Photoluminescence decay rate of silicon nanoparticles modified with gold nanoislands

We investigated plasmon-assisted enhancement of emission from silicon nanoparticles (ncs-Si) embedded into porous SiO _x matrix in the 500- to 820-nm wavelength range. In the presence in the near-surface region of gold nanoisland film, ncs-Si exhibited up to twofold luminescence enhancement at emission frequencies that correspond to the plasmon resonance frequency of Au nanoparticles. Enhancement of the photoluminescence (PL) intensity was attributed to coupling with the localized surface plasmons (LSPs) excited in Au nanoparticles and to increase in the radiative decay rate of ncs-Si. It has been shown that spontaneous emission decay rate of ncs-Si modified by thin Au film over the wide emission spectral range was accelerated. The emission decay rate distribution was determined by fitting the experimental decay curves to the stretched exponential model. The observed increase of the PL decay rate distribution width for the Au-coated nc-Si-SiO _x sample in comparison with the uncoated one was explained by fluctuations in the surface-plasmon excitation rate.

PACS

78. 67. Bf; 78.55.-m     

Ring Opening of Epoxidized Soybean Oil with Compounds Containing Two Different Functional Groups

Epoxidized vegetable oils are desirable chemicals due to their eco‐friendly characteristics and their being a major source of many green products. Ring opening is one of the ways to convert these epoxidized oils to some new intermediates. The use of mono‐functional amines, alcohols, acid anhydrides and thioethers for epoxy ring opening has been reported in the literature. In this study, thioglycolic acid (TGA) bearing thiol and carboxylic acid as two different functional groups and methyl ester of thioglycolic acid (TGAME) were used. Currently, there is no reported literature describing epoxy ring opening using chemicals bearing two different functional groups simultaneously. In this way, two new polyols were synthesized, one with TGA (polyol 1) and one with TGAME (polyol 2). FTIR and ¹H‐ and ¹³C‐NMR spectroscopy confirmed that the ring was opened by the carboxylic acid group of TGA, and the thiol group was not involved in the ring opening whereas the ring was opened by the thiol group in the case of TGAME.     

Synthesis of water‐soluble and conducting polyaniline by growing of poly (N‐isopropylacrylamide) brushes via atom transfer radical polymerization method

Polyaniline‐graft‐Poly(N‐isopropylacrylamide) copolymers were synthesized by atom‐transfer radical polymerization (ATRP) of N‐isopropylacrylamide using polyaniline macro‐initiators. Polyaniline‐chloroacetylchloride and polyaniline‐chloropropionylchloride macroinitiators were obtained by the reaction of amine nitrogens of polyaniline with chloroacetyl chloride and 2‐choloropropionyl choloride, respectively. Both macroinitiators and graft copolymers were characterized by FT‐IR and ¹H‐NMR spectroscopy. The cyclic voltammetry (CV) and UV‐Vis spectroscopy studies showed that these copolymers are electroactive. The solubility test revealed that the polyaniline‐graft‐poly (N‐isopropylacrylamide) copolymers are water soluble or water/methanol soluble. The Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) images showed the growing of poly (N‐isopropylacrylamide) chains on polyaniline backbone. Investigation of thermal behavior of graft copolymers by thermal gravimetry analysis (TGA) confirmed the results obtained from AFM and SEM images. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphology and adsorption properties of chemically modified MWCNT probed by nitrogen,n-propane and water vapor

The poor compatibility of carbon materials with different dispersion media can be overcome by surface functionalization. In this work, multiwall carbon nanotubes (MWCNTs) were doped by oxygen and nitrogen at low concentrations. Morphological and structural changes caused by chemical treatment were monitored using nitrogen, propane and water vapor adsorption measurements. Pore size distribution (PSD) functions derived from various models are compared. The contribution of slit-shaped pores to the total surface area available for adsorbed molecules is smaller than that of cylindrical pores. Functionalities with heteroatoms (both O and N) enhance water adsorption onto MWCNTs. However, no statistical difference is observed between the water adsorption properties of O- or N-containing MWCNTs.     

Determining key colors from a design perspective using dE-means color clustering

Designing a mood board is a creative tool designers often employ at the start of a new (interior) design project. The colors of a mood board represent important information about the envisioned interior designs. In this article, we focus on digital mood boards and we propose a novel method to determine the mood boards' key colors from a design perspective using dE-means color clustering. This proposed algorithm includes a fixed initialization to overcome the non-deterministic nature of traditional k-means, and a merging step to ensure all colors in the calculated palette are at least a dE-threshold apart. Quantitative and qualitative results demonstrate that the proposed algorithm outperforms existing methods in determining the key colors from a design perspective. Additionally, we introduce a novel method to visualize the calculated color palettes that takes into account the contribution of individual pixels to the construction of the calculated color palettes. Finally, we demonstrate how the proposed algorithm can be used to characterize color palettes for various design styles like modern, industrial and art deco.     

