Fabrication and Electromagnetic Properties of Conjugated NH<Subscript>2</Subscript>-CuPc@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>

Conjugated amino-phthalocyanine copper containing carboxyl groups/magnetite (NH₂-CuPc@Fe₃O₄) has been fabricated from FeCl₃·6H₂O and NH₂-CuPc via a simple solvothermal method and its electromagnetic properties investigated. Scanning electron microscopy and transmission electron microscopy revealed that the NH₂-CuPc@Fe₃O₄ was a waxberry-like nanomaterial with NH₂-CuPc molecules effectively embedded in the interior of Fe₃O₄ particles in the form of beads. Introduction of NH₂-CuPc effectively improved the complementarity between the dielectric and magnetic losses of the system, resulting in excellent electromagnetic performance. The minimum reflection loss of the as-prepared composite reached ?33.4 dB at 7.0 GHz for coating layer thickness of 4.0 mm and bandwidth below ?10.0 dB (90% absorption) of up to 3.8 GHz. These results indicate that introduction of NH₂-CuPc results in a composite with potential for use as an electromagnetic microwave absorption material.     

Indirect Measurement of Energy Density of Soft PZT Ceramic Utilizing Mechanical Stress

This paper reports on an indirect measurement of energy density of soft PZT ceramic utilizing mechanical stress. The method works analogous to the Olsen cycle and allows for a large amount of electro-mechanical energy conversion. A maximum energy density of 350 kJ/m³/cycle was found under 0–312 MPa and 1–20 kV/cm of applied mechanical stress and electric field, respectively. The obtained result is substantially higher than the results reported in previous studies of PZT materials utilizing a direct piezoelectric effect.     

Hybrid wavelet measurement matrices for improving compressive imaging

Compressive sensing principle claims that a compressible signal can be recovered from a small number of random linear measurements. However, the design of efficient measurement basis in compressive imaging remains as a challenging problem. In this paper, a new set of hybrid wavelet measurement matrices is proposed to improve the quality of the compressive imaging, increase the compression ratio and reduce the processing time. The performance of these hybrid wavelet matrices for image modeling and reconstruction is evaluated and compared with other traditional measurement matrices such as the random measurement matrices, Walsh and DCT matrices. The compressive imaging approach chosen in this study is the block compressive sensing with smoothed projected Landweber reconstruction technique. The simulation results indicate that the imaging performance of the proposed hybrid wavelet measurement matrices is approximately 2–3 dB better than that obtained using Gaussian matrix especially at higher compression ratios.     

Patch-based reconstruction of surfaces undergoing different types of deformations

We deal with the reconstruction of surfaces that deform under a variety of conditions. The deformation can range from no extension to a certain degree of extensibility. The deformed surface is reconstructed from a single image, given a 3D reference shape. This shape corresponds to the undeformed state of the surface and can be computed using any appropriate technique. In particular, we use homographies defined from two views of the surface. To proceed with the 3D reconstruction of the deformed surface, we assume that the deformations are locally homogeneous and that the overall surface deformation can be obtained by combining the local homogeneous deformations. For this purpose, the surface is split into small patches. For each patch, a mapping between the undeformed and the deformed shapes is computed. The mapping is specified by using the quadratic deformation model Fayad et al. (Proceedings of British Machine Vision Conference (BMVC), 2004). As a result, given the undeformed shape, we define an optimization procedure whose goal is to estimate the 3D positions of deformed points in each image. The optimization is performed on each patch, independently of the others. The experimental results show that this approach allows precise reconstruction of a wide class of real deformations.     

Security of Blind Signatures Revisited

We revisit the security definitions of blind signatures as proposed by Pointcheval and Stern (J Cryptol 13(3):361–396, 2000). Security comprises the notions of one-more unforgeability, preventing a malicious user to generate more signatures than requested, and of blindness, averting a malicious signer to learn useful information about the user’s messages. Although this definition is well established nowadays, we show that there are still desirable security properties that fall outside of the model. More precisely, in the original unforgeability definition is not excluded that an adversary verifiably uses the same message m for signing twice and is then still able to produce another signature for a new message \(m'\ne m\). Intuitively, this should not be possible; yet, it is not captured in the original definition, because the number of signatures equals the number of requests. We thus propose a stronger notion, called honest-user unforgeability, that covers these attacks. We give a simple and efficient transformation that turns any unforgeable blind signature scheme (with deterministic verification) into an honest-user unforgeable one.     

