Interaction of humic acid salts with drug preparations

The use of natural polymers that form complexes with drug preparations is promising in the development of drugs of new generation. The possibility of complex formation on the interaction of humic acid salts with papaverine, benzohexonium, and B-group vitamins was demonstrated by calorimetric and potentiometric titration. These interactions can occur between the charged groups of a humic acid macroanion and the positively charged centers of drug molecules. The degree of binding of drug preparations by a natural polymer macromolecule can be determined by the charge and the structure of their molecules.     

Modification of the surface of sheet glass (A Review)

The paper contains an analysis of the literature data on modification of the surface of sheet glass in order to impart heat-shielding, conducting, hydrophobic, x-ray-shielding, decorative, and other properties to glass. Various industrial and scientific entities engaged in production and development of modifying coatings are described. A classification of film coatings is offered, and the main production methods are considered. The effect of various factors on film coatings is analyzed. Translated from Steklo i Keramika, No. 4, pp. 3–7, April, 2000.     

Construction materials based on cullet

The results of the development of decorative, heat-insulating and soundproof construction materials based on glass cullet are discussed. The service parameters of the samples are determined and the optimum technological production schemes are developed. Translated from Steklo i Keramika, No. 1, pp. 4–6, January, 1999.     

Growth of large Ti:Sapphire crystals by horizontal directional solidification in argon atmosphere

We report the growth of large (110 × 200 × 50 mm) titanium-doped sapphire crystals by horizontal directional solidification in a protective atmosphere and their lasing characteristics. The crystals are shown to be suitable for the fabrication of lasing elements with a figure of merit above 150 and wavefront distortion within λ/6.     

An implantable closedloop asynchronous drug delivery system for the treatment of refractory epilepsy

In this paper, we present an implantable device for intra-cerebral electroencephalography (icEEG) data acquisition and real-time epileptic seizure detection with simultaneous focal antiepileptic drug injection feedback. This implantable device includes a neural signal amplifier, an asynchronous seizure detector, a drug delivery system (DDS) including a micropump, and a hybrid subdural electrode (HSE). The asynchronous detection algorithm is based on data-dependent analysis and validated with Matlab tools. The detector and DDS have a power saving mode. The HSE contacts are made of Platinum (Pt) encapsulated with polydimethylsiloxane (PDMS). Given the heterogeneity of electrographic seizure signals and seizure suppression threshold, the implantable device provides tunable parameters facility through an external transmitter to adapt to each individual's neurophysiology prior to clinical deployment. The proposed detector and DDS were assembled in ? 50 mm and ? 30 mm circular printed circuit boards, respectively. The detector was validated using icEEG recordings of seven patients who had previously undergone an intracranial investigation for epilepsy surgery. The triggering of the DDS was tested and a predefined seizure suppression dose was delivered ~16 s after electrographical seizure onsets. The device's power consumption was reduced by 12% in active mode and 49% in power saving mode compared to similar seizure detection algorithms implemented with synchronous architecture.     

Effect of titanium–magnesium catalyst morphology on the properties of polypropylene upon propylene polymerization in a liquid monomer

The effect of the particle size of an IK-8-21 domestic titanium-magnesium catalyst on the properties of polypropylene (PP) produced during the polymerization of propylene in a liquid monomer is studied. Catalysts with particle sizes of 20 to 64 μm are shown to have high activity and identical sensitivity to hydrogen and allow PP to be obtained with a narrow distribution of particles over size, high isotacticity, and close values of crystallinity, melting temperature, and physicomechanical properties. A slight decrease in the activity and bulk density of PP powder is observed when the average size of catalyst particles is increased from 20 to 43 μm. A more notable reduction in the activity and bulk density of PP powder is observed for catalyst with particle sizes of 62 to 64 μm. IK-8-21 catalyst is not inferior to its foreign analogues with respect to the properties of the resulting PP.     

Effect of ceramic surface treatments on the bond strength of different composite resins

This study was aimed to observe the relationship between the different surface treatments and the bond strength of both composite based adhesive cement and zirconia ceramic. Thirty-two zirconia ceramic discs were fabricated by following the instructions of manufacturer (5 × 5 × 1.5 mm). Four subgroups were obtained from the specimens according to the specified surface treatments respectively: (a) C: control groups: no treatment; (b) SB: sandblasting with 125 μm aluminum oxide particles for 10 s; (c) SC: silica coating for 10 s; (d) Nd :YAG laser . The composite resin specimens Panavia F and Clearfil SA were introduced and polymerized to the treated bonding areas. Afterwards the specimens were stored in distilled water at 37 °C during 24 h, and the shear test was applied. The data were statistically analyzed by ANOVA and Duncan tests. The bond strength was stated significantly higher in silica coating/Panavia F group (23.35 MPa). The lowest bond strength was stated in control groups cemented with Clearfil SA (12.25 MPa). As a result it was determined that the bond strength has affected the both surface treatments and cement types (p < 0.001). The silica coating –treated zirconia ceramic recorded a significant increase in mean bond strength values.