Using AVAL-1D to simulate avalanches in the eastern Pyrenees

The two friction parameters used in the numerical avalanche dynamics program AVAL-1D, were calibrated empirically with data from observed avalanches in the Swiss Alps. The implementation of the model with these friction parameters in other regions with different characteristics can lead to considerable uncertainty if a previous calibration is not performed. However, direct calibration for a specific avalanche path is often not possible since the data available are insufficient. Therefore, we back-calculated twelve well-documented avalanche events from the Catalan Pyrenees to calibrate the friction coefficients to be used in this mountain range. The result of the study reveals that there is a good fit between recorded and simulated avalanche events using the friction parameters originally calibrated for the Swiss Alps, despite the difference in snow climate between these two mountain ranges.     

Pummelos as Concept Generators for Biomimetically Inspired Low Weight Structures with Excellent Damping Properties

Natural materials often exhibit excellent mechanical properties. An example of outstanding impact resistance is the pummelo fruit (Citrus maxima) which can drop from heights of 10 m and more without showing significant outer damage. Our data suggest that this impact resistance is due to the hierarchical organization of the fruit peel, called pericarp. The project presented in the current paper aims at transferring structural features from the pummelo pericarp to engineering materials, in our case metal foams, produced by the investment casting process. The transfer necessitates a detailed structural and mechanical analysis of the biological model on the one hand, and the identification and development of adequate materials and processes on the other hand. Based on this analysis, engineering composite foam structures are developed and processed which show enhanced damping and impact properties. The modified investment casting process and the model alloy Bi57Sn43 proved to be excellent candidates to make these bio‐inspired structures. Mechanical testing of both the natural and the engineering structures has to consider the necessity to evaluate the impact of the different hierarchical features. Therefore, specimens of largely varying sizes have to be tested and size effects cannot be ignored, especially as the engineering structures might be upscaled in comparison with the natural role model. All in all, the present results are very promising: the basis for a transfer of bio‐inspired structural hierarchical levels has been set.     

Inverse material identification in coupled acoustic-structure interaction using a modified error in constitutive equation functional

This work focuses on the identification of heterogeneous linear elastic moduli in the context of frequency-domain, coupled acoustic-structure interaction (ASI), using either solid displacement or fluid pressure measurement data. The approach postulates the inverse problem as an optimization problem where the solution is obtained by minimizing a modified error in constitutive equation (MECE) functional. The latter measures the discrepancy in the constitutive equations that connect kinematically admissible strains and dynamically admissible stresses, while incorporating the measurement data as additional quadratic error terms. We demonstrate two strategies for selecting the MECE weighting coefficient to produce regularized solutions to the ill-posed identification problem: 1) the discrepancy principle of Morozov, and 2) an error-balance approach that selects the weight parameter as the minimizer of another functional involving the ECE and the data misfit. Numerical results demonstrate that the proposed methodology can successfully recover elastic parameters in 2D and 3D ASI systems from response measurements taken in either the solid or fluid subdomains. Furthermore, both regularization strategies are shown to produce accurate reconstructions when the measurement data is polluted with noise. The discrepancy principle is shown to produce nearly optimal solutions, while the error-balance approach, although not optimal, remains effective and does not need a priori information on the noise level.     

