements. We show that discretization using the bilinear transformation method gives better results than other discretization methods. We also show that many of the available numerical differentiators are special cases of the bilinear discrete-time equivalents of full-order or reduced-order high-gain observers.     

Theoretical calculations of the surface tension of Ag(1−x)-Cu(x) liquid alloys

The surface tension of silver-copper binary liquid alloys is calculated, in the frame work of Eyring theory. The calculations were made for different compositions (mole fraction, x_Cu = 0, 0.2, 0.4, 0.6, 0.8 and 1), in the temperature range 1100-1800 K. The surface tension decreases with temperature increase, at a fixed copper fraction x_Cu, and increases with increasing copper content. The calculated results are appropriately compared with existing literature data.     

Choice of a pertinent color space for color texture characterization using parametric spectral analysis

This article presents a comparison of different color spaces including RGB, IHLS and L?a*b* for color texture characterization. This comparison is based on the fusion of the independent spatial structure and color feature cues. In IHLS and L*a*b*, two channel complex color images are created from the luminance and the chrominance values. For such images, two dimensional complex multichannel linear prediction models are used to perform parametric power spectrum estimation and the structure feature cues are computed from this estimated power spectrum. Quantitative comparison of auto spectra of luminance and combined chrominance channels for different color spaces is done. This comparison is based on the degree of decorrelation between luminance and chrominance information provided by different color space transformations. Three dimensional histograms are used as color feature cues. Then, to classify color textures, Kullback-Leibler divergence based symmetric distance measures are calculated for pure color, luminance structure and chrominance structure feature cues. Individual as well as combined effect of information from all feature cues on classification results is then compared for different color spaces and different color texture data sets. The proposed color texture classification method performs better than the state of the art methods in certain cases. The L*a*b* color space gives us a better characterization of the chrominance spatial structure as well as the overall spatial structure for all of the chosen data sets. Experimental results on pixel classification of color textures are also presented and discussed.     

Desorption kinetics of trichloroethylene and perchloroethylene from aged dense nonaqueous phase liquid-contaminated soil

Batch experiments were conducted to investigate the desorption kinetics of a contaminated soil collected from a field site at Hill Air Force Base (AFB), Utah. The site has been contaminated with many dense nonaqueous phase liquids (DNAPLs), primarily trichloroethylene (TCE) and perchloroethylene (PCE), for more than 60 years. Similar desorptive behaviour of both TCE and PCE was observed: a stage of fast release of the contaminant at the start followed by a very slow stage. Moreover, it is suggested that not all the contaminant in the solid phase may be released to the aqueous phase, apparently due to the age factor. Local variations were observed in the effective diffusivity and other sorption-related parameters across the site due to aquifer heterogeneity. Experimental results were then simulated using a numerical code based on the intraparticle diffusion model. Good agreement was found between both results.     

Robust control of an isolated hybrid wind-diesel power system using Linear Quadratic Gaussian approach

This paper presents the application of the Linear Quadratic Gaussian (LQG) controller for voltage and frequency regulation of an isolated hybrid wind-diesel scheme. The scheme essentially consists of a vertical axis wind turbine driving a self-excited induction generator connected via an asynchronous (AC-DC-AC) link to a synchronous generator driven by a diesel engine. The synchronous generator is equipped with a voltage regulator and a static exciter. The wind generator and the synchronous generator together cater for the local load and power requirement. However, the load bus voltage and frequency are governed by the synchronous generator. The control objective aims to regulate the load voltage and frequency. This is accomplished via controlling the field voltage and rotational speed of the synchronous generator. The complete nonlinear dynamic model of the system has been described and linearized around an operating point. The standard Kalman filter technique has been employed to estimate the full states of the system. The computational burden has been minimized to a great extent by computing the optimal state feedback gains and the Kalman state space model off-line. The proposed controller has the advantages of robustness, fast response and good performance. The hybrid wind diesel energy scheme with the proposed controller has been tested through a step change in both wind speed and load impedance. Simulation results show that accurate tracking performance of the proposed hybrid wind diesel energy system has been achieved.     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.