Study of annealing effects in In-Sb bilayer thin films

The thin films of In-Sb having different thicknesses of antimony keeping constant thickness of indium was deposited by thermal evaporation method on ITO coated conducting glass substrates at room temperature and a pressure of 10⁻⁵ torr. The samples were annealed for 1 h at 433 K at a pressure of 10⁻⁵ torr. The optical transmission spectra of as deposited and annealed films have been carried out at room temperature. The variation in optical band gap with thickness was also observed. Rutherford back scattering and X-ray diffraction analysis confirms mixing of bilayer system. The transverse I-V characteristic shows mixing effect after annealing at 433 K for 1 h. This study confirms mixing of bilayer structure of semiconductor thin films.     

Enalapril-induced renal artery thrombosis in unilateral renal artery stenosis

Intravascular adhesion of leucocytes plays a role in the pathogenesis of acute and chronic vascular disease. Regular aerobic exercise seems to protect against vascular disease. Since leucocyte adhesion is mediated by integrins, we tested the hypothesis that surface expression of the integrin adhesive receptors LFA-1 (cd11a/cd18), MAC-1 (cd11b/cd18), gp 150/95 (cd11c/cd18), and VLA-4 (cd29/cd49) is decreased by moderate endurance exercise. Surface expression of integrins was measured by FACS analysis in 19 healthy subjects (16 males, 3 females, 36.6 +/- 8.7 years, 177.1 +/- 7.5 cm, 70.3 +/- 8.1 kg) before and after submaximal exercise (3 h run) using monoclonal antibodies against cd11a, cd11b, cd11c, cd18, cd29 and cd49. In addition, we compared resting integrin expression in this group with a group of sedentary subjects (19 males, 6 females, 29.3 +/- 5.3 years). White blood cell count increased from 5300 ml(-1) to 9740 ml(-1) during exercise (P < 0.001). Nevertheless, the expression (indicated by the mean log fluorescence) of cd11a (94 +/- 24 vs. 78 +/- 14) and cd18 (128 +/- 31 vs. 102 +/- 21) on lymphocytes and of cd11a (104 +/- 25 vs. 85 +/- 16), cd11c (497 +/- 171 vs. 408 +/- 126) cd29 (109 +/- 16 vs. 89 +/- 16), cd49 (69 +/- 8 vs. 54 +/- 11) on monocytes was decreased after exercise (all P < 0.05). In contrast, integrin expression on granulocytes was not altered by exercise. Comparison of exercising and sedentary subjects showed a significantly decreased expression of integrins in exercising subjects. Our results demonstrate that moderate exercise leads to decreased expression of integrin receptors on leucocytes. This decreased expression of adhesion molecules may result in decreased adhesion and infiltration of leucocytes into the vessel wall. This phenomenon may play a role in the beneficial effect of moderate exercise in prevention of acute and chronic vascular disease.     

Nano ZnO grafted on MAA/BA/MMA copolymer: An additive for hygienic coating

Nano ZnO particles were synthesized by treating zinc oxalate with glycol and amines. The treated nano particles were in-situ grafted on methacrylic acid/butyl acrylate/methyl methacrylate via solution polymerization technique to prevent aggregation in the coating. The characterizations of grafted and treated nano ZnO particles were performed by transmission electron microscopy, atomic force spectroscopy, X-ray diffraction and particle size analysis. The outcome of this surface modification and varying concentrations of nano ZnO has helped in establishing it as an antibacterial additive in hygienic coating.     

Evaluation of the physical and mechanical properties of high drug load formulations: Wet granulation vs. novel foam granulation

The purpose of this study was to evaluate the influences of intrinsic drug mechanical properties and different granulation binder delivery processes on the physical and mechanical properties of high drug load granulations after wet granulation. Formulations (80% w/w) of acetaminophen (APAP), metformin and aspirin, which are brittle, viscoelastic, and ductile, respectively; were granulated by high-shear wet granulation. Two modes of binder delivery for wet granulation, either conventional or binder foam, were investigated. Particle size, surface area and pore size of the granulations were characterized. Compacts were prepared at a solid fraction of 0.9 under tri-axial decompression and Hiestand indices (worst-case bonding index (BI_w) and brittle fracture index (BFI)) of the compacts were determined. APAP formulations exhibited the smallest geometric mean particle sizes (d_g) and showed only slight differences in d_g values between the two granulation processes. Binder delivery mode affected mechanical properties of the granulated model drugs differently. Foam granulation appeared to enhance the granule plasticity for APAP while aspirin showed a mixed deformation mechanism based on both its high BI_w and high BFI values. The higher BI_w value for aspirin after foam granulation may be attributed to improved binder distribution among particles during granulation. On the other hand, conventional wet granulation improved the plasticity of metformin as measured by the higher BI_w and lower BFI values. Therefore, conventional wet granulation process conferred advantages in manufacturability and product quality for metformin; as compared to foam granulation which did not enhance plasticity for metformin. Based on this study, a wet granulation process can be selected based on knowledge of the intrinsic drug mechanical properties.     

