Overview of the local production process of raw milk butter in Wallonia (Belgium)

This study aims to describe the procedures and practices used in local production of raw milk butter. The demand for local products is increasing; hence, there is a need to describe the practices used in the artisanal production of raw milk butter. Therefore, a survey of 147 raw milk butter producers was carried out. The results from the survey indicate that there is not one single way to produce butter at artisanal level. In terms of maturation, six temperature sequences were distinguished. Attention is required at every step of production starting from breeding.     

Viscosity reduction of isotonic solutions of the photosensitizer TPCS2a by cyclodextrin complexation

Meso-tetraphenyl chlorin disulphonate (TPCS_2a) is a photosensitizer (PS) particularly developed and patented for use in the technology of photochemical internalization (PCI) against cancer. TPCS_2a is known to aggregate in aqueous media even at low concentrations (≥0.1?µM) and to form a high-viscosity network at clinically relevant concentrations (mM). The aim of this work was to evaluate the effect of two hydroxypropylated cyclodextrin derivatives of beta and gamma type, respectively i.e. HPβCD and HPγCD, on the aggregation and solubilization of TPCS_2a in isotonic solutions. Samples containing micromolar concentrations of TPCS_2a were studied spectrophotometrically, while samples containing a clinical relevant concentration (10?mM?=?9?mg/ml) of TPCS_2a were evaluated by dynamic viscosity measurements. HPβCD was determined to be a more suitable solubilizer of TPCS_2a than HPγCD in aqueous media both in the absence and presence of salt. The complexation stoichiometry between TPCS_2a/HPβCD at micromolar to millimolar concentrations of TPCS_2a was determined to be 1:3 and 1:2 in the absence and presence of isotonic NaCl, respectively. The network of TPCS_2a (10?mM) was broken down in the presence of 3% w/v (=?20?mM) HPβCD, i.e. a 1:2 molar ratio between TPCS_2a and the cyclodextrin. Formation of the inclusion complex resulted in low viscosity samples both in water and in the presence of isotonic NaCl or phosphate buffered saline (PBS) at 25?°C and 37?°C.     

Archaeological Arsenical Bronzes and Equilibrium in the As-Cu System

Metallurgical and Materials Transactions B - Understanding the effects of impurities, segregation, undercooling, and solidification velocity is necessary to reconstruct prehistoric As-Cu alloy...     

Encapsulationof lycopene from watermelon in calcium‐alginate microparticles using an optimised inverse‐gelation method by response surface methodology

Lycopene exhibits strong antioxidant activity due to its unsaturated molecular bonds, which also contributes to its susceptibility for degradation. Encapsulation techniques can reduce lycopene degradation, increasing its potential applications in functional foods and nutraceuticals. The objective of this study was to optimise the encapsulation of lycopene from watermelon in alginate microparticles using the inverse gelation method. Box–Behnken design was used for the optimisation of three variables: concentrations of alginate (w/v %) and CaCl₂ (g L^?1), and gelation time (min). Two types of alginate were investigated (low viscosity and high viscosity) and optimised separately using encapsulation efficiency and loading capacity as responses. Results indicated that the models had a good fit to the experimental data and the optimal conditions varied depending on the type of alginate. In general, particles prepared with low‐viscosity alginate exhibited higher encapsulation efficiency and loading capacity and could be used for further research.     

Integrating Ecological,Social and Cultural Dimensions in the Implementation of the Landscape Convention

Implementation of the European Landscape Convention requires new tools that link ecological, social and cultural dimensions in practical planning. Here, we propose connectivity as a conceptual tool to include different dimensions into landscape and spatial planning. We present a short review of the connectivity concept in relation to ecological, social and cultural dimensions and illustrate it by examples from a real landscape planning case.     

Understanding of the annealing temperature impact on ion implanted bifacial n‐type solar cells to reach 20.3% efficiency

Ion implantation has the advantage of being a unidirectional doping technique. Unlike gaseous diffusion, this characteristic highlights strong possibilities to simplify solar cell process flows. The use of ion implantation doping for n‐type PERT bifacial solar cells is a promising process, but mainly if it goes with a unique co‐annealing step to activate both dopants and to grow a SiO₂ passivation layer. To develop this process and our SONIA cells, we studied the impact of the annealing temperature and that of the passivation layers on the electrical quality of the implanted B‐emitter and P‐BSF. A high annealing temperature (above 1000 °C) was necessary to fully activate the boron atoms and to anneal the implantation damages. Low J_0BSF (BSF contribution to the saturation current density) of 180 fA/cm² was reached at this high temperature with the best SiO₂ passivation layer. An average efficiency of 19.7% was reached using this simplified process flow (“co‐anneal process”) on large area (239 cm²) Cz solar cells. The efficiency was limited by a low FF, probably due to contaminations by metallization pastes. Improved performances were achieved in the case of a “separated anneals” process where the P‐BSF is activated at a lower temperature range. An average efficiency of 20.2% was obtained in this case, with a 20.3% certified cell. Copyright © 2014 John Wiley & Sons, Ltd.