Distribution of ytterbium (Yb) in cells of Streptomyces sp. YB-1 which can accumulate Yb, and reusability of cells and cell membrane as bioadsorbent for Yb

The cells of Streptomyces sp. YB-1 adsorbed 4-6 mg ytterbium (Yb) per g dry weight. The Yb contents of the cell wall fraction, cell-free extract, and cell membrane fraction were 11%, 2%, and 87%, respectively. The Yb content in the cell membrane fraction was 20-25 mg per g dry weight. The adsorbed Yb could be quantitatively desorbed by treating the cell membrane fraction with 1 mM EDTA and 1 M HCl at 37 degrees C for 4 h. Treatment with 1 M NaOH caused Yb desorption to some extent. Treatments with proteinase K, lysozyme, 0.5% Triton X-100, 0.4% sodium dodecyl sulfate, and 1 M NaCl did not cause Yb desorption. Elemental analysis of Yb-adsorbed materials after removal of proteins and then extraction of lipids from the membrane fraction revealed that the molar ratio of Yb and P in the materials was about 1:1. The cells and the membrane fraction could be used repeatedly as a bioadsorbent for Yb.     

Purification and characterization of an extracellular beta-agarase from Bacillus sp. MK03

A new beta-agarase was purified from an agarolytic bacterium, Bacillus sp. MK03. The enzyme was purified 129-fold from the culture supernatant by ammonium sulfate precipitation, anion exchange and gel filtration column chromatographic methods. The purified enzyme appeared as a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Estimation of the molecular mass by SDS-PAGE and gel filtration gave values of 92 kDa and 113 kDa, respectively. The N-terminal amino acid sequence of the enzyme showed no homology to those of other known agarases. The optimum pH and temperature for this enzyme were 7.6 and 40 degrees C, respectively. The predominant hydrolysis product of agarose by this enzyme was neoagarotetraose, indicating the cleavage of beta-1,4 linkage. This enzyme could hydrolyze neoagarohexaose to produce neoagarotetraose and neoagarobiose; it could not hydrolyze these products. The enzyme digested agarose by endo-type hydrolysis.     

Effect of grain size distribution on the strength of porous Si3N4 ceramics composed of elongated β-Si3N4 grains

The grain size distributions (diameter and aspect ratio) of porous Si₃N₄ ceramics composed of elongated -Si₃N₄ grains were evaluated statistically, and their effect on the pore size distribution and the flexural strength of the porous Si₃N₄ was investigated. Porous Si₃N₄ ceramics having porosities of 27 to 43% and median pore diameters of 0.56 to 0.96 m were used as specimens. The grain diameter distribution was well correlated to the pore size distribution of the porous Si₃N₄ ceramics. We concluded that the strength of the porous Si₃N₄ ceramics increased with increasing grain length of -Si₃N₄ as well as with decreasing porosity.     

Cloning of a cDNA encoding the human transforming growth factor-beta type II receptor: heterogeneity of the mRNA

A combined study of anterograde axonal degeneration and Golgi electron microscopic technique was designed to examine the distribution and density of axon terminals from the mediodorsal thalamic nucleus (MD) over layer III pyramidal cells in the prelimbic cortex of the rat. The reconstructive analysis of serial ultrathin sections of gold-toned apical and basal dendrites of layer III pyramidal cells showed that degenerating thalamocortical axon terminals from MD formed asymmetrical synaptic contacts predominantly with dendritic spines of the identified basal dendrites as well as apical dendrites. There was little difference in the numerical density of thalamocortical synapses from MD per unit length of both apical and basal dendrites.     

Photo response analysis in CCD image sensors with a VOD structure

Photo response in CCD image sensors with Vertical-Overflow-Drain (VOD) was analyzed in an attempt to discover a way to lessen the photo response rise that accompanies increasing incident light intensity in the saturation region. A photo response analysis based on transistor I-V characteristics revealed that the extent of rise in the saturation region is uniquely determined by the non-ideality factor and temperature. Calculation of the non-ideality factor and its dependence on P-well impurity concentration and layer thickness further revealed that fabrication of P-wells with lower impurity concentrations and thicker layers would be effective in suppressing photo response rise     

Microstructure and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials Fabricated by Interfacial Control

