Separation–permeation performance of porous Si3N4 ceramics composed of columnar β-Si3N4 grains as membrane filters for microfiltration

The separation–permeation performance of porous silicon nitride (Si₃N₄) ceramics (consisting of columnar grains connected at random in three dimensions) as membrane filters was evaluated, and compared with commercial Al₂O₃ membranes having a three-layer structure. Si₃N₄ membranes separate particles with diameters much less than their pore diameters. The permeability of Si₃N₄ membranes with separability values the same as those of the Al₂O₃ membranes was about 1.3–2.4 times as large as the Al₂O₃ membranes. Dead-end filtration examination, using Al₂O₃ particles with a particle size distribution, indicated that the Si₃N₄ membrane filtration mechanism obeyed the cake filtration mechanism although the particle size was smaller than the pore size of the Si₃N₄ membranes.     

Algorithm for the surgical treatment of malignant lesions of the proximal tibia

Complications are common among patients treated for malignant lesions of the proximal tibia and can be difficult to manage. This investigation was a retrospective review of 40 patients treated with total knee replacements after proximal tibial resections. Various reconstructive methods were used to fix the prosthetic stems, reestablish the extensor mechanism, and provide soft tissue coverage. Thirty-one patients had adequate followup to allow for review of prosthetic outcome (means, 78 months; range, 25-193 months). Seven patients died with less than 2 years followup, and two patients had postoperative acute infections treated by early amputation to allow chemotherapy to resume promptly. The overall 5-, 8-, and 12-year event free prostheses survival rates were 62%, 33%, and 16%, respectively. Prognostic factors for prosthetic survival were analyzed (age, gender, type of excision, type of prosthesis, type of fixation, and percent of bone resected). None were statistically significant. Patients with less than 40% of the tibia resected had better prosthetic survival at 5 years. The durability of uncemented stem fixation exceeded that of cemented stems. Expected survival of prostheses after revision was 52% at 8 years. The major cause of limb loss was infection. Failure to reconstruct soft tissues satisfactorily caused most failures. Aggressive multistage management of infection is needed. Prosthetic knee replacement is most suitable for patients with cancers that require chemotherapy and for those patients who have short potential survival.     

Giant electric double-layer capacitance of heavily boron-doped diamond electrode

The physical and electrochemical properties of boron-doped polycrystalline diamond electrodes, prepared with various B/C ratio, i.e., 0.1%, 0.5% (BDD-A), 1% (BDD-B), and 5% (BDD-C), were investigated. Electrochemical measurements of the heavily boron-doped films (BDD-C) showed giant electric double-layer capacitance and activity which is significantly larger than BDD-A and BDD-B as well as glassy carbon electrodes. However, interestingly, actual boron concentration of BDD-C was observed to be almost the same as that of BDD-B by secondary ion mass spectroscopy (SIMS) and glow discharge optical emission spectroscopy (GDOES) analysis. It is suggested that the large capacitance is due to a few sp²-bonded carbon impurities, which was observed only in BDD-C, although the amount of the sp²-bonded nondiamond species are very small. In the present work, the reason for the interesting electrochemical properties of heavily boron-doped diamond electrodes is discussed. Furthermore, dimensional stability of the electrodes was also confirmed by conducting harsh anodic treatment.     

Production of Ceramic Green Bodies Using a Microwave-Reactive Organic Binder

Because the pyrolysis of organic substances can result in the emission of harmful pollutant gases, a reduction in the use of organic binders is one aim of today's ceramics industry. A novel ceramic-forming process was developed that requires considerably less organic binder than conventional techniques. The process involves immobilizing reactive molecules on the surfaces of the particles, which on subsequent irradiation with microwaves, form bridges that bind the entire particle assembly together. The chemical forces involved produce strong bonds, resulting in a significant reduction in the amount of organic binder that is required to maintain the shape of the ceramic green body. This method will help to decrease emissions of harmful gases produced from pyrolysis of the binder.     

Creation of Ultra-precision Microstructures with High Aspect Ratios

In recent years, ultra-precision micromachining technology has been used in a variety of fields such as optical instruments, electronic devices, medical equipments, etc. At present, it is essential to meet the requirement of producing various shapes, one of which is a structure with a high aspect ratio. Such structures are applied, for example, to a shaft of micro robot, a long part of microactuator and micromachine, a microneedle for syringe, etc. However, due to its fragile nature, it is extremely difficult to fabricate the structure with a high aspect ratio since it is easily damaged during cutting. It is intended to produce micro towers with high aspect ratios by applying the ultra-precision milling technology using a single crystal diamond cutting tool. The method enables accurate creation of a variety of microstructures with high aspect ratios. In addition, the study also proposes a new machining method to create microneedle arrays, avoiding the contact of cutting edge with already machined parts again. As a result, it is concluded that the proposed method has the potential of producing a variety of microstructures with high aspect ratios.     

