Mechanisms of Enzyme-Catalyzed Reduction of Two Carcinogenic Nitro-Aromatics, 3-Nitrobenzanthrone and Aristolochic Acid I: Experimental and Theoretical Approaches

This review summarizes the results found in studies investigating the enzymatic activation of two genotoxic nitro-aromatics, an environmental pollutant and carcinogen 3-nitrobenzanthrone (3-NBA) and a natural plant nephrotoxin and carcinogen aristolochic acid I (AAI), to reactive species forming covalent DNA adducts. Experimental and theoretical approaches determined the reasons why human NAD(P)H:quinone oxidoreductase (NQO1) and cytochromes P450 (CYP) 1A1 and 1A2 have the potential to reductively activate both nitro-aromatics. The results also contributed to the elucidation of the molecular mechanisms of these reactions. The contribution of conjugation enzymes such as N,O-acetyltransferases (NATs) and sulfotransferases (SULTs) to the activation of 3-NBA and AAI was also examined. The results indicated differences in the abilities of 3-NBA and AAI metabolites to be further activated by these conjugation enzymes. The formation of DNA adducts generated by both carcinogens during their reductive activation by the NOQ1 and CYP1A1/2 enzymes was investigated with pure enzymes, enzymes present in subcellular cytosolic and microsomal fractions, selective inhibitors, and animal models (including knock-out and humanized animals). For the theoretical approaches, flexible in silico docking methods as well as ab initio calculations were employed. The results summarized in this review demonstrate that a combination of experimental and theoretical approaches is a useful tool to study the enzyme-mediated reaction mechanisms of 3-NBA and AAI reduction.     

Synthetic and Biological Studies of Sesquiterpene Polygodial: Activity of 9‐Epipolygodial against Drug‐Resistant Cancer Cells

Polygodial, a terpenoid dialdehyde isolated from Polygonum hydropiper L., is a known agonist of the transient receptor potential vanilloid 1 (TRPV1). In this investigation a series of polygodial analogues were prepared and investigated for TRPV1‐agonist and anticancer activities. These experiments led to the identification of 9‐epipolygodial, which has antiproliferative potency significantly exceeding that of polygodial. 9‐Epipolygodial was found to maintain potency against apoptosis‐resistant cancer cells as well as those displaying the multidrug‐resistant (MDR) phenotype. In addition, the chemical feasibility for the previously proposed mechanism of action of polygodial, involving the formation of a Paal–Knorr pyrrole with a lysine residue on the target protein, was demonstrated by the synthesis of a stable polygodial pyrrole derivative. These studies reveal rich chemical and biological properties associated with polygodial and its direct derivatives. These compounds should inspire further work in this area aimed at the development of new pharmacological agents, or the exploration of novel mechanisms of covalent modification of biological molecules with natural products.     

Preparation and Reinforcement of Dual‐Porous Biocompatible Cellulose Scaffolds for Tissue Engineering

Biocompatible cellulose‐based aerogels composed of nanoporous struts, which embed interconnected voids of controlled micron‐size, have been prepared employing temporary templates of fused porogens, reinforcement by interpenetrating PMMA networks and supercritical carbon dioxide drying. Different combinations of cellulose solvent (Ca(SCN)₂/H₂O/LiCl or [EMIm][OAc]/DMSO) and anti‐solvent (EtOH), porogen type (paraffin wax or PMMA spheres) and porogen size (various fractions in the range of 100–500 μm) as well as intensity of PMMA reinforcement have been investigated to tailor the materials for cell scaffolding applications. All aerogels exhibited an open and dual porosity (micronporosity >100 μm and nanoporosity extending to the low micrometer range). Mechanical properties of the dual‐porous aerogels under compressive stress were considerably improved by introduction of interpenetrating PMMA networks. The effect of the reinforcing polymer on attachment, spreading, and proliferation of NIH 3T3 fibroblast cells, cultivated on selected dual‐porous aerogels to pre‐evaluate their biocompatibility was similarly positive.     

Strain‐induced deformation mechanisms of polylactide plasticized with acrylated poly(ethylene glycol) obtained by reactive extrusion

This work aimed at identifying the tensile deformation mechanisms of an original grade of plasticized polylactide (pPLA) obtained by reactive extrusion. This material had a glass transition temperature of 32.6 °C and consisted of a polylactide (PLA) matrix grafted with poly(acryl‐poly(ethylene glycol)) (poly(Acryl‐PEG)) inclusions. pPLA behaved like a rubber‐toughened amorphous polymer at 20 °C, and its tensile behavior evolved toward a rubbery semicrystalline polymer with increasing temperature. The drawing of pPLA involved orientation of amorphous and crystalline chains, crystallization, and destruction of crystals. It was found that crystal formation and crystal destruction were in competition below 50 °C, resulting in a constant or slightly decreasing crystallinity with strain. Increasing temperature enhanced crystal formation and limited crystal destruction, resulting in an increased crystallinity with the strain level. Drawing yielded a transformation of the initial spherical poly(Acryl‐PEG) inclusions into ellipsoids oriented in the tensile direction. This mechanism may engender the formation of nanovoids within the inclusions due to a decreased density, assumed to be responsible for the whitening of the specimen. © 2015 Society of Chemical Industry     

Optimization of the spark plasma sintering processing parameters affecting the properties of polyimide