On the sources of methane to the los angeles atmosphere

We use historical and new atmospheric trace gas observations to refine the estimated source of methane (CH(4)) emitted into California's South Coast Air Basin (the larger Los Angeles metropolitan region). Referenced to the California Air Resources Board (CARB) CO emissions inventory, total CH(4) emissions are 0.44 ± 0.15 Tg each year. To investigate the possible contribution of fossil fuel emissions, we use ambient air observations of methane (CH(4)), ethane (C(2)H(6)), and carbon monoxide (CO), together with measured C(2)H(6) to CH(4) enhancement ratios in the Los Angeles natural gas supply. The observed atmospheric C(2)H(6) to CH(4) ratio during the ARCTAS (2008) and CalNex (2010) aircraft campaigns is similar to the ratio of these gases in the natural gas supplied to the basin during both these campaigns. Thus, at the upper limit (assuming that the only major source of atmospheric C(2)H(6) is fugitive emissions from the natural gas infrastructure) these data are consistent with the attribution of most (0.39 ± 0.15 Tg yr(-1)) of the excess CH(4) in the basin to uncombusted losses from the natural gas system (approximately 2.5-6% of natural gas delivered to basin customers). However, there are other sources of C(2)H(6) in the region. In particular, emissions of C(2)H(6) (and CH(4)) from natural gas seeps as well as those associated with petroleum production, both of which are poorly known, will reduce the inferred contribution of the natural gas infrastructure to the total CH(4) emissions, potentially significantly. This study highlights both the value and challenges associated with the use of ethane as a tracer for fugitive emissions from the natural gas production and distribution system.     

Xanthohumol kills B-chronic lymphocytic leukemia cells by an apoptotic mechanism

B-chronic lymphocytic leukemia (B-CLL) is an indolent lymphoid malignancy with variable prognosis. Adverse prognostic factors comprise treatment resistance, cytogenetics (11q- and 17p-), the presence of unmutated Ig genes, and the more comprehensive activation marker Zap 70. In contrast to diminished sensitivity to chemotherapy, Zap 70+ B-CLL cells retain their responsiveness to manipulation of signal transduction and monoclonals. Xanthohumol (XA) has recently been documented to have an impact on breast cancer cell growth and invasiveness in vitro. Based on these observations, lymphocytes from patients with B-CLL were cultured in the presence of XA in vitro. XA induced a dose-dependent killing of B-CLL cells at an LD(50) ((24 h)) of 24.4 +/- 6.6 microM, independent of known adverse prognostic factors including functional loss of p53. Cell death was associated with poly (ADP)-ribose polymerase cleavage and annexin V positivity, suggestive of an apoptotic mechanism. Surprisingly, p 70(S 6 K) phosphorylation was stimulated upon XA treatment. In conclusion, XA has an antitumor activity on B-CLL cells in vitro. The molecular mechanisms behind this pro-apoptotic effect deserve further investigation.     

Selective extraction,structural characterisation and antifungal activity assessment of napins from an industrial rapeseed meal

This article reports an extraction–purification of napins from an industrial rapeseed meal and the assessment of their antimicrobial activity against Fusarium langsethiae. The best extraction conditions are observed at pH 2, 12% (w/w) of rapeseed meal after 15 min of extraction in water at room temperature. Under these conditions the extraction is highly selective, allowing a simple purification process (ammonium sulfate precipitation followed by desalting size exclusion chromatography) to get purified napins. These napins possessed significant anti-Fusarium activity (IC₅₀ = 70 μM) and a compact secondary structure rich in α-helix, which may explain this bioactivity.     

Biochemical characterization and process stability of polyphenoloxidase extracted from Victoria grape (Vitis vinifera ssp. Sativa)

Polyphenol oxidase (PPO) was isolated from Victoria grapes (Vitis vinifera ssp. Sativa) grown in South Africa and its biochemical characteristics were studied. Optimum pH and temperature for grape PPO activity were pH 5.0 and T = 25 °C with 10 mM catechol in McIlvaine buffer as substrate. PPO showed activity using the following substances: catechol, 4 methyl catechol, d, l-DOPA, (+) catechin and chlorogenic acid. K_m and V_max values were 52.6 ± 0.00436 mM and 653 ± 24.0 OD_400 nm/min in the case of 10 mM catechol as a substrate. Eight inhibitors were tested in this study and the most effective inhibitors were found to be ascorbic acid, l-cysteine and sodium metabisulfite. Kinetic studies showed that the thermal inactivation of Victoria grape PPO followed first-order kinetics, with an activation energy, E_a = 225 ± 13.5 of kJ/mol. Both in semipurified extract and in grape juice, PPO showed a pronounced high pressure stability.