Multipath optimized link state routing for mobile ad hoc networks

Multipath routing protocols for Mobile Ad hoc NETwork (MANET) address the problem of scalability, security (confidentiality and integrity), lifetime of networks, instability of wireless transmissions, and their adaptation to applications.Our protocol, called MultiPath OLSR (MP-OLSR), is a multipath routing protocol based on OLSR [1]. The Multipath Dijkstra Algorithm is proposed to obtain multiple paths. The algorithm gains great flexibility and extensibility by employing different link metrics and cost functions. In addition, route recovery and loop detection are implemented in MP-OLSR in order to improve quality of service regarding OLSR. The backward compatibility with OLSR based on IP source routing is also studied. Simulation based on Qualnet simulator is performed in different scenarios. A testbed is also set up to validate the protocol in real world. The results reveal that MP-OLSR is suitable for mobile, large and dense networks with large traffic, and could satisfy critical multimedia applications with high on time constraints.     

Highly Stretchable Conducting SIBS‐P3HT Fibers

Poly(styrene‐β‐isobutylene‐β‐styrene)‐poly(3‐hexylthiophene) (SIBS‐P3HT) conducting composite fibers are successfully produced using a continuous flow approach. Composite fibers are stiffer than SIBS fibers and able to withstand strains of up 975% before breaking. These composite fibers exhibit interesting reversible mechanical and electrical characteristics, which are applied to demonstrate their strain gauging capabilities. This will facilitate their potential applications in strain sensing or elastic electrodes. Here, the fabrication and characterization of highly stretchable electrically conducting SIBS‐P3HT fibers using a solvent/non‐solvent wet‐spinning technique is reported. This fabrication method combines the processability of conducting SIBS‐P3HT blends with wet‐spinning, resulting in fibers that could be easily spun up to several meters long. The resulting composite fiber materials exhibit an increased stiffness (higher Young’s modulus) but lower ductility compared to SIBS fibers. The fibers’ reversible mechanical and electrical characteristics are applied to demonstrate their strain gauging capabilities.     

Human hemolysate glycated proteome

Despite continuous advances in hyperglycemia treatments, a precise control through monitoring of glucose and glycated hemoglobin remains in most diabetic patients as the diagnosis/prognosis tool. An alternative perspective could be the discovery and quantitation of new blood glycated proteins formed by nonenzymatic reaction with circulatory glucose. As a result, the human hemolysate is an incomparable source of glycated proteins to further monitor glycemia and interpret changes at the level of this post-translational modification. The human hemolysate is here studied based on the differential labeling of proteins with isotopically labeled-glucose ([(13)C(6)] glucose), named glycation isotopic labeling. Due to the chemoselectivity of glycation, only preferential targets are labeled by this protocol. The approach provides qualitative data through the detection of preferential protein glycation sites as well as quantitative information to evaluate the abundance of this modification. This strategy was applied to human hemolysate samples corresponding to different glycemic states estimated by laboratory-certified concentrations of glycated hemoglobin. The glycation level of each protein can then be employed to interpret the effect of glucose exposition as a consequence of glycemic unbalance. This information should provide new molecular insights into protein glycation mechanisms that might generate a new hypothesis to clinicians to improve the understanding of underlying pathologies associated to prolonged hyperglycemia.     

Design and validation of a high-throughput matrix-assisted laser desorption ionization time-of-flight mass spectrometry method for quantification of hepcidin in human plasma

Disorders of iron metabolism affect over a billion people worldwide. The circulating peptide hormone hepcidin, the central regulator of iron distribution in mammals, holds great diagnostic potential for an array of iron-associated disorders, including iron loading (β-thalassemia), iron overload (hereditary hemochromatosis), and iron deficiency diseases. We describe a novel high-throughput matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry assay for quantification of hepcidin in human plasma. This assay involves enrichment using a functionalized MALDI chip, a novel solvent-detergent precipitation buffer, and quantification using a stable isotope labeled internal standard. The linear range of hepcidin in plasma was 1-120 nM, with a low limit of quantification (LOQ) (1 nM), high accuracy (<15% relative error (RE)), and high precision (intraday average 5.52-18.48% coefficient of variation (CV) and interday 9.32-14.83% CV). The assay showed strong correlation with an established hepcidin immunoassay (Spearman; R(2) = 0.839 n = 93 ethylenediaminetetraacetic acid (EDTA) plasma). A collection of normal healthy pediatric samples (range 3.8-32.5 ng/mL; mean 12.9 ng/mL; n = 119) showed significant differences from an adult collection (range 1.8-48.7 ng/mL; mean 16.1 ng/mL; n = 95; P = 0.0096). We discuss these preliminary reference ranges and correlations with additional parameters in light of the utility and limitations of hepcidin measurements as a stand-alone diagnostic and as a tool for therapeutic intervention.     

