Performance evaluation of a water/silicone oil two‐phase partitioning bioreactor using Rhodococcus erythropolis T902.1 to remove volatile organic compounds from gaseous effluents

BACKGROUND: In the framework of biological processes used for waste gas treatment, the impact of the inoculum size on the start‐up performance needs to be better evaluated. Moreover, only a few studies have investigated the behaviour of elimination capacity and biomass viability in a two‐phase partitioning bioreactor (TPPB) used for waste gas treatment. Lastly, the impact of ethanol as a co‐substrate remains misunderstood. RESULTS: Firstly, no benefit of inoculation with a high cellular density (>1.5 g L^?1) was observed in terms of start‐up performance. Secondly, the TPPB was monitored for 38 days to characterise its behaviour under several operational conditions. The removal efficiency remained above 63% for an inlet concentration of 7 g isopropylbenzene (IPB) m^?3 and at some time points reached 92% during an intermittent loading phase (10 h day^?1), corresponding to a mean elimination capacity of 4 × 10^?3 g L^?1 min^?1 (240 g m^?3 h^?1) for a mean IPB inlet load of 6.19 × 10^?3 g L^?1 min^?1 (390 g m^?3 h^?1). Under continuous IPB loading, the performance of the TPPB declined, but the period of biomass acclimatisation to this operational condition was shorter than 5 days. The biomass grew to approximately 10 g L^?1 but the cellular viability changed greatly during the experiment, suggesting an endorespiration phenomenon in the bioreactor. It was also shown that simultaneous degradation of IPB and ethanol occurred, suggesting that ethanol improves the biodegradation process without causing oxygen depletion. CONCLUSION: A water/silicone oil TPPB with ethanol as co‐substrate allowed the removal of a high inlet load of IPB during an experiment lasting 38 days. Copyright © 2008 Society of Chemical Industry     

Ventilatory response to severe acute hypoxia in guinea-pigs and rats with high hemoglobin-oxygen affinity induced by cyanate

Laparoscopic pelvic lymph node dissection has been applied as a minimally invasive staging technique for men with prostate cancer. This procedure has been shown to shorten markedly postoperative hospitalization, decrease analgesic requirements and shorten convalescence period compared to open pelvic node dissection. However, the laparoscopic procedure takes longer to perform and many disposable instruments are used, thus increasing the cost. We determine the overall cost of laparoscopic versus open pelvic lymph node dissection. Between January 1989 and April 1992, 61 men underwent only staging pelvic lymph node dissection for cancer of the prostate at a single university teaching hospital. Of these patients 11 and 50 underwent open and laparoscopic pelvic lymph node dissection, respectively. Information from the hospital business office was reorganized into preoperative, intraoperative and postoperative expenses. All individual charges were transformed up or down to the dollar amounts of the 1990 to 1991 fiscal year so as to correct for inflationary changes. Preoperative costs were not significantly different between the 2 operative approaches. Intraoperative expenses were 52% greater if laparoscopic pelvic lymph node dissection was performed and can be explained by the longer operative times and use of disposable instrumentation. However, the postoperative period lasted an average of 1.61 days following laparoscopic pelvic lymph node dissection. Postoperative nursing and analgesic requirements were significantly more for patients undergoing open pelvic lymph node dissection. The overall postoperative costs following open pelvic lymph node dissection were 280% more expensive than for the laparoscopic procedure. The overall total costs were approximately $1,250 more for laparoscopic pelvic lymph node dissection. Wages lost or earned during this period and rapid return to normal activity following laparoscopic pelvic lymph node dissection would, in our opinion, justify this additional cost.     

