An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.     

New Approach to Inter‐domain Multicast Protocols

IPTV broadcast channels and video content distribution are increasingly saturating network paths. New solutions based on inter‐domain multicast protocols could contribute to the enhancement of multimedia content distribution over the Internet. The aim of this paper is to propose new capabilities for an existing inter‐domain multicast protocol, the Protocol Independent Multicast‐Sparse Mode. We describe the modified protocol and analyze its behavior using newly developed tools based on an open‐source software simulator. The resulting protocol does not require topology information, which is advantageous for easier deployment. In addition, the adopted solution avoids inherent problems with inter‐domain multicast routing, such as multiple paths and path asymmetries.     

Parallel Algorithms Based on the Temporal-Window Method for Non-Alternating 3D-WT over Angiographies Using a Multicomputer

In this paper, we introduce and evaluate the parallel implementations of two video sequences decorrelation algorithms having been developed based on the non-alternating three-dimensional wavelet transform (3D-WT) and the temporal-window method. The proposed algorithms have been proven to outperform the classic 3D-WT algorithm in terms of a better coding efficiency and lower computational requirements while enabling a lossless coding and a top-quality reconstruction: the two most highly relevant features to medical imaging applications. The parallel implementations of the algorithms are developed and tested on a shared memory system, a SGI Origin 3800 supercomputer, making use of a message-passing paradigm. We evaluate and analyze the performance of the implementations in terms of the response time and speed-up factor by varying the number of processors and various video coding parameters. The key point enabling the development of highly efficient implementations rely on a workload distribution strategy supplemented by the use of parallel I/O primitives, for better exploiting the inherent features of the application and computing platform. Two sets of I/O primitives are tested and evaluated: the ones provided by the C compiler and the ones belonging to the MPI/IO library.     

Sine-Wave Signal Characterization Using Square-Wave and ΣΔ-Modulation: Application to Mixed-Signal BIST

This paper presents a method for extracting, in the digital domain, the main characteristic parameters of an analog sine-wave signal. It is based on a double-modulation, square-wave and sigma-delta, together with a simple Digital Processing Algorithm. It leads to an efficient and robust approach very suitable for BIST applications. In this line, some considerations for on-chip implementation are addressed together with simulation results that validate the feasibility of the proposed approach.Diego Vázquez was born in El Coronil, Sevilla, Spain, in 1966. He received the Licenciado en Física degree in 1989 and the Doctor en Ciencias Físicas degree in 1995, both from the University of Sevilla, Spain. Since 1990, he has been with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, where he is a Associate Professor, and also with the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica (IMSE-CNM-CSIC), Sevilla, Spain. He has published about 100 papers in international journals, books and major conferences. In 1992 he won the Best Paper Award of the 10th IEEE VLSI Test Symposium. His research interests are in the fields of design, fault tolerance, test, and design for testability of analog and mixed-signal circuits.Gloria Huertas was born in Sevilla, Spain, in 1974. She received the Licenciado en Física degree in 1997 and the Ph.D. in 2004, both from the University of Sevilla, Spain. Since then, she has been with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, where she is Assistant Professor, and also with the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica (IMSE-CNM-CSIC), Sevilla, Spain. Her research focuses on designing electronic mixed-signal circuits and systems including techniques for testability.África Luque was born in Zamora (Spain) in 1977. She received the Licenciado en Física degree in 2000 from the University of Sevilla, Sevilla, Spain. She is with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, and also with the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica (IMSE-CNM-CSIC), Sevilla, Spain, where she is currently pursuing the Ph.D. degree. Her research focuses on the design and test of mixed-signal circuits including Silicon-On-Insulator technologies.Manuel J. Barragan was born in Sevilla, Spain, in 1980. He received the Licenciado en Física degree in 2003 from the University of Sevilla, Sevilla, Spain. He is currently pursuing the Ph.D. degree from the Instituto de Microelectrónica de Sevilla (IMSE, CNM) on the topics of test and design for testability of analog and mixed-signal circuits.Gildas Leger was born in St. Brieuc, Côtes dArmor, France, in 1976. He received the Ingénieur en Physique degree in 1999 from the National Institute of Applied Sciences (INSA) of Rennes, France.He is currently pursuing the Ph.D. degree from the Instituto de Microelectrónica de Sevilla (IMSE, CNM). His research focuses on designing electronic mixed-signal circuits and systems including techniques for testability, specially in the domain of analog to digital conversion.Adoración Rueda joined the Department of Electronics and Electromagnetism at the University of Seville in 1976 as Assistant Professor, and obtained the Ph.D. degree in 1982. From 1984 to 1996 she was Associate Professor in that Department, where now holds the position of Full Professor in Electronics. In 1989 she became researcher at the Department of Analog Design of the National Microelectronics Center (CNM), now Institute of Microelectronics at Seville (IMSE).She has participated in several research projects financed by the Spanish CICYT and by different programs of the European Community. She has published about 135 papers in international journals, books and major conferences. In 1992 she won the Best Paper Award of the 10th IEEE VLSI Test Symposium. Her research interests are currently focused on the topics of Design and Test of Analog and Mixed-signal Circuits, Behavioral Modeling of Mixed-signal Circuits, and development of CAD tools.Jose Luis Huertas received the Licenciado en Física degree nd the Doctor en Ciencias Físicas degrees in 1969 and 1973, respectively, both from the University of Sevilla, Spain.From 1970 to 1971, he was with the Philips International Institute, Eindhoven, The Netherlands, as a postgraduate student. Since 1971, he has been with the Departamento de Electrónica y Electromagnetismo, University of Sevilla, Spain, where he is a Full Professor. He is also the Director of the Instituto de Microelectrónica de Sevilla, Centro Nacional de Microelectrónica de Sevilla, Seville, Spain. His current interests include the design and testing of analog/digital integrated circuits, computer-aided IC analysis and design, fuzzy logic, nonlinear microelectronics, and neural networks.     