Instantiability of RSA-OAEP Under Chosen-Plaintext Attack

We show that the widely deployed RSA-OAEP encryption scheme of Bellare and Rogaway (Eurocrypt 1994), which combines RSA with two rounds of an underlying Feistel network whose hash ( i.e., round) functions are modeled as random oracles, meets indistinguishability under chosen-plaintext attack (IND-CPA) in the standard model based on simple, non-interactive, and non-interdependent assumptions on RSA and the hash functions. To prove this, we first give a result on a more general notion called “padding-based” encryption, saying that such a scheme is IND-CPA if (1) its underlying padding transform satisfies a “fooling" condition against small-range distinguishers on a class of high-entropy input distributions, and (2) its trapdoor permutation is sufficiently lossy as defined by Peikert and Waters (STOC 2008). We then show that the first round of OAEP satisfies condition (1) if its hash function is t-wise independent for t roughly proportional to the allowed message length. We clarify that this result requires the hash function to be keyed, and for its key to be included in the public key of RSA-OAEP. We also show that RSA satisfies condition (2) under the \(\Phi \)-Hiding Assumption of Cachin et al. (Eurocrypt 1999). This is the first positive result about the instantiability of RSA-OAEP. In particular, it increases confidence that chosen-plaintext attacks are unlikely to be found against the scheme. In contrast, RSA-OAEP’s predecessor in PKCS #1 v1.5 was shown to be vulnerable to such attacks by Coron et al. (Eurocrypt 2000).     

A novel two-channel continuous-time time-interleaved 3rd-order sigma-delta modulator with integrator-sharing topology

This paper presents a 3rd-order two-path continuous-time time-interleaved (CTTI) delta-sigma modulator which is implemented in standard 90 nm CMOS technology. The architecture uses a novel method to resolve the delayless feedback path issue arising from the sharing of integrators between paths. By exploiting the concept of the time-interleaving techniques and through the use time domain equations, a conventional single path 3rd-order discrete-time (DT) ΔΣ modulator is converted into a corresponding two-path discrete-time time-interleaved (DTTI) counterpart. The equivalent CTTI version derived from the DTTI ΔΣ modulator by determining the DT loop filters and converting them to the equivalent continuous-time loop filters through the use of the Impulse Invariant Transformation. Sharing the integrators between two paths of the reported modulator makes it robust to path mismatch effects compared to the typical time-interleaved modulators which have individual integrators in all paths. The modulator achieves a dynamic range of 12 bits with an OverSampling Ratio of 16 over a bandwidth of 10 MHz and dissipates only 28 mW of power from a 1.8-V supply. The clock frequency of the modulator is 320 MHz but integrators, quantizers and DACs operate at 160 MHz.     

Tensor-based methods for high-power amplifier identification and predistortion linearization

Aligned with the recent revolution of smart cities concept, a lot of work has been done to support the education process in direct or indirect way. In countries like Lebanon, in which the choice of school does not depend on the residence location, parents are becoming more and more selective in the quality of schools they are choosing for their children. This fact may lead parents to choose a modern and good school even if it is far from their residence. On the other hand, and even if the school was close enough, the traffic congestion would make the on-feet journey of the kid to the school very risky. Driving children to school is a solution. However, it consumes a lot of time and effort each day in the morning and the afternoon. Hence, school buses are commonly used by all schools to take the student from and to his home. Nevertheless, waiting the bus each day to arrive is an exhausting and a time-wasting mission. In this paper we present a smart transportation system for school buses that helps in saving parents’ time, by avoiding waiting school buses in the morning and then in the afternoon to return kids back, especially with the increasing traffic jams at these hours. The proposed mobile and web application is designed to help parents, school and the bus to communicate automatically and easily via the application in order to detect kids’ arrival time. The bus application side will notify parents few minutes before its approaching to their homes. Furthermore, the system will allow parents to inform the school and hence the bus application side about the absence of their kid. The system has been efficiently and dynamically designed and implemented so it can be hosted and used by any school administration without the need to any major modifications. It has been tested on a summer school to prove its efficiency and marked an important positive feedback from the school and the parents’ sides.     

Multi-antenna Decode and Forward Relay Selection over Nakagami-m Fading Channels

This paper analyzes the performance of opportunistic relay under aggregate power constraint in Decode-and-Forward (DF) relay networks over independent, non-identical, Nakagami-m fading channels, assuming multiple antennas are available at the relay node. According to whether instantaneous Signal-to-Noise Ratio (SNR) or average SNR can be exploited for relay selection, two opportunistic relay schemes, opportunistic multi-antenna relay selection (OMRS) and average best relay selection (ABRS) are proposed. The closed form expressions of outage probability and error performance for binary phase shift keying (BPSK) modulation of OMRS and ABRS are determined using the moment generating function (MGF) of the total signal-to-noise ratio (SNR) at the destination. Simulations are provided to verify the correctness of theoretical analysis. It is observed that OMRS is outage-optimal among multi-antenna relay selection schemes and approaches the Beamforming (BF) scheme known as theoretical outage-optimal very closely. Compared with previous single-antenna Opportunistic Relaying (OR) scheme, OMRS brings remarkable performance improvement obtained from maximum ratio combining (MRC) and beamforming, which proves that multiple antennas at the relays could provide more array gain and diversity order. It also shows that the performance of ABRS in asymmetric channels is close to OMRS in the low and median SNR range.