Carbon substrates were coated completely with a molten silicate glass, where the wettability of carbon to glass was improved by infiltration and pyrolysis of perhydropolysilazane. Microstructures of the carbon–glass interface were dependent on P n ₂ during coating. Coating at lower P n ₂ induced the formation of cristobalite at the carbon–glass interface. When the coating was performed at higher P n ₂, the glass and carbon were strongly adhered, without the formation of cristobalite. Coating at higher P n ₂ improved the thermal shock resistance of the glass layer, because crack initiation was not induced by the phase transformation of cristobalite during the cooling process. In the case of coating at higher P n ₂, an oxynitride glass layer was formed at the glass subsurface by dissolution of N₂. A porous glass subsurface layer with uniform spherical micro-pores could be produced by soaking near the glass transition temperature in a steam environment. The porous layer with fine and homogeneous microstructure acts as a thermal shock absorbing layer, so that glass-coated carbon with a porous glass layer has excellent thermal shock resistance in addition to steam oxidation resistance.     

Ytterbium-decreasing Streptomyces sp. and its naphthoquinone-pigment production in the presence of rare-earth elements

We screened for oligotrophic microorganisms capable of decreasing the concentration of ytterbium (Yb), a representative of the heavy rare-earth elements, in a culture medium. From 476 strains of oligotrophic microorganisms (grown on 1/100 diluted nutrient agar) isolated from soil and river water samples, 5 strains capable of reducing the concentration of Yb in diluted nutrient broth containing 5 ppm Yb were selected. Among them, a strain capable of reducing the concentration of all rare-earth elements to a great extent was identified as Streptomyces sp. (strain YB-1). This strain produced redish-purple pigment(s) only in the presence of rare earths, but not in that of other metals. The pigment was extracted with ethyl acetate and purified by a series of column chromatography steps. From the results of structural analysis using ultraviolet or infrared absorption spectrometry and 13C-NMR, the pigment was determined to be a kind of naphthoquinone similar to nanaomycin produced by a Streptomyces sp. These results suggested that rare earths might affect the physiological activity of this strain.     

Bis-(monoacylglyceryl) phosphate and acyl phosphatidylglycerol isolated from human livers of lipidosis induced by 4,4′-diethylaminoethoxyhexesterol

Bis-(monoacylglyceryl) phosphate and acyl phosphatidylglycerol were isolated from the liver of two patients with lipidosis induced by 4,4′-diethylaminoethoxyhexesterol. Identification was based upon the results of alkaline hydrolysis, acetolysis, IR spectrometry, and upon the determination of molar ratio of phosphorus-glycerol-ester. The contents of the bis-(monoacylglyceryl) phosphate were 10 and 16% total phospholipid phosphorus in them. The bis-(monoacylglyceryl) phosphate contained mainly docosahexaenoic (42%), oleic (29%), and linoleic acid (14%) and had the hemolytic activity of ca. one-eighth lysolecithin from egg yolk. Acidic lipids from the liver also were found to contain a lipid which is less polar than bis-(monoacylglyceryl) phosphate. The results of lipid analysis showed that the lipid possessed the structure of an acyl phosphatidylglycerol, and its content was ca. 2% total phospholipid phosphorus. Accumulation of 4,4′-diethylaminoethoxyhexesterol and its derivatives was found in clinical cases by thin layer chromatography and IR spectrometry. This fact suggested that human liver has an ability to metabolize the drug.     

Three-dimensional display of the bronchi using helical CT

The purpose of this study was to evaluate the clinical usefulness of three-dimensional (3D) images of the bronchi obtained using helical CT. Thirteen patients with lung cancer, one with tracheal diverticulum, and one with bronchial amyloidosis were examined. The CT scanner employed was the Toshiba Xforce. The helical CT scan cycle consisted of 20 continuous rotations, each requiring 1.5 sec, for a total scanning time of 30 sec. Scans were obtained using a 5-mm X-ray beam width, a 5-mm/1.5 sec couchtop sliding speed, and a 2-mm reconstruction interval. 3D images were reconstructed using a CEMAX VIPstation. The optimal lower and upper threshold CT values for 3D images of the bronchi were -650 and -100 HU, respectively, and 3D images clearly depicted endobronchial lesions. Cartilage crescents were also demonstrated, but longitudinal and circular mucosal folds could not be visualized. In conclusion, 3D images of the bronchi acquired using helical CT were useful in evaluating endobronchial lesions.