Investigation of the degree of crystallinity of acrylonitrile-divinylbenzene copolymers

Using the wide-angle X-ray scattering method, the degree of crystallinity of suspension copolymers and terpolymers of acrylonitrile (AN) and divinylbenzene (DVB) were determined. Copolymers with various degrees of cross-linking (5%–50% DVB) were prepared in the presence of thermodynamically different solvents added in order to obtain porous structure. It was found that copolymers with a degree of cross-linking of 0.1% DVB have a crystallinity index below 0.2, although the crystallinity index of PAN obtained under the same conditions is 0.5. Owing to the solvation conditions, even in copolymers with a degree of cross-linking of 20% DVB, ordered regions occur, and dilution of the polymerization mixture with poor solvents cause a decrease in the degree of crystallinity of these copolymers. Terpolymers AN, butyl acrylate (BA) or vinyl acetate (VA) have less ordered structure for the same amount of DVB. Methacrylonitrile and DVB copolymers obtained under the same conditions as AN and DVB are amorphous.     

Effects of material combination on laser beam drilling of a metal foil using a cover plate

This research investigated the microdrilling characteristics of metal foils depending on the materials of the cover plates and metal foils in the cover plate-laser beam machining (c-LBM) process, which is a method to achieve better quality in metal foil machining with a given piece of equipment. Laser beam drilling using a nanosecond pulsed laser was carried out on 10-µm-thick stainless steel 304 (STS304), nickel, and copper foils with 100-µm-thick cover plates of each material. Consequently, STS304 was found to be an effective cover plate material for reducing the hole diameter and spatter deposition on metal foils. Compared to the results without using a cover plate, the average hole diameter and the area of spatter deposition decreased by up to 77% and 96%, respectively, by using the STS304 cover plate. Meanwhile, the thermal deformation of the STS304 and nickel foils was prevented by using a cover plate, while the copper foil was barely deformed even without a cover plate. Lastly, it was remarkable that the copper foil was drilled with approximately 67% lower pulse energy than the effective minimum pulse energy required to drill it by using the STS304 cover plate, resulting in a smaller hole with little spatter.     

Recent progress in continuous and semi-continuous processing of solid oral dosage forms: a review

Context: Continuous processing is an innovative production concept well known and successfully used in other industries for many years. The modern pharmaceutical industry is facing the challenge of transition from a traditional manufacturing approach based on batch-wise production to a continuous manufacturing model.

Objective: The aim of this article is to present technological progress in manufacturing based on continuous and semi-continuous processing of the solid oral dosage forms.

Methods: Single unit processes possessing an alternative processing pathway to batch-wise technology or, with some modification, an altered approach that may run continuously, and are thus able to seamlessly switch to continuous manufacturing are briefly presented. Furthermore, the concept of semi-continuous processing is discussed. Subsequently, more sophisticated production systems created by coupling single unit processes and comprising all the steps of production, from powder to final dosage form, were reviewed. Finally, attempts of end-to-end production approach, meaning the linking of continuous synthesis of API from intermediates with the production of final dosage form, are described.

Results: There are a growing number of scientific articles showing an increasing interest in changing the approach to the production of pharmaceuticals in recent years. Numerous scientific publications are a source of information on the progress of knowledge and achievements of continuous processing. These works often deal with issues of how to modify or replace the unit processes in order to enable seamlessly switching them into continuous processing. A growing number of research papers concentrate on integrated continuous manufacturing lines in which the production concept of “from powder to tablet” is realized. Four main domains are under investigation: influence of process parameters on intermediates or final dosage forms properties, implementation of process analytical tools, control-managing system responsible for keeping continuous materials flow through the whole manufacturing process and the development of new computational methods to assess or simulate these new manufacturing techniques. The attempt to connect the primary and secondary production steps proves that development of continuously operating lines is possible.

Conclusion: A mind-set change is needed to be able to face, and fully assess, the advantages and disadvantages of switching from batch to continuous mode production.     

Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-l-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78 % in BMS vs. 51.5 ± 12.20 % in AES vs. 34.7 ± 7.23 % in SES vs. 28.7 ± 7.30 % in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0–1.0) in BMS vs. 1.0 (range 1.0–1.0) in AES vs. 2.0 (range 2.0–2.0) in SES vs. 2.0 (range 2.0–2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88 % in BMS vs. 50.4 ± 14.87 % in AES vs. 34.5 ± 7.22 % in SES vs. 28.9 ± 7.22 % in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.     

Magnetic Ordering of Dy3+ Ions in RbDy(WO4)2 Single Crystal

The specific heat C(T) of the monoclinic RbDy(WO ₄ ) ₂ crystal has been studied at very low temperatures 0.2T1.9 K and in magnetic fields 0H0.38 T. The Neel temperature was shown to be equal to T_N = 0.818 ± 0.005 K. The experimental value of the effective exchange parameter was obtained to be equal to J/k = – 0.798 K. The C T) dependence below Neel temperature 0.5T_N0.99T_N ) is well described by 2D Ising model, whereas in the temperature region close above T_N (1.01 T_N2T_N) it can be described by neither 2D, nor 3D Ising model. The experimental and theoretical H-T_N diagrams for field H a are in a reasonable agreement for simple quadratic lattice.