Dependence of attenuation in a vegetation canopy on frequency andplant water content

Theory is presented to provide insight into the observation that attenuation through vegetation is proportional to vegetation water content. In this analysis, the canopy is modeled as a sparse layer of randomly oriented particles (leaves, stalks, etc.) over a flat, homogeneous ground plane (soil) and an expression is obtained for the “optical depth”. The formulas developed by Ulaby and El Rayes are used to relate this expression to the water content of the canopy. In the low frequency extreme (Rayleigh scatterers), the attenuation varies almost linearly with water content and inversely with wavelength. In contrast, in the high frequency limit, the attenuation is independent of both water content and frequency, in between, geometry dependent “resonances” occur even at the low frequency end of the microwave spectrum (e.g. L-band) making the dependence of attenuation on frequency and water content specific to canopy architecture     

Multicenter study on the clinical value of fetal pulse oximetry. I. Methodologic evaluation. The French Study Group on Fetal Pulse Oximetry

OBJECTIVE: Our purpose was to evaluate the feasibility of intrapartum fetal pulse oximetry, the distribution of fetal oxygen saturation values, and the relationship with the neonatal outcome in a population with an abnormal fetal heart rate. STUDY DESIGN: A prospective multicenter observational study was performed from June 1994 to November 1995. Fetal oxygen saturation was continuously recorded with use of a Nellcor N-400 fetal pulse oximeter in case of an abnormal fetal heart rate during labor. Simultaneous readings of fetal oxygen saturation and fetal blood analysis were obtained at inclusion and before birth. Feasibility, adverse effects, distribution of fetal oxygen saturation values, and relationship with neonatal outcome were assessed. RESULTS: One hundred seventy-four patients were included. From 172 attempted sensor placements, the procedure was impossible in three cases and fetal oxygen saturation values were obtained in 164 cases (95.3%). Physicians considered sensor placement an easier task than an attempt at fetal blood analysis (easy in 87.5% vs 78.9% for fetal blood analysis, p = 0.03). The mean reliable signal time (+/- SD) was 64.7% +/- 32% during the first stage. There were no serious adverse effects in the study population. The mean fetal oxygen saturation during the first stage of labor was 42.2% +/- 8.0% (10th to 90th percentile range 30% to 53%). Fetal oxygen saturation was significantly correlated with scalp pH (r = 0.29, p = 0.01) but not with neonatal umbilical artery pH or gas values. There was a significant association between low fetal oxygen saturation (< 30%) and poor neonatal condition. CONCLUSION: The feasibility of fetal pulse oximetry is satisfactory in clinical practice. It is easy to use and provides a fair rate of recorded values, even in a population with suspicion of fetal distress. A low fetal oxygen saturation is significantly associated with an abnormal neonatal outcome.     

Erfolgsfaktoren bei der Einführung von Wissensmanagementsystemen in die Praxis

Neben der Gestaltung technischer Systeme zur Unterstützung des Wissensmanagements ist die Ausgestaltung organisatorischer Ma?nahmen gleichbedeutend wichtig.     

Contribution a l'etude du polymorphisme de Ga2S3: Structure cristalline de Mn0,23Ga1,85S3

The Mn_0.23Ga_1.85S₃ phase belongs to the solid solution $\text{ф}{}_0$, stable at low temperature in the Ga₂S₃MnS system. It is hexagonal superstructure of the wurtzite, with the Ga₂S₃α′ type ($\text{a}\text{= 6.397}\text{A}\text{?}$; $\text{c}\text{= 18.027}\text{A}\text{?}$Z = 6; space groupe P6₁ or P6₅). Its crystal structure has been refined by the least squares method to a final R = 0.06 with 323 independant reflections. This structure is closely related to Ga₂S₃ α described by Hahn and Frank, and differs only by the partial occupation of the vacant metal site of Ga₂S₃ by Mn atoms in statistical disorder.     

Floor free 10-Gb/s transmission with directly modulated GaInNAs-GaAs 1.35-/spl mu/m laser for metropolitan applications

Among the new semiconductor materials for telecom devices, the GaInNAs-GaAs structure presents interesting properties for low-cost applications, like high differential gain and high T/sub 0/. Another key aspect of the performance is the behavior of the GaInNAs-GaAs based lasers under high bit rate direct modulation. Here, we demonstrate the dynamic capabilities of GaInNAs-GaAs three-quantum-well ridge structure through 2.5-Gb/s directly modulated laser emission and transmission on standard fiber, in the temperature range 25/spl deg/C-85/spl deg/C. Besides transmission is demonstrated up to 10 Gb/s at 25/spl deg/C on the same fiber, without penalty and bit-error-rate floor.