Mobility and distribution of cadmium, nickel and zinc in contaminated soil profiles from Bangladesh

We investigated the mobility and distribution of cadmium (Cd), nickel (Ni) and zinc (Zn) in four contaminated soil profiles from Bangladesh. The sources of contamination of these profiles were tannery wastes, city sewage and the wastes of pharmaceutical and paper mill factories at different locations in Bangladesh. The samples were collected from the A-, B- and C-horizons of each profile: two sub-samples from the A-horizon at depths of 0–5 cm (A1) and >5 cm (A2), and one sample each from the B- and C-horizons. Soil samples were analysed for total metal content by dissolution in aqua regia followed by sequential extraction of the fractions based on their varying solubility. There were six operationally defined groups of extraction sequences: water soluble (F1), exchangeable (F2), carbonate (F3), oxide (F4), organic (F5) and residual (F6). The total concentration of Cd, Ni and Zn in the A-horizon (0–5 cm) ranged from 0.10 to 0.62, from 31 to 54 and from 85 to 838 mg kg⁻¹, respectively. In the B- and C-horizons, the concentrations of these metals decreased many fold, particularly in the city sewage profile where the decrease for Cd and Zn was approximately fourfold. The distribution of metals among the chemical fractions depended on their total concentrations. In the A1-horizon, Cd had the highest mobility factor [MF = (F1+F2+F3)/(F1+F2+F3+F4+F5+F6) × 100] at 41–43% and Ni had the lowest at 3–13%, while Zn, showed intermediate values at 8–25%. The MF decreased with depth in all soil profiles. Among the fractions, the residual fraction contained the lowest levels of Cd but the highest levels of Ni and Zn. This state affected their relative mobility and distribution in soil profiles. Of the soil profiles, the mobility of all metals was higher in the city sewage soil than in any of the other three soils investigated, suggesting that the former may create a health risk by contaminating agricultural products and ground water as it also contained higher amounts of Cd and Zn.     

Plasma etching treatment for surface modification of boron-doped diamond electrodes

Boron-doped diamond (BDD) thin film surfaces were modified by brief plasma treatment using various source gases such as Cl₂, CF₄, Ar and CH₄, and the electrochemical properties of the surfaces were subsequently investigated. From X-ray photoelectron spectroscopy analysis, Cl and F atoms were detected on the BDD surfaces after 3 min of Cl₂ and CF₄ plasma treatments, respectively. From the results of cyclic voltammetry and electrochemical AC impedance measurements, the electron-transfer rate for Fe(CN)₆^3−/4− and Fe^2+/3+ at the BDD electrodes was found to decrease after Cl₂ and CF₄ plasma treatments. However, the electron-transfer rate for Ru(NH₃)₆^2+/3+ showed almost no change after these treatments. This may have been related to the specific interactions of surface halogen (C-Cl and C-F) moieties with the redox species because no electrical passivation was observed after the treatments. In addition, Raman spectroscopy showed that CH₄ plasma treatment of diamond surfaces formed an insulating diamond-like carbon thin layer on the surfaces. Thus, by an appropriate choice of plasma source, short-duration plasma treatments can be an effective way to functionalize diamond surfaces in various ways while maintaining a wide potential window and a low background current.     

Cloning of a cDNA encoding the human transforming growth factor-beta type II receptor: heterogeneity of the mRNA

A combined study of anterograde axonal degeneration and Golgi electron microscopic technique was designed to examine the distribution and density of axon terminals from the mediodorsal thalamic nucleus (MD) over layer III pyramidal cells in the prelimbic cortex of the rat. The reconstructive analysis of serial ultrathin sections of gold-toned apical and basal dendrites of layer III pyramidal cells showed that degenerating thalamocortical axon terminals from MD formed asymmetrical synaptic contacts predominantly with dendritic spines of the identified basal dendrites as well as apical dendrites. There was little difference in the numerical density of thalamocortical synapses from MD per unit length of both apical and basal dendrites.     

Transformation in vitro of a nontumorigenic rat urothelial cell line by hydrogen peroxide

Chronic infection/inflammation of the urinary tract is a significant risk factor for the development of bladder cancer. The present study examined the hypothesis that hydrogen peroxide (H202) and cytokines released during inflammation are involved in the enhancement of bladder carcinogenesis. Using growth in soft agar and tumorigenicity in athymic nude mice as indices of transformation, we examined the effect of H202 and cytokines on the enhancement of N-methyl-N-nitrosourea (MNU)-initiated transformation of MYP3 cells, an anchorage-dependent nontumorigenic rat bladder epithelial cell line. MYP3 cells pretreated with or without MNU were exposed to H202 (0.001 to 0.1 mM) daily for 1 week in monolayer culture and were then tested for growth in soft agar. A marked increase in colony numbers was observed in the cells that were MNU-initiated and exposed to H202 (P < 0.01). Furthermore, H202 exposure alone at 0.01 mM or 0.1 mM caused colony formation in soft agar. The transformants induced by MNU plus H202 or H202 alone formed high-grade transitional cell carcinomas when injected into nude mice. The growth of these transformants was stimulated by several cytokines (interleukin 1alpha, interleukin 6, and tumor necrosis factor-alpha) better than the parental cells both on a plastic surface and in soft agar. Our results indicate that H202 causes genetic change(s) to induce tumorigenic conversion in urothelial cells and that the transformants are stimulated to grow because of their selective response to several cytokines. We suggest that these mechanisms may be involved in the in vivo carcinogenesis associated with chronic urinary tract infection.