The present study deals with the optimization of polyimide (PI) mechanical properties, obtained by Spark Plasma Sintering (SPS), by using a method combining Design of Experiments (DOE) with physical, structural, and mechanical characterizations. The effects of SPS parameters such as temperature, pressure, dwell time, and cooling rate on the density, mechanical properties, and structure of PI were investigated. The experimental results revealed that the mechanical properties of the material were optimized by raising the sintering temperature up to 350°C. The optimized SPS processing parameters were a temperature of 350°C, a pressure of 40 MPa, and a dwell time of 5 min. Under these conditions, a relative density of 99.6% was reached within only a few minutes. The corresponding mechanical properties consisted of Young's modulus of 3.43 GPa, a Shore D hardness of 87.3, and a compressive strength of 738 MPa for a maximum compressive strain of 61.8%. Moreover, when working at 320°C and at 100 MPa, an increase in the dwell time was necessary to enhance the properties. Contrary to the other parameters, the cooling rate appeared to be a non‐significant parameter. Finally, correlations between the PI structure and the mechanical properties were made to demonstrate the densification mechanisms. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41542.     

Corrosion protective performances of commercial low-VOC epoxy/urethane coatings on hot-rolled 1010 mild steel

The protective properties of low-VOC epoxy/urethane paint systems of commercial grade have been investigated using a variety of techniques such as electrochemical impedance spectroscopy (EIS). One epoxy-polyamide mastic/urethane, three high-solid epoxy-amine/urethane coatings, one solvent-free epoxy-amine/urethane, one water-based epoxy-amine and one high-VOC alkyd paint system (used as paint reference system) were applied on hot-rolled 1010 mild steel panels and exposed for up to 2000 h in the salt spray cabinet (SSC) or for 1 year at an outdoor marine test site. These paints were tested for their barrier properties, corrosion-induced adhesion loss and visual defects, as well as for their flexibility and resistance to direct impact. The barrier properties increased in the following order: alkyd相似文献   

Positional distribution of Δ5-acids in triacylglycerols from conifer seeds as determined by partial chemical cleavage

The positional distribution of various Δ5-acids in the seed triacylglycerols from several conifer species has been established after partial chemical degradation with Grignard reagent. The species studied were representative of four conifer families and were specially selected for their particularly high Δ5-acid contents. These species were Taxus baccata (Taxaceae; 5,9-18:2 acid, 11.9%), Larix decidua (Pinaceae; 5,9,12-18:3 acid, 28.5%), Sciadopytis verticillata (Taxodiaceae; 5,11,14-20:3 acid, 16.7%), and Juniperus communis (Cupressaceae; 5,11,14,17-20:4 acid, 19.8%). Calculations from the fatty acid compositions of triacylglycerols and of the mixture of 1,2- and 2,3-diacylglycerols generated by the Grignard reagent indicated that, for the four species, there was a considerable enrichment of Δ5-acids (generally more than ten times) in the 1,3-positions as compared to the 2-position, where Δ5-acids represented always less than 2% of total fatty acids esterified to triacylglycerols. This distribution was practically independent from the species (four families studied), the chainlength (18 or 20 carbon atoms), and the number of ethylenic bonds (two to four) in the Δ5-acids. Similar distributions were established for triacylglycerols from the seeds of three pine species that are available on a ton-scale: Pinus pinea, P. koraiensis, and P. pinaster. These observations confirm and extend previous studies conducted with other conifer species by similar techniques or by ¹³C-nuclear magnetic resonance spectroscopy. Consequently, the almost exclusive location of Δ5-acids in the external positions of triacylglycerols is now well established and appears to be a general feature of conifer seed oils.     

In‐line near infrared spectroscopy monitoring of pharmaceutical powder moisture in a fluidised bed dryer: An efficient methodology for chemometric model development

This work proposes a novel chemometric methodology for in‐line near infrared spectroscopy (NIRS) monitoring of pharmaceutical powder moisture in a fluidised‐bed dryer. The collected spectra are analysed by multivariate chemometrics involving the preparation of numerous laboratory samples. A different methodology, using only plant samples, was tested in real‐time. A specially designed probe tip, allowing for robust in‐situ spectral acquisition, was designed. The results prove that NIRS can be as efficient as traditional quality analyses, e.g. loss‐on‐drying, in measuring powder moisture content in a fluidised bed dryer with a calibration model based only on plant samples. © 2011 Canadian Society for Chemical Engineering     

Barrier effect of flame retardant systems in poly(methyl methacrylate): Study of the efficiency of the surface treatment by octylsilane of silica nanoparticles in combination with phosphorous fire retardant additives

In this work, flame retardant systems comprising ammonium polyphosphate (AP423) and hydrophilic (A200) or hydrophobic (R805) nanometric silica were incorporated into PMMA. The following techniques were performed to detail the fire behaviour of the composites: mass loss cone calorimetry, pyrolysis‐combustion flow calorimetry, pyrolysis‐gas chromatography–mass spectrometry, thermogravimetric analysis, X‐ray diffraction analysis, Fourier transform infrared spectroscopy and microscopic observations. The best fire behaviour was obtained with the surface‐treated silica in the presence of AP423. The formation of a new crystalline phase from the interactions between AP423 and R805 silica and a strong barrier effect due to a layered residue were the main modes of action of this system. Moreover, we have shown that the difference between the AP423 + R805 and AP423 + A200 systems was due to poor dispersion of the silica into the PMMA matrix in the latter formulation. Copyright © 2011 John Wiley & Sons, Ltd.