Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4

Ball-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the surface. Compressive residual stresses have been previously measured by X-ray diffraction near the surface, revealing considerably high values at the maximum analyzed depth, in relation to other finishing processes such as shot peening. However, the maximum analyzed depth is very limited by using this technique. In this paper, the incremental hole drilling (IHD) technique is tested to measure residual stresses, being able to reach a 2-mm measuring depth. To that objective, a commercial strain gage is used and calibrated using finite element model simulations. A second Finite Element Model based on material removal rate is developed to obtain the equations to calculate the strain release through IHD. Finally, residual stresses are measured experimentally with that technique on two different materials, confirming that ball-burnishing increases the compressive residual stresses in layers up to 0.5?mm deep for the testing conditions, which is a good response to industrial needs. The method proves to be suitable, simple and inexpensive way to measure the value of these tensions.     

Control Charts with Variable Dimension for Linear Combination of Poisson Variables

This article analyzes the simultaneous control of several correlated Poisson variables by using the Variable Dimension Linear Combination of Poisson Variables (VDLCP) control chart, which is a variable dimension version of the LCP chart. This control chart uses as test statistic, the linear combination of correlated Poisson variables in an adaptive way, i.e. it monitors either p₁ or p variables (p₁ < p) depending on the last statistic value. To analyze the performance of this chart, we have developed software that finds the best parameters, optimizing the out‐of‐control average run length (ARL) for a shift that the practitioner wishes to detect as quickly as possible, restricted to a fixed value for in‐control ARL. Markov chains and genetic algorithms were used in developing this software. The results show performance improvement compared to the LCP chart. Copyright © 2015 John Wiley & Sons, Ltd.     

Analysis of bioenergy production at different levels of integration in energy-driven biorefineries

In this paper, a techno-economic and environmental assessment is performed to compare the stand-alone process and biorefinery ways to produce biodiesel, ethanol and butanol as potential cases for bioenergy production using fresh fruit bunches as raw material. Different levels of integration are considered (e.g., mass and energy integration, non-conventional technologies) along with the analysis of the process scale to determine the economic profitability and environmental impacts of the proposed cases. The results demonstrated that the biodiesel production based on the biorefinery concept has a positive effect on the profitability of the stand-alone process at different scales. The economic results were compared with data reported in the literature. Furthermore, the life cycle analysis of the proposed cases suggested that the deployment of the biorefinery concept at different levels of integration in the oil palm supply chain reduced the environmental impact of the biodiesel production, which was selected as the hotspot of the evaluated cases.     

Nursing records for discharge. Report of the nursing history

The quality of care within our health care system depends upon an active and dynamic communication which bridges the different levels of care (primary and hospital) and will permit a continuity of services between the distinct parts. To insure this success, the authors propose an outpatient nursing record that will follow the patient upon his or her discharge. This record, to be called the "Discharged Patient Report", will be directed to other medical professionals so that they can be informed of previous treatments that the patient has received. Included in the report will be items such as; the previous nursing interactions that were used on the patient, how problems were resolved, possible other solutions, and health care information given to the patient. Using the report in this way will give us a great tool to know our patients and better understand how to serve them.     

Analysis of interferograms with a spatial radial carrier or closed fringes and its holographic analogy

It is well known that an interferogram can be demodulated to find the wave-front shape if a linear carrier is introduced. We show that it can also be demodulated if it has many closed fringes or a circular carrier appears. A basic assumption is that the carrier fringes are of a bandwidth adequate to contain the wave-front distortion. This phase determination, called here demodulation, is made in the space domain, as opposed to demodulation in Fourier space, but the low-pass filter characteristics must be properly chosen. For academic purposes a holographic analogy of this demodulation process is also presented, which shows that the common technique of multiplying by a sine function and a cosine function is equivalent to holographically reconstructing with a tilted-flat wave front. Alternatively, a defocused (spherical) wave front can be used as a reference to perform the reconstruction or demodulation of some closed-fringe interferograms.     

Staphylococcal growth and enterotoxin production in the presence of meat cultures (non LAB)

The effect of meat cultures (non lactic acid bacteria) on the growth and production of enterotoxins and thermonuclease by Staphylococcus aureus was studied. Micrococcus varians did not affect growth nor the synthesis of metabolites. Levels of enterotoxins A, B and D produced by the respective S. aureus strains were reduced by S. xylosus, S. saprophyticus and S. carnosus. The two latter species prevented production of enterotoxin C₁ and S. xylosus markedly reduced the amount produced. The three coagulase-negative staphylococci showed little inhibitory effect on the growth of S. aureus. Penicillium nalgiovense did not show inhibitory activity against the four S. aureus strains. Debaryomyces hansenii slightly inhibited growth of the enterotoxin A-producing strain, but reduced enterotoxin synthesis at 30 °C. Thermonuclease was detected whenever enterotoxins were detected though the influence of the effector organism was dependent on the test strain.     

Fractional-Fourier-transform calculation through the fast-Fourier-transform algorithm

A method for the calculation of the fractional Fourier transform (FRT) by means of the fast Fourier transform (FFT) algorithm is presented. The process involves mainly two FFT's in cascade; thus the process has the same complexity as this algorithm. The method is valid for fractional orders varying from -1 to 1. Scaling factors for the FRT and Fresnel diffraction when calculated through the FFT are discussed.