Quasi-simultaneous acquisition of hard electron ionization and soft single-photon ionization mass spectra during GC/MS analysis by rapid switching between both ionization methods: analytical concept, setup, and application on diesel fuel

This work describes the realization of rapid switching between hard electron ionization (EI) and soft single-photon ionization (SPI) integrated in a compact orthogonal acceleration time-of-flight mass spectrometer. Vacuum-ultraviolet (VUV) photons of 9.8 eV (126 nm) emitted from the innovative electron-beam-pumped rare-gas excimer light source (EBEL) filled with argon are focused into the ion chamber by an ellipsoidal mirror optic for accomplishing of SPI. This novel orthogonal acceleration time-of-flight mass spectrometer with switching capability was hyphenated to one-dimensional gas chromatography (GC) and comprehensive two-dimensional (2D) gas chromatography (GC × GC) for the first time. Within this demonstration study, a maximum switching frequency of 80 Hz was applied for investigation of a mineral-oil-type diesel sample. This approach allows the quasi-simultaneous acquisition of complementary information about the fragmentation pattern (EI) as well as the molecular mass (SPI) of compounds within a single analysis. Furthermore, by application of a polar GC column for separation, the SPI data can be displayed in a 2D contour plot, leading to a comprehensive 2D characterization (GC × MS), whereas the typical group-type assignment for diesel is also met.     

Terahertz tomographic imaging of XVIIIth Dynasty Egyptian sealed pottery

A monochromatic millimeter-wave imaging system coupled with an infrared temperature sensor has been used to investigate historic objects preserved at the Museum of Aquitaine (France). In particular, two-dimensional and three-dimensional analyses have been performed in order to reveal the internal structure of nearly 3500-year-old sealed Egyptian jars.     

Twin mirrors for laser interferometric gravitational-wave detectors

Gravitational-wave detectors such as Virgo and the laser interferometric gravitational-wave observatory (LIGO) use a long-baseline Michelson interferometer with Fabry-Perot cavities in the arms to search for gravitational waves. The symmetry between the two Fabry-Perot cavities is crucial to reduce the interferometer's sensitivity to the laser amplitude and frequency noise. To this purpose, the transmittance of the mirrors in both cavities should be as close as possible. This paper describes the realization and the characterization of the first twin large low-loss mirrors with transmissions differing by less than 0.01%.     

Reducing the diffraction artifacts while implementing a phase function on a spatial light modulator

Spatial light modulators are often used to implement phase modulation. Since they are pixelated, the phase function is usually approximated by a regularly sampled piecewise constant function, and the periodicity of the pixel sampling generates annoying diffraction peaks. We theoretically investigate two pixelation techniques: the isophase method and a new nonperiodic method derived from the Voronoi tessellation technique. We show that, for a suitable choice of parameters, the diffraction peaks disappear and are replaced by a smoothly varying halo. We illustrate the potential of these two techniques for implementing a lens function and wavefront correction.     

The temporary permanence of Dominican bodegueros in Philadelphia: neighbourhood development in an era of transnational mobility

The relationship between "neighbourhood" and "community" is contentious: while neighbourhoods are spatially based, communities are more amorphous institutions that are connected to local places through far-flung transnational networks. Dominican corner-store owners (bodegueros) in Philadelphia, USA, understand their role in their local neighbourhood community as a form of "temporary permanence" because their economic development model involves building networks between the US and the Dominican Republic. The mobility practices of grocers and interviews with community leaders in Philadelphia are used to make two propositions about constructions of place-based "neighbourhood communities" in the US: the mobility of the grocers highlights the spatial entrapment experienced by other urban residents and thus their embrace of place-based communities; and, in the mobility of the grocers and conversations with some neighbourhood leaders, we see actualised a more fluid and expansive understanding of the concept of a "neighbourhood community" which is embedded in transnational networks.     

Engineering of an MBR supernatant fouling layer by fine particles addition: a possible way to control cake compressibility

For membrane bioreactors (MBR) applied to wastewater treatment membrane fouling is still the prevalent issue. The main limiting phenomena related to fouling is a sudden jump of the transmembrane pressure (TMP) often attributed to the collapse of the fouling layer. Among existing techniques to avoid or to delay this collapse, the addition of active particles membrane fouling reducers (polymer, resins, powdered activated carbon (PAC), zeolithe…) showed promising results.Thus the main objective of this work is to determine if fouling can be reduced by inclusion of inert particles (500 nm and inert compared to other fouling reducers) and which is the impact on filtration performances of the structuring of the fouling. Those particles were chosen for their different surface properties and their capability to form well structured layer.Results, obtained at constant pressure in dead end mode, show that the presence of particles changes foulant deposition and induces non-compressible fouling (in the range of 0.5-1 bar) and higher rejection values compared to filtration done on supernatant alone. Indeed dead end filtration tests show that whatever interactions between biofluid and particles, the addition of particles leads to better filtration performances (in terms of rejection, and fouling layer compressibility). Moreover results confirm the important role played by macromolecular compounds, during supernatant filtration, creating highly compressible and reversible fouling.In conclusion, this study done at lab-scale suggests the potential benefit to engineer fouling structure to control or to delay the collapse of the fouling layer. Finally this study offers the opportunities to enlarge the choice of membrane fouling reducers by taking into consideration their ability to form more consistent fouling (i.e. rigid, structured fouling).