Practical Harmonic Cancellation Techniques for the On-Chip Implementation of Sinusoidal Signal Generators for Mixed-Signal BIST Applications

Harmonic cancellation strategies have been recently presented as a promising solution for the efficient on-chip implementation of accurate sinusoidal signal generators. Classical harmonic cancellation techniques consist in combining a set of time-shifted and scaled versions of a periodical signal in such a way that some of the harmonic components of the resulting signal are cancelled. This signal manipulation strategy can be easily implemented using digital resources to provide a set of phase-shifted digital square-wave signals and a summing network for scaling and combining the phase-shifted square-waves. A critical aspect in the practical implementation of the harmonic cancellation technique is the stringent accuracy required for the scaling weight ratios between the different phase-shifted signals. Small variations between these weights due to mismatch and process variations will reduce the effectiveness of the technique and increase the magnitude of undesired harmonic components. In this work, different harmonic cancellation strategies are presented and analyzed with the goal of simplifying the practical on-chip implementation of the scaling weights. Statistical behavioral simulations are provided in order to demonstrate the feasibility of the proposed approach.     

Polycarbonate films metalized with a single component molecular conductor suited to strain and stress sensing applications

The paper reports all-organic strain and stress sensitive films that use electrical monitoring approach. The films were prepared by self-metallizing polycarbonate films with the single component molecular conductor [Au(α-tpdt)₂]⁰ (tpdt = 2,3-thiophenedithiolate). It was shown that [Au(α-tpdt)₂]⁰ by its nature is able to form metallic solid material with low crystallinity. Electromechanical tests demonstrated that the developed films are strain-resistive materials with advanced elastic properties: their electrical resistance varies linearly with uniaxial elongation up to relative strain being of 1.0% that is about five times larger than that for conventional metals. The gauge factor of the films is 4.4 and stress sensitivity is 30 Ω/bar. The processing characteristics of polycarbonate films, self-metalized with a metallic [Au(α-tpdt)₂]⁰-based layer, make them potentially useful for engineering flexible, lightweight, strain and pressure sensors. Due to electromechanical characteristics these films are suited to strain sensing applications requiring miniature strain control in a wide deformation range.     

Star-shaped hexaaryltriindoles small molecules: Tuning molecular properties towards solution processed organic light emitting devices

We present a series of differently substituted star-shaped hexaaryltriindoles with tunable light-emitting properties. The deep blue emission is unchanged by donor peripheral substituents while an increasing acceptor character produces a reduction of the optical gap, an increased Stokes shift and eventually leads to the appearance of a new electronic level and to the simultaneous deep blue (413 nm) and green (552 nm) emission in solution. Quenching by concentration increases with the acceptor character but is lower as the tendency of these compounds to aggregate is stronger. Solution processed thin films present optical and morphological qualities adequate for device fabrication and similar electronic structure compared to solutions with an emission range from 423 nm up to 657 nm (red), demonstrating the possibility of tuning the energy levels by chemical functionalization. We have fabricated and characterized single-layer solution processed organic light emitting diodes (OLED) to investigate the influence on transport and emission properties of the substituting species. We analyzed the I–V response using a single-carrier numerical model that includes injection barriers and non-uniform electric-field across the layer. As a result, we obtained the electric field dependence of the mobility for each device. Best results are obtained on the most electron rich derivative functionalized with six donor methoxy groups. This material shows the highest emission efficiency in solid state, due to aggregation-induced enhancement, and better transport properties with the highest mobility and a very low turn-on voltage of 2.8 V. The solution processed OLED devices produce stable deep blue (CIE coordinates (0.16, 0.16)) to white (CIE coordinates (0.33, 0.3)) emission with similar luminous efficiencies.     

Analog circuits optimization based on evolutionary computation techniques

This paper presents a new design automation tool, based on a modified genetic algorithm kernel, in order to improve efficiency on the analog IC design cycle. The proposed approach combines a robust optimization with corner analysis, machine learning techniques and distributed processing capability able to deal with multi-objective and constrained optimization problems. The resulting optimization tool and the improvement in design productivity is demonstrated for the design of CMOS operational amplifiers.     

CWDM Metropolitan Multiple-Access Ring Network Based on Optical Packet Witching

We present a novel CWDM metropolitan multiple-access ring network based on optical switching of packets according to their wavelength. Each node within the MAN is identified by a combination of wavelength and numerical address. Hence, nodes are able to drop packets presenting a particular wavelength and numerical address, but can insert packets in any wavelength into the ring. This configuration allows wavelength sharing, as several nodes are identified by the same wavelength (but different numerical addresses), and simplifies switching requirements since the set of numerical addresses is reduced. We analyze the viability and scalability of such a network, determining the number of nodes supported by the network under different traffic scenarios and wavelength resources. The impact of switching time on network performance is also analyzed in order to determine which switching technology should be employed when implementing the network. An erratum to this article is available at .