铝蜂窝板在济康住院大楼幕墙工程中的应用

十堰市太和医院济康住院大楼平面造型为梭形,幕墙板设计为弧形,结合大楼对幕墙板的要求和铝蜂窝板的性能特点,经对比分析,最后选择铝蜂窝板作为幕墙板。深入介绍了铝蜂窝板材质、表面处理、外观质量以及其装配和生产、技术装备要求,详细介绍了铝蜂窝板幕墙的安装工艺,总结了主要质量控制措施。实践表明,铝蜂窝板幕墙满足了大楼整体外墙大分块光滑平整、抗风和大尺寸内外对缝的要求,整体效果良好。     

Global sensitivity analysis of unreinforced masonry structure using high dimensional model representation

Sensitivity Analysis (SA) has very important implications in terms of model assessment. It is an important part of reliability studies as well. This paper presents global SA using High Dimensional Model Representation (HDMR) on a mesoscale model of unreinforced masonry shear wall. The mesoscale model contains both geometric as well as material nonlinearity. Prior to performing global SA: (a) mesh sensitivity study in order to determine the optimum mesh size; and (b) experimental validation of the finite element simulation using the data available in the literature, are conducted. The ability of two major variations of HDMR, namely RS (Random Sampling)-HDMR and Cut-HDMR, for conducting global SA is explored, first by solving analytical problem and later by analyzing the mesoscale model of unreinforced shear wall. From the study, recommendations are made to obtain the sensitive parameters of an unreinforced masonry structure with minimal computational effort.     

A limit state design (LSD) approach for comparing relative drying performance of wood-frame envelope systems with full-scale lab testing

The capacity of drying out moisture accumulated within stud cavities, especially moisture due to rain penetration, is an important characteristic affecting the performance and durability of building envelope systems. This paper introduces a new approach for evaluating such drying performance based on the concepts and procedures of Limit State Design (LSD) used in structural engineering. For a well performing envelope, the moisture load must be less than the drying capacity of the system. The drying capacities are obtained through full-scale experiments that utilize moisture loading derived from a moisture source (water tray) placed at the bottom of the stud cavity. In moving out of the cavity, part of the moisture will be absorbed by the materials surrounding the stud cavity. When any part of the wall specimen reaches 20% MC, the cumulative evaporation from the water tray is termed as the ICEA (in-cavity evaporation allowance) of that wall system. The ICEA value is dependent on the envelope configuration and is a good indicator of the drying performance of that wall system. By comparing ICEA values of wall systems with their respective moisture loads, those envelopes having ICEA values higher than the amount of rain penetration calculated from prevailing driving rain and faults in the envelope are deemed to have adequate drying capacity.     

四川白玉铜铅锌共生矿清洁分离技术研究

四川白玉铜铅锌共生矿矿石性质复杂,铜铅矿物嵌布粒度极细,铜锌矿物致密共生,分离较为困难。采用铜铅部分混合优先浮选-选铅-选锌-铜铅混合精矿加压浸出分离工艺流程,以EM-WB-12为铜矿物捕收剂进行选矿试验,并在选铅时进行了粗精矿再磨,实验室试验可获得Cu+Pb品位28.09%,铜、铅回收率分别为85.00%、53.38%的铜铅混合精矿,铅品位和回收率分别为52.68%、30.13%的铅精矿以及锌品位和回收率分别为52.72%、73.62%的锌精矿,同时伴生银得到了有效回收。对铜铅混合精矿进行加压浸出,取得了Zn浸出率94.36%,Cu浸出率91.21%的优良指标,渣中Pb脱硫后品位达到40%。在此基础上进行了选矿扩大试验,其试验指标较好地验证了实验室试验结果。     

LNG接收终端

文章描述了液化天然气(LNG)接收终端的主要功能,介绍LNG接收终端的工艺流程,为求能使同行们更好的了解这类新兴燃气场站,同时探讨了LNG接收终端在我国的发展新方向,并对LNG接收终端在我国的发展提出了几点建议。     

酒店自动喷淋系统设计简介

本文结合某接待中心简要介绍了宾馆自动喷淋系统喷头的选用、喷头工作压力的确定,客房喷头的布置及喷淋系统流量的计算等。     

基于多级维纳滤波的机载共形阵雷达杂波抑制方法研究

目前,多级维纳滤波器是一种收敛速度最快的降秩空时自适应处理算法,但它只适合于处理平稳随机信号,不能直接用于抑制非均匀的机载共形阵雷达杂波。该文在分析共形阵雷达杂波特性的基础上,提出采用俯仰向空域滤波改善杂波的非均匀性,改进了传统的协方差矩阵加权算法,最后形成了一种基于俯仰向空域滤波的协方差矩阵加权多级维纳滤波算法,用于抑制共形阵雷达杂波。仿真结果表明,该文方法抑制共形阵雷达杂波的综合性能优于现有其他方法,且计算复杂度低,收敛速度快,便于工程实现,在共形阵雷达杂波抑制中具有实际应用前景。     

基于方位各向异性理论的地震预测裂缝方法及应用综述

裂缝预测在碳酸盐岩储层评价中是至关重要的,预测裂缝的方法主要包括基于岩芯观察描述、测井识别裂缝、地震资料预测裂缝等。重点阐述了地震预测裂缝的4种方法,如多波多分量预测裂缝、P-S转换波预测裂缝、VSP地震预测裂缝以及纵波AVAZ预测裂缝。综合比较各种方法的原理和费用投资情况认为,纵波AVAZ预测裂缝是一种有效且价格相对合理的方法。最后介绍了纵波AVAZ预测裂缝方法在A油田的应用实例,有一定的预测效果。     

绿豆生物活性物质及功能的研究进展

综述了绿豆生物活性物质及功能的研究进展。绿豆的生物活性物质包括蛋白水解酶、胰蛋白酶抑制剂、苯丙氨酸解氨酶、超氧物歧化酶(SOD)、黄酮类化合物、植物凝集素和抗真菌蛋白等。它具有抗菌、抗肿瘤、抗氧化、提高免疫力、降血脂和解毒等生理功能。提取、纯化绿豆中新的生物活性物质,探索其在农业、功能食品和医学上的应用,是进一步研究的方向。     

A novel multifunctional phosphorous and nitrogenous reactive flame retardant toward epoxy resins by one-pot method

Epoxy resin (EP) has attracted considerable attention in packaging, electronic devices, aerospace, and coatings fields owing to its remarkable chemical and physical performance. However, the inherent flammable performance and unfavorable brittle nature seriously restricted its application in sophisticated industry. Herein, an efficient reactive 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO)-based flame retardant (DB-DAD) was prepared by a facile “one-pot” method. Due to their synergistic gas-phase and solid-phase flame-retardant effects, DB-DAD modified EP composites (EP/DB-DAD composite) easily achieved UL-94 V-0 ratings, and an EP/DB-DAD composite with a 0.32 wt% phosphorus content had an excellent (30.2%) limiting oxygen index. In addition, the amounts of heat and smoke decreased by 28.1% and 24.8%, respectively. Due to the introduction of long and flexible aliphatic chains, the EP/DB-DAD composites exhibited satisfactory mechanical properties, the flexural and tensile toughness of EP/6% DB-DAD were 82.5% and 62.2% higher than those of neat EP, respectively. Furthermore, EP/DB-DAD composite showed good transparency (>85%) and favorable UV shielding performance. The EP/DB-DAD composite with good comprehensive performance is extremely promising to accelerate EP application in high-tech industries.