Preparation and properties of high molecular weight poly(1-germa-) or poly(1-sila-cis-pent-3-enes)

High molecular weight poly(1,1-dimethyl-1-germa-cis-pent-3-ene), poly(1,1-diphenyl-1-germa-cis-pent-3-ene), poly(1,1-dimethyl-1-sila-cis-pent-3-ene), and poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) have been prepared. The thermal stability of these polymers is found to increase with their molecular weight.     

Effect of refining on the phenolic composition of crude olive oils

By definition, virgin olive oil is consumed unrefined, although a great proportion of the olive oil produced has to be refined to render it edible. Phenolic compounds are among the substances eliminated during the refining process; in the present work these were characterized by HPLC, and their evolution during the different refining steps was studied. The complete refining process removed most polyphenols from oils, but the behavior of individual compounds at each step also was observed. o-Diphenols (hydroxytyrosol, catechol, and hydroxytyrosol acetate) and flavonoids (luteolin and apigenin) were eliminated first during the alkaline treatment. Tyrosol and 4-ethylphenol remained in the oil until the deodorization step. A large amount of phenolic compounds was discovered in the refining by-products such as soapstocks and deodorization distillates. In the latter streams, the concentrations of tyrosol and 4-ethylphenol reached up to 149 and 3720 mg/kg by-product, respectively. This high level of 4-ethylphenol and its well-known strong off-odor can interfere during further processing of the deodorization distillates, and this must be taken into account when deciding what is to become of them. Similarly, the results of this work open the possibility of recovering phenolic compounds from the “second centrifugation olive oils” by adding a new washing step prior to the refining process. By including this new step, the most polar polyphenols, hydroxytyrosol and tyrosol, will diffuse from oil to water and a concentration of up to 1400 mg/L of hydroxytyrosol may be achieved.     

Ambient and High-Temperature Stable Fracture Tests in Ceramics: Applications to Yttria-Partially-Stabilized Zirconia

A new technique that provides stable fracture tests in brittle ceramic materials at room and at high temperature is presented. This technique uses the crack mouth opening displacement signal from a laser extensometer to feed the servo control of a hydraulic testing machine. In this way it is possible to obtain—in addition to the fracture toughness—the fracture energy and the R -curve, in a single test.     

Processing Strategy for Producing Highly Anisotropic Silicon Nitride

Silicon nitride with a preferred orientation of large elongated grains was obtained by tape casting of raw powder slurry seeded with rodlike β-Si₃N₄ particles, followed by a gas pressure sintering under 1 MPa nitrogen pressure. The large elongated grains developed from seeds lay in planes parallel to the casting direction in a two-dimensional distribution. Increased fracture toughness (11.1 MPa·m^1/2) and bending strength (1100 MPa) were achieved in the direction perpendicular to the grains alignment compared to specimens with a random distribution of elongated grains. Morover, the specimens exhibited a high Weibull modulus of 46 due to the uniform distribution of large grains.     

String analysis by sliding positioning strategy

Discovering frequent factors from long strings is an important problem in many applications, such as biosequence mining. In classical approaches, the algorithms process a vast database of small strings. However, in this paper we analyze a small database of long strings. The main difference resides in the high number of patterns to analyze. To tackle the problem, we have developed a new algorithm for discovering frequent factors in long strings. We present an Apriori-like solution which exploits the fact that any super-pattern of a non-frequent pattern cannot be frequent. The SANSPOS algorithm does a multiple-pass, candidate generation and test approach. Multiple length patterns can be generated in a pass. This algorithm uses a new data structure to arrange nodes in a trie. A Positioning Matrix is defined as a new positioning strategy. By using Positioning Matrices, we can apply advanced prune heuristics in a trie with a minimal computational cost. The Positioning Matrices let us process strings including Short Tandem Repeats and calculate different interestingness measures efficiently. Furthermore, in our algorithm we apply parallelism to transverse different sections of the input strings concurrently, speeding up the resulting running time. The algorithm has been successfully used in natural language and biological sequence contexts.     

I3WSN: Industrial Intelligent Wireless Sensor Networks for indoor environments

Sensor Web Enablement (SWE) technologies have been successfully applied to a great variety of outdoor scenarios but, in practical terms, little effort has been applied for indoor environments, and even less in the field of industrial applications. This article presents an intelligent SWE application for an indoor and industrial scenario, with the aim of improving and increasing the levels of human safety. The base low-level architecture is built on top of wireless sensor networks (WSN) connected to a Sensor Observation Service (SOS). Higher layers in the architecture include services that make real time decisions based on the collected data. Both simulation and experimental results are presented. The paper shows the viability of our approach in terms of performance, scalability, modularity and safety.     

Towards an Environmentally Acceptable Heterogeneous Catalytic Method of Producing Adipic Acid by the Oxidation of Hydrocarbons in Air

A survey is given of the catalytic methods potentially available for the production of adipic acid by the oxidation of readily available hydrocarbon precursors under environmentally benign conditions. Encouraging results are reported using H₂O₂ as oxidant and microporous FeAlPO-5 as catalyst at moderate temperatures.     

Methanol Selective Oxidation to Formaldehyde over Iron-Molybdate Catalysts

This review deals with the important industrial reaction of formaldehyde manufacture by methanol oxidation over iron molybdate catalysts. Detailed reference is made to the used catalyst, preparation techniques (coprecipitation, sol-gel like, mechanical mixing, etc.) including unsupported and supported catalysts, promoters and characterization methods. The controversial active phase assignment (stoichiometric versus Mo rich iron molybdate) is discussed. The proposed reaction mechanisms and kinetic laws for the main and side reactions are examined. The catalyst deactivation processes are reviewed and the role of Mo excess on these processes is underlined. Finally conclusions and perspectives are presented.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

The Yuma Desalting Plant

The 96 million gallon per day Yuma desalting plant is part of a complex project intended to solve a long standing water quality problem between the United States and Mexico. Designed to treat up to 129,000 acre-feet of 3200 mg/l irrigation return flows, the plant will deliver 283 mg/l product water to maintain a 115 mg/l differential between water delivered to U.S. users and to Mexico .

Design of the plant was preceded by an extensive research program to determine pretreatment requirements, membrane performance, plant capacity and equipment and instrumentation performance. Two pretreatment systems were tested. Partial lime softening followed by multi-media filtration was chosen for the final design. Nine membrane systems (both reverse osmosis and electrodialysis) were tested. Two spiral wound reverse osmosis systems were chosen as most efficient from physical and economic viewpoint, and contracts for site preparation and construction of the intakes and sedimentation basin is scheduled for award summer 1979 with construction of the main plant and installation of desalting equipment scheduled for award summer of 1980.

Based on January 1979 prices, total cost of the desalting complex is approximately $190 million (including interest during construction). The investment cost per daily gallon of installed capacity is approximately $2. per 1000 gallons of desalted water (capital amortization plus operation and maintenance) is $0.77.