A Review of Wind-Resource-Assessment Technology

Generation of electrical energy from wind can be economically achieved only where a significant wind resource exists. Because of the cubic relationship between wind velocity and output energy, sites with small percentage differences in average wind speeds can have substantial differences in available energy. Therefore, accurate and thorough monitoring of wind resource at potential sites is a critical factor in the siting of wind turbines. An accurately measured wind-speed frequency spectrum at a site is another important factor. For assessment of the wind-power potential of a site, most investigators have used simple wind-speed distributions that are parametrized solely by the arithmetic mean of the wind speed. Assessment of power output of a wind turbine will be accurate if the wind speeds measured at the hub height (30–50 m) of a wind turbine-generator are known. However, the existing wind data available at most of the meteorological stations worldwide is measured at a height of 10 or 20 m above the ground. Therefore, wind speeds measured at anemometer heights are extrapolated to the hub height of the wind turbine. Many investigators have proposed simple expressions for height extrapolation of wind speeds. This paper reviews wind-speed prediction and forecasting, and development of techniques for accurate assessment of wind-power potential. Also, the need of wind-resource assessment and the techniques and methods used for it are highlighted.     

Differential expression of uterine progesterone receptor forms A and B during the menstrual cycle

Recent studies suggest that the progesterone receptor isoforms (PR-A and PR-B) activate genes differentially and that PR-A may act as a repressor of PR-B function. Hence, the absolute and relative expression of the two isoforms will determine the response to progesterone. We have measured their relative expression in the uterus of cycling women who underwent endometrial biopsy. PR isoforms were identified on blots of SDS-PAGE gels by reaction with the AB-52 antibody after immunoprecipitation from endometrial extract. Both isoforms were highest in the peri-ovulatory phase, but levels of PR-A were always higher than those of PR-B. The ratio of PR-A to PR-B changed during the menstrual cycle. Between days 2 and 8, PR-B is almost undetectable and the A:B ratio is >10:1. From days 9 to 13, the ratio is about 5:1, and it is about 2:1 between days 14 and 16. Thereafter, PR-B dwindles rapidly and is virtually undetectable at the end of the cycle. In various hypoestrogenic environments, PR-B expression was reduced. However, exogenous estrogens in the follicular phase in the form of oral contraceptives, enhanced PR-B expression. These data support the possibility that progesterone acts through cycle-specific PR isoforms.     

Optimal placement of piezoelectric patches over a smart structure

Control of structural vibrations has significant applications in manufacturing, infrastructure engineering, aerospace engineering and various consumer products. In last two decades, considerable attention has been focused to suppress structural vibrations using active vibration control technique. Various researchers have proposed various optimization criteria for optimal placement of piezoelectric patches over a smart structure to suppress vibrations using various optimization techniques. This paper presents a review of various optimization criteria and techniques that have been used by various researchers in the field of smart structures. Mathematical expressions of objective functions of twelve optimization criteria have been presented and their justifications have been reasoned. Step by step procedures of commonly used optimization techniques have also been presented.     

Correlation Between Tablet Disintegration and In Vitro Dissolution

The effect of aging on the mechanical properties of tablets has not been thoroughly investigated in the past. A recent article (1) addresses this problem in respect to tries Icium phosphate tablets and exhibits the parameters of importance in tablet storage. Two of the aspects studied were dissolution and disintegration.     

Methyl acrylate/1‐octene copolymers: Lewis acid‐mediated polymerization

Copolymerization of methyl acrylate (MA) with 1‐octene (1‐Oct) was conducted in the presence of free radical initiator, 2,2′‐azobis(2‐methylpropionitrile) (AIBN) using heterogeneous Lewis acid, acidic alumina. The polymers obtained were transparent and highly viscous liquids. The copolymer composition calculated from ¹H NMR showed alkene incorporation in the range of 10–61%. The monomodal nature of chromatographic curves corresponding to the molecular weight distribution in gel permeation chromatography (GPC) further confirmed that the polymers obtained are true copolymers. The number–average molecular weights (M_n) of the copolymers were in the range of 1.1 × 10⁴–1.6 × 10⁴ with polydispersity index of 1.75–2.29. The effects of varying the acidic alumina amount, time of polymerization, and monomer infeed on the incorporation of 1‐Oct in the polymer chain were studied. Increased 1‐Oct infeed led to its higher inclusion in the copolymer chain as elucidated by NMR. DEPT‐135 NMR spectral analysis was used to explicate the nature of arrangement of monomer sequences in the copolymer chain. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009