Synthesis of mullite nanofibres by electrospinning of solutions containing different proportions of polyvinyl butyral

In this paper, the synthesis of continuous mullite (3Al₂O₃·2SiO₂) nanofibres by combination of the sol–gel and electrospinning technique is reported. To find out the optimum viscosity of the electrospinning solution for obtaining the high quality mullite nanofibers, solutions containing different amounts of polyvinyl butyral (PVB, 0–8 wt%) and the precursor sol were prepared for the electrospinning process. The precursor sol was made by using proper amounts of aluminium isopropoxide (AIP), hydrated aluminium nitrate (AN) and tetraethylorthosilicate (TEOS). Crystal phase, microstructure and thermal decomposition behaviour of the electrospun mullite nanofibres were investigated by conventional methods of analysis. The optimal amount of PVB in the electrospinning polymeric solutions was found to be between 4 and 6 wt% and the mullite nanofibres obtained as such were pure, smooth and uniform with diameter sizes of 85–130 nm after calcination at 1200 °C.     

Effect of Bacterial Infection on Ghrelin Receptor Regulation in Periodontal Cells and Tissues

The effect of bacterial infection on the expression of growth hormone secretagogue receptor (GHS-R) was investigated in periodontal cells and tissues, and the actions of ghrelin were evaluated. GHS-R was assessed in periodontal tissues of rats with and without periodontitis. Human gingival fibroblasts (HGFs) were exposed to Fusobacterium nucleatum in the presence and absence of ghrelin. GHS-R expression was determined by real-time PCR and immunocytochemistry. Furthermore, wound healing, cell viability, proliferation, and migration were evaluated. GHS-R expression was significantly higher at periodontitis sites as compared to healthy sites in rat tissues. F. nucleatum significantly increased the GHS-R expression and protein level in HGFs. Moreover, ghrelin significantly abrogated the stimulatory effects of F. nucleatum on CCL2 and IL-6 expressions in HGFs and did not affect cell viability and proliferation significantly. Ghrelin stimulated while F. nucleatum decreased wound closure, probably due to reduced cell migration. Our results show original evidence that bacterial infection upregulates GHS-R in rat periodontal tissues and HGFs. Moreover, our study shows that ghrelin inhibited the proinflammatory actions of F. nucleatum on HGFs without interfering with cell viability and proliferation, suggesting that ghrelin and its receptor may act as a protective molecule during bacterial infection on periodontal cells.     

Co-gasification of a lignite/waste-tyre mixture in a moving bed

The thermal treatment of waste-tyre by co-gasification with lignite was investigated on a commercial scale during the Lurgi gasification process. The experiments proved that this material can be treated in a mixture with lignite in the process of oxygen–steam pressure co-gasification in a moving bed, because a waste-tyre admixture improves the net calorific value of the raw gas obtained by 3% in comparison with that from the gasification of lignite alone. Further, it was found that the H₂S and CH₃SH contents in the raw gas are lower in the case of co-gasification than those from the gasification of lignite alone. Considering the very low reactivity of the char from waste-tyre and the resultant unburned carbon in the ash, the optimal content of the waste-tyre admixture in the gasified feed should not exceed 10 wt.%, whereas short-term increases of up to 20 wt.% will not cause any technological problems or significant economic losses.     

Characterisation of melt spun Ni-Ti shape memory Ribbons’ microstructure

NiTi alloys are the most technologically important medical Shape Memory Alloys in a wide range of applications used in Orthopaedics, Neurology, Cardiology and interventional Radiology as guide-wires, self-expandable stents, stent grafts, inferior vena cava filters and clinical instruments. This paper discusses the use of rapid solidification by the melt spinning method for the preparation of thin NiTi ribbons for medical uses. Generally, the application of rapid solidification via melt-spinning can change the microstructure drastically, which improves ductility and shape memory characteristics and leads to samples with small dimensions. As the increase in the wheel speed led to a reduced ribbon thickness, the cooling rate increased and, therefore, the martensitic substructure became finer. Furthermore, no transition from the crystalline phase to the amorphous phase was obtained by increasing the cooling rate, even at a wheel speed of 30 m/s. Specimens for our metallographic investigation were cut from the longitudinal cross sections of melt-spun ribbons. Conventional TEM studies were carried out with an acceleration voltage of 120 kV. Additionally, the chemical composition of the samples was examined with a TEM equipped with an EDX analyser. The crystallographic structure was determined using Bragg-Brentano x-ray diffraction with Cu-K?? radiation at room temperature.     

Behaviour of bone origin hydroxyapatite at elevated temperatures and in O2 and CO2 atmospheres

In the present work the behaviour of HAp extracted from pig bones at elevated temperatures up to 1000 °C in O₂ and CO₂ atmospheres has been studied. It has been found that CO₂ atmosphere arrests HAp decomposition. Chemical analysis and infrared spectroscopy reveal that no free CaO appears and no decrease of CO₃⁻² group concentration occurs in the material calcined in CO₂ atmosphere. In the O₂ atmosphere at elevated temperatures, CaO and CO₂ are emitted from the samples, although the remaining material retains the HAp structure as indicated by the X-ray diffraction.