Fatigue performance of metastable β titanium alloys: Effects of microstructure and surface finish

This investigation examined the role of microstructure and surface finish on the high cycle fatigue (HCF) performance of TIMETAL LCB (Ti-6.8Mo-4.5Fe-1.5Al). The as-received microstructure of LCB consisted of elongated β grains with a semicontinuous grain boundary α layer. In contrast, a fine equiaxed β + spheroidized α LCB microstructure was achieved by hot swaging and solution (recrystallization) anneal. The latter modification of the prior β grain structure, together with the size, morphology, and distribution of the primary α phase, resulted in a significant enhancement in the tensile and HCF properties. Furthermore, prestraining (PS), as would be expected during the fabrication of an automotive coil spring, and prior to aging for 30 min at temperatures between 500 and 550 °C, led to additional increases in tensile strength. In contrast, the HCF performance was always reduced when PS prior to aging was included in the overall processing procedure. Finally, shot-peening and roller-burnishing both resulted in an increased fatigue life in the finite life regimen; however, significant reductions in the 10⁷ cycle fatigue strengths were observed when these procedures were used. These observations have been explained by including the effect of process-induced residual tensile stresses in the fatigue analysis, resulting in subsurface fatigue crack nucleation. This paper was presented at the Beta Titanium Alloys of the 00’s Symposium sponsored by the Titanium Committee of TMS, held during the 2005 TMS Annual Meeting & Exhibition, February 13–16, 2005 in San Francisco, CA.     

X-ray Microtomography Analysis of the Aluminum Alloy Composite Reinforced by SiC After Friction Stir Processing

Despite many years of using friction stir processing (FSP), there are many unexplained aspects concerning the processes which appear during FSP: determining the direction of flow and mixing of the materials and the degree of mixing and microstructure fragmentation in specific areas. This paper presents the impact of FSP on the micro- and macrostructure of the composite with hypo-eutectic Si matrix reinforced by SiC particles. The analysis of the structure of the processed area in FSP in the relation to the microstructure of the base material has been made using x-ray microtomography. The results of these studies have been juxtaposed with studies using microscopic methods (light microscopy and SEM). The microtomography images revealed an additional separation on the advancing side and the weld nugget, where on the basis of a 3D reconstruction a layer microstructure on the direction of linear movement of the tool has been demonstrated. The analyses have revealed a limited flow of the material above the weld nugget. The main advantages of the research method applied were the possibility to show the invisible or barely visible elements of the microstructure using standard test methods and the ability to analyze the microstructure changes uninterruptedly in different directions in the volume of the material.     

Novel Biomolecules in the Pathogenesis of Gestational Diabetes Mellitus

Gestational diabetes mellitus (GDM) is one of the most common metabolic diseases in pregnant women. Its early diagnosis seems to have a significant impact on the developing fetus, the course of delivery, and the neonatal period. It may also affect the later stages of child development and subsequent complications in the mother. Therefore, the crux of the matter is to find a biopredictor capable of singling out women at risk of developing GDM as early as the very start of pregnancy. Apart from the well-known molecules with a proven and clear-cut role in the pathogenesis of GDM, e.g., adiponectin and leptin, a potential role of newer biomolecules is also emphasized. Less popular and less known factors with different mechanisms of action include: galectins, growth differentiation factor-15, chemerin, omentin-1, osteocalcin, resistin, visfatin, vaspin, irisin, apelin, fatty acid-binding protein 4 (FABP4), fibroblast growth factor 21, and lipocalin-2. The aim of this review is to present the potential and significance of these 13 less known biomolecules in the pathogenesis of GDM. It seems that high levels of FABP4, low levels of irisin, and high levels of under-carboxylated osteocalcin in the serum of pregnant women can be used as predictive markers in the diagnosis of GDM. Hopefully, future clinical trials will be able to determine which biomolecules have the most potential to predict GDM.     

Three Component Composite Scaffolds Based on PCL,Hydroxyapatite, and L-Lysine Obtained in TIPS-SL: Bioactive Material for Bone Tissue Engineering

In this research, we describe the properties of three-component composite foam scaffolds based on poly(ε-caprolactone) (PCL) as a matrix and hydroxyapatite whiskers (HAP) and L-Lysine as fillers (PCL/HAP/Lys with wt% ratio 50/48/2). The scaffolds were prepared using a thermally induced phase separation technique supported by salt leaching (TIPS-SL). All materials were precisely characterized: porosity, density, water uptake, wettability, DSC, and TGA measurements and compression tests were carried out. The microstructure of the obtained scaffolds was analyzed via SEM. It was found that the PCL/HAP/Lys scaffold has a 45% higher Young’s modulus and better wettability compared to the PCL/HAP system. At the same time, the porosity of the system was ~90%. The osteoblast hFOB 1.19 cell response was also investigated in osteogenic conditions (39 °C) and the cytokine release profile of interleukin (IL)-1β, IL-6, and tumor necrosis factor (TNF)-α was determined. Modification of PCL scaffolds with HAP and L-Lysine significantly improved the proliferation of pre-osteoblasts cultured on such materials.     

The Effect of Heat Treatment on the Microstructure and Properties of Explosively Welded Titanium-Steel Plates

This paper describes a study of explosively welded titanium-carbon steel S355J2+N plates. Following the welding, plates underwent heat treatment at temperature of 600 °C for 90 min with cooling in furnace to 300 °C and in air to room temperature. The structure of the bonding was examined by using light, scanning electron (SEM) and transmission electron microscopy. The mechanical properties before and after heat treatment were examined applying three-point bending tests with cyclic loads and hardness measurements. Fracture surfaces were investigated using computer tomography and SEM. It has been found that the bonding areas are characterized by a specific chemical composition, microstructure and microhardness. Between the steel and the Ti cladding, a strongly defected transition zone was formed and melted areas with altered chemical composition were observed. It was also demonstrated that the heat treatment commonly applied to welded steel-Ti plates had a significant and negative impact on the microstructure and mechanical properties of the welded plates due to formation of brittle intermetallic phases.     

Effect of Surface Roughness and Structure Features on Tribological Properties of Electrodeposited Nanocrystalline Ni and Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Coatings

Metal matrix composite coatings obtained by electrodeposition are one of the ways of improving the surfaces of materials to enhance their durability and properties required in different applications. This paper presents an analysis of the surface topography, microstructure and properties (residual stresses, microhardness, wear resistance) of Ni/Al₂O₃ nanocomposite coatings electrodeposited on steel substrates from modified Watt’s-type baths containing various concentrations of Al₂O₃ nanoparticles and a saccharin additive. The residual stresses measured in the Ni/Al₂O₃ coatings decreased with an increasing amount of the co-deposited ceramics. It was established that the addition of Al₂O₃ powder significantly improved the coatings’ microhardness. The wear mechanism changed from adhesive-abrasive to abrasive with a rising amount of Al₂O₃ particles and coating microhardness. Nanocomposite coatings also exhibited a lower coefficient of friction than that of a pure Ni-electrodeposited coating. The friction was found to depend on the surface roughness, and the smoother surfaces gave lower friction coefficients.     

Identification of Mg<Subscript>2</Subscript>Cu particles in Cu-alloyed austempered ductile iron

In the present work, the Mg₂Cu precipitates in copper-alloyed austempered ductile iron (ADI) were identified by analyzing techniques such as TEM and SEM with EDS. It was revealed that, in castings made of ADI-containing copper, highly dispersed particles of Mg₂Cu are formed, whose size does not exceed <1 μm. The research work was carried out on ductile iron that was austenitized at 900 °C, followed by austempering at 380 °C. The microstructure was investigated using various techniques, including optical microscopy, XRD, SEM, and TEM. In addition to this, the exhibited impact properties of castings with Cu, Ni, and Cu+Ni were also determined. This study casts a new light on the formation of the structure of Cu-alloyed ADI. The highly-dispersive and brittle Mg₂Cu particles that are located in the vicinity of the graphite nodules have a negative effect on the impact properties of ADI. It has also been shown that impact strength decreases from levels of 160-180 J (for copper-free ADI) to 90-120 J (for copper-and copper-nickel-alloyed ADI).     

Electropolishing and passivation of NiTi shape memory alloy

Electropolishing of NiTi alloy has been investigated. The influence of polishing bath composition and the operating conditions instead of the conditions of the process on the quality of the surface, evaluated by AFM and SEM methods, was established. Morphologically uniform surfaces were obtained only in the case of solutions containing hydrofluoric and sulfuric acids. Electropolished samples were sterilized and thermally passivated, then their corrosion resistance was measured in Tyrode's physiological solution. It was established that already after the electropolishing the corrosion resistance of NiTi alloy increases due to the spontaneously formed TiO₂ layer. The increase of the thickness of the layer during sterilization and thermal passivation causes further increase in the corrosion resistance.     

Adenosine Receptor Agonist HE-NECA Enhances Antithrombotic Activities of Cangrelor and Prasugrel in vivo by Decreasing of Fibrinogen Density in Thrombus

Blood platelets’ adenosine receptors (AR) are considered to be a new target for the anti-platelet therapy. This idea is based on in vitro studies which show that signaling mediated by these receptors leads to a decreased platelet response to activating stimuli. In vivo evidence for the antithrombotic activity of AR agonists published to date were limited, however, to the usage of relatively high doses given in bolus. The present study was aimed at verifying if these substances used in lower doses in combination with inhibitors of P2Y₁₂ could serve as components of dual anti-platelet therapy. We have found that a selective A_2A agonist 2-hexynyl-5’-N-ethylcarboxamidoadenosine (HE-NECA) improved the anti-thrombotic properties of either cangrelor or prasugrel in the model of ferric chloride-induced experimental thrombosis in mice. Importantly, HE-NECA was effective not only when applied in bolus as other AR agonists in the up-to-date published studies, but also when given chronically. In vitro thrombus formation under flow conditions revealed that HE-NECA enhanced the ability of P2Y₁₂ inhibitors to decrease fibrinogen content in thrombi, possibly resulting in their lower stability. Adenosine receptor agonists possess a certain hypotensive effect and an ability to increase the blood–brain barrier permeability. Therefore, the effects of anti-thrombotic doses of HE-NECA on blood pressure and the blood–brain barrier permeability in mice were tested. HE-NECA applied in bolus caused a significant hypotension in mice, but the effect was much lower when the substance was given in doses corresponding to that obtained by chronic administration. At the same time, no significant effect of HE-NECA was observed on the blood–brain barrier. We conclude that chronic administration of the A_2A agonist can be considered a potential component of a dual antithrombotic therapy. However, due to the hypotensive effect of the substances, dosage and administration must be elaborated to minimize the side-effects. The total number of animals used in the experiments was 146.     

Current Diagnosis and Treatment Options for Cutaneous Adnexal Neoplasms with Follicular Differentiation

Neoplasms derived from follicular tissue are extremely rare. Clinically, they are reported as non-symptomatic, slow-growing nodules. These lesions are mainly benign, but the malignant type can occur. Mainly middle-aged people (50–60 years of age) are affected. These carcinomas are mainly localized on the head and neck or torso. They can be locally aggressive and infiltrate surrounding tissue and metastasize to regional lymph nodes. In the minority of cases, distant metastases are diagnosed. Quick and relevant diagnosis is the basis of a treatment for all types of tumors. The patient’s life expectancy depends on multiple prognostic factors, including the primary tumor size and its mitotic count. Patients should be referred to a specialized skin cancer center to receive optimal multidisciplinary treatment. This article tries to summarize all the information that is currently available about pathogenesis, diagnosis, and treatment methods